- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Piping >
- PREVOST
PREVOST piping
Inner diameter: 5 mm - 8 mm
Outer diameter: 8 mm - 12 mm
Inner diameter: 0.312 in - 0.5 in
Pressure: 375 psi
Inner diameter: 12.7 mm - 31.5 mm
Outer diameter: 20.6 mm - 45.7 mm
Pressure: 250, 275 bar
Specially designed to meet minimum bend radius Optimum cut and wear resistance Resistant to microbiological degradation Bonded tube and cover Lightweight compared to conventional rubber alternatives Increased lifetime Available ...
Outer diameter: 16 mm - 50 mm
Pressure: 16 bar
Pipes made of PVC for underground waterdistribution from diameter 16 to 50 mm - with BENOR quality label according to NBN EN 1452
Eupen Plastic Pipe Division
Outer diameter: 63 mm - 225 mm
Pressure: 20 bar
Pipes and fittings made of PVC for underground waterdistribution from diameter 63 to 225 mm - with BENOR quality label according to NBN EN 1452
Eupen Plastic Pipe Division
Outer diameter: 20 mm - 110 mm
Pressure: 12.5 bar
Pipes made of HD-PE for underground waterdistribution of drinking water with BENOR or DIN quality label
Eupen Plastic Pipe Division
Inner diameter: 4.65 mm - 26.62 mm
Outer diameter: 7.32 mm - 30.5 mm
Pressure: 80 bar - 276 bar
Speed Flow is manufactured from virgin PTFE resin with a double ASIS 304 stainless steel, high tensile braid to suit hydraulic fittings in high pressure applications.
XTRAFLEX NV
Inner diameter: 8 mm - 50 mm
Outer diameter: 9 mm - 51 mm
Temperature: -20 °C - 105 °C
... tube-shaped pliable spiral tube that is fitted with cables, conductors, tubes and wire assemblies. It is characterized by its optimum protection agianst mechanical wear and is ideally installed after cables have been ...
Inner diameter: 4 mm
Outer diameter: 8.6 mm
Pressure: 210 bar
... Inner tube made from smooth, seamless polyester extrudate Fabric lining made from synthetic fibres Protective casing made from smooth, seamless and imperforated thermoplastic polyurethane - Type - Hydraulic ...
Kramp
Neodymium doped Yttrium Aluminum Garnet (Nd:YAG) laser rods are solid-state laser crystals with high gain, narrow linewidth and low lasing threshold. It is used for pulsed high energy and high power applications. EKSMA Optics offers ...
We have a wide range in stock in order to meet most demands of plastic cores in record time. We offer the ability to customize the mandrels with prints, colors, materials, internal grooved or customized. Our mandrels are highly resistant ...
... fire fighting hoses with high quality for most demanding situations. All hoses are manufactured according to BS 6391-1983 TYPE 1 & TYPE 2. The Fireguard Model 107 & 108 synthetic fire hose ...
A one piece bend to simplify the construction when the ground connection pipe is further out from the wall of the house than the downpipe. This product is made of precoated galvanized steel in 0,6mm thickness. Because ...
LINDAB
Inner diameter: 0.05 in - 0.33 in
Outer diameter: 0.125 in - 0.5 in
Pressure: 0.8, 0.65, 0.5 MPa
SMC's series of polyurethane tubing is manufactured from Polyether resin, insuring the longest possible tube life due to its immunity to hydrolysis. Series TIUB inch size tubing is available in 8 "quick ship" colors, ...
Inner diameter: 4 mm - 10 mm
Outer diameter: 6 mm - 12 mm
Pressure: 0 bar - 36 bar
A range of flame and spark-resistant polyamide tubing with superior résistance to impact and abrasion, improving equipment durability, particularly in areas subject to weld spatter. Features/Benefrts: -Spark Résistance •Flame-retardant ...
Parker Fluid System Connectors Division Europe
Rely on Alfa Laval hygienic tubes for contaminant-free connections throughout your hygienic processing systems. For safety, reliability, and efficiency, choose the wall thickness, interior surface finish and tolerance that meet your precise ...
Inner diameter: 3 mm - 8.1 mm
Outer diameter: 7.9, 15.1 mm
Pressure: 1,500, 2,200 psi
Parker Polyflex High Pressure 2440D Hoses are developed for High and Ultra High Pressure applications. The excellent handling increases operator efficiency and long service life reduces costly down times. Superior safety ...
Parker Polyflex Division - Europe
Inner diameter: 25 mm - 400 mm
Outer diameter: 53 mm - 441 mm
Pressure: 10 bar
... couplings). Hose is ATEX approved for dimensions above 40mm. Couplings/Fittings Hoses are fitted with BLOC-END® and must be used to the following maximum working pressure: ID≤150mm: 10bar. ID>150mm: ...
Trelleborg Industrial Hose
Inner diameter: 6.3 mm - 25.4 mm
Outer diameter: 13.4 mm - 35.8 mm
Pressure: 8.8 MPa - 90 MPa
No-Skive braid Hose R161SN is designed for high pressure hydraulic applications in Petroleum base hydraulic and lubricating oils. temp range from -40 °C up to +100°C. Compatible with No-Skive fittings No-Skive braid ...
Parker Stratoflex
Inner diameter: 63 mm - 630 mm
Pressure: 0.2 MPa - 0.4 MPa
Temperature: 0 °C - 45 °C
Nominal diameter:63mm-630mm Pressure rating:0.2Mpa、0.25Mpa、0.32Mpa、0.4Mpa Suit able:Suitable for low pressure water delivery pipe irrigation, drip irrigation, drainage and other projects of the transmission and distribution ...
DaYu Water-saving Group Co.,Ltd.
Seamless and welded steel tubes with four categories of oil well pipes, boiler tubes, pipeline steel, mechanic structure steel including sixteen major products of oil pipes, high pressure boiler tubes, oil transportation ...
Outer diameter: 9.53 mm - 41.3 mm
Pressure: 0 bar - 45 bar
Description YP branch with B1 fire protection class foam insulation. Supplied with the necessary stabilisation inserts. Manufactured in accordance with EN 1254-1. Max. operating pressure: 45 bar (650 psi)
Inner diameter: 250 µm - 41,000 µm
Outer diameter: 600 µm - 44,000 µm
Temperature: -200 °C - 260 °C
... 25x28. Tubes can be cut at desired length. standard solutions are delivered in coils of 8 to25, 50, 100 m depending on tube diameter, bending radius and other technical restrictions. Extra lengths up to 500 m for ...
3P Produits Plastiques Performants
Suction hose Mostly used with these hoses are the rubber flange/steel backing flange and the Double Action flange. They can be supplied in any size, and depending on application, with 100% vacuum capability ...
Trelleborg Infrastructure
Inner diameter: 8 mm
Outer diameter: 50 mm
Pressure: 0 bar - 200 bar
UES hotmelt hoses are the reliable connections between hotmelt system and application head. At standard lengths of up to metres, the adhesive is kept at the set temperature, which ensures smooth application. The robust ...
Inner diameter: 30 mm - 203 mm
Pressure: 10 bar - 28 bar
Temperature: -20 °C - 80 °C
Hose for transfers, drainage, irrigation installations, sewage pumping, slurry and fertilizers, irrigation cannons, temporary installations (bypass), etc. Standard length: Available in 60m lengths. Other lengths on ...
KURIYAMA EUROPE
Pressure: 0 MPa - 200 MPa
... inspection well (the pipeline can also be excavated on site to make inspection well or enlarge the hole of inspection well, which will not result in irreparable fracture like ordinary concrete). The same material can ...
Shandong Longquan Pipeline Engineering Co.,LTD
Inner diameter: 0.375 in
Outer diameter: 0.563 in
Pressure: 200 psi
Reusable Rigid Fittings, Transparent Blue Constructed of Lightweight, Tough Reinforced Polyurethane 200 psi Working Pressure High Quality Brass Fittings Provide Strong & Durable Connection Fittings are Completely ...
Coilhose Pneumatics
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining