RAVAS indicators

Phase Sequence Indicator Series 243-12P & 244-12P Phase Sequence Indicators Electronic phase sequence indicators ensure correct phase rotation and the presence of all 3-phase supplies. ...

Now a complete family of data loggers to compliment our traditional family of temperature indicators. Every new device is equipted with an internal temperature sensor and USB connector. Thanks to the USBinterface you ...

EL10 DRO is suitable for automation. It has DIN standard enclosure for panel mounting. It also has soft touch keyboard which provides ease of operation and long life of keyboard. EL10 DRO is suitable for linear and rotary measurements. ...

Phase Indicator MODEL 8030 • Digital Phase Indicator with open phase checker • Phase indicator designed to check the presence of open phase and also the phase sequence by LED and ...

The style T sight glass has a plain straight through borosilicate glass tube with stainless steel flanged ends and is used to check for the presence of a liquid where there is intermittent flow, partially filled lines or entrained air. ...

F325 is a digital indicator for strain gage type sensors (DIN 96x48mm size). With analogue/digital hold function and high-speed signal processing capability (3000 times/sec.), it enables accurate measurements of pressure, ...

Technical Data 1. Measuring range: 0-50mm 2. Resolution: 0.01mm/0.0005inch 3. Accuracy: ±0.006mm 4. Display: LCD character 5. Data output: Yes 6. Battery: 3V CR 2032 environmental lithium battery 7. Working temperature: 0℃-40℃ 8. Relative ...

VW Indicator measure all types of Vibrating Wire transducers. Reading sensors - VW Strain Gauges - VW Piezometer - VW Load Cell - VW Rebar Stressmeter - VW Crack Gauge - VW Total Pressure Cell - VW NATM Stress Cell - ...

... Tempilstik is the industry's leading choice for use in the most critical jobs. - See more at: http://www.tempil.com/temperature-indicators/temperature-indicating-sticks/tempilstik/#sthash.S0ngExht.dpuf

The AR-225 consists in three high reliability instruments in one: indication of open phase, phase sequence and motor rotation. Big size crocodile clamp permit connecting easily to terminals of conmutation boards.

... values indication CAN 2.0 data interface The Digital indicator ZET 7178 is intended for indicating the data transmitted via the CAN network by the ZETSENSOR series digital sensors. The indicator ...

Parking space occupation status indicator, visible from 360º, red-green colour (2000 mcd). Input power: 24 V DC. Consumption: 0.7 W. Brightness intensity adjustable via the ultrasound sensor.

Characteristics Aluminum alloy enclosure, impact-resistant, dustproof, moisture-resistant Suitable for Zone 1 hazardous area Power LED light (Red): Turn on when power is supplied normally Ground LED light (Green): Turn on when ground ...

The PAN35-55-13 is a pilot light tri-led that allows you to display the presence of the 3 phases with or without the presence of the Neutral. Equipped with 3 indicators LED “high luminosity”, 7 choice ...

... Material Elasticity Indicator ●Load Cell Indicator ●Force Indicator ●Torque Indicator ●Pressure Indicator ●Acceleration Indicator ●Micro-Resistance ...

• Add on indicator for MPX chassis mount • 1, 4 or 8 way versions • Simple plug connection • LED - On board LED • TFR - Remote 24v lamp • RLY - Relay, volt free contact outputs The MPX indicator ...

IS-pB1 Panel Mount Indicator is a compressed, panel mount L.E.D. indicator available at lowest cost. It is a reliable unit with cost effective visuals and can be used in all hazardous areas. Every IS-pB1 ...

... configurations can be stored • Automatic detection of full-bridges and 2x quarter-bridges (strain rings) Application: The indicator X-315 displays four sensors signals individually and the sum off all signals. The simple ...

48 x 48 mm Size 5 Digit LED Display 50 times/sec (Relay 3CH Output) For: -Industrial weighing applications -Force, pressure & torque measurements Features: -24 Bit Sigma-Delta A/D converter for high accuracy -3 Set point ...

* Minimum depth indicator less than 0.5" (12.7 mm) of space required behind the panel * Fits 3/64 DIN standard cutout * 3 1/2 or 4 1/2 digit, 0.5" (12.7 mm) high LCD display with optional negative ...

Electric measure instruments ANALOG Dimensions (mm): 24x96, 48x48, 48x96, 72x72, 96x96, 144x144, 70x60, 90x80, 127x109. To be used as: ammeters, voltmeters, power factor meters, frequencimeters, wattmeters, varmeters, countermeters, ...

Panel Meter 96、72、48 Series Accuracy:class 3.0 Voltage:110V, 220V, 380V, 415V, 440V Frequency:45-55Hz, 45-65Hz, 55-65Hz, 47-53Hz, 57-63Hz, 450-550Hz, 450-650Hz, 550-650Hz,

Features Adopts digital communication between wind sensor and wind data display, effectively improve product reliability and anti-interference capacity. 12 bit resolution current signal output. Two-way relay alarm output, buzzer alarm, ...

OJO is a family of displays designed to monitor battery charge status, with a simple and attractive design. The main features of OJO are:  Easy to view and accurate information about the battery charge level, by providing real ...

NORIMETER – 360° analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable ...