- Hydraulics - Pneumatics >
- Pump >
- Industrial pump >
- Richter
Richter industrial pumps
Flow: 12 m³/h
Power: 0.37, 0.25 kW
Weight: 8, 12 kg
The FL20C centrifugal pump is well known for its small size and high performance. Despite their small size, these pumps can provide flows up to 12 m3/h with good outcomes. FL20C pumps ...
... consisting of Water Pumps, Thermostats, Thermostat Kits, Switches & Sensors, Coolant Flanges and Radiator Caps. In the quest to reduce engine emissions, there is a growing trend among vehicle manufacturers to use Electric ...
Flow: 0 m³/s - 40 m³/s
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C
Vertical immersion pumps are multistage centrifugal pumps for installation on the mounting flange of tanks. PUMPED LIQUIDS Light, non-explosive, clean or contaminated liquids. Water Cutting fluid Lubricants
Arancia Pumps
Flow: 0 m³/h - 110 m³/h
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C
Vertical in-line pumps Vertical and multistage centrifugal pumps. The in-line design enables the pump to be installed on pipes where the suction and discharge ports are on the same horizontal ...
Arancia Pumps
Flow: 0 l/min - 650 l/min
Pressure: 0 bar - 100 bar
Fluid temperature: 0 °C - 60 °C
High pressure pumps High pressure spindle pumps. Solution for deep boreholes and the high pressure clearance of chippings. PUMPED LIQUIDS Light, non-explosive, clean liquids with at least 5% of ...
Arancia Pumps
Flow: 72 m³/h - 1,277 m³/h
Head: 17 m - 150 m
... damage •Safe pump-end to minimize risk of electric shock or explosion •Simple and reliable operation Hydraulic Submersible Pump-ends The Godwin Heidra® 100NC (Non-Clog) hydraulic submersible pump ...
Alcon
Flow: 100, 120 l/min
Pressure: 8 bar
Power: 0.35 kW
The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their ...
NARDI COMPRESSORI
Flow: 115, 145 l/min
Pressure: 15 bar
Power: 1.1 kW
The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their ...
NARDI COMPRESSORI
Flow: 36, 43, 29, 35 m³/h
Pressure: 10 bar
Power: 1.9, 2.2 kW
The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their ...
NARDI COMPRESSORI
Flow: 0.7 m³/h - 9,370 m³/h
Pressure: 20 bar - 450 bar
Fluid temperature: -40 °C - 120 °C
... rupture detector available in multiple options: Exakta standard local visual Local visual via pressure gauge Pressure switch (any make, model or case material and signal type: analogue 4 – 20 mA, digital, HART protocol) Pressure ...
Seko S.p.a.
Flow: 11.3 l/h - 2,400 l/h
Pressure: 200, 95, 90 bar
Fluid temperature: -20 °C - 150 °C
Exakta’s broad experience in supporting customers throughout the most challenging projects has led to the development of Nexa XP, a special version of Nexa able to cope with extreme suction conditions and a wide range of chemicals. Nexa ...
Seko S.p.a.
Flow: 3.4 l/h - 660 l/h
Pressure: 124 bar
Power: 1.1, 1.5, 0.18, 0.25, 0.75 kW
... result is a pump that delivers metering precision and consistency for repeatable results and efficient chemical consumption. Reliability Nyva’s ATEX-approved design and zero-leakage profile provide operators with ...
Seko S.p.a.
Flow: 1.6 l/min - 25 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors ...
Anglada Pumps
Flow: 4.4 l/min - 66 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors ...
Anglada Pumps
Flow: 6.6 l/min - 100 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors ...
Anglada Pumps
Flow: 32 us gal/min
Pressure: 0 psi - 52 psi
WX10 (WX10K1A, WX10K1AT ) FEATURES Lightweight general purpose pump Easy starting Honda mini 4-stroke engine 37 gal./min capacity Weighs only 13.4 lbs. Garden hose adaptor, suction hose, clamps, ...
Honda Power Equipment
Flow: 74 us gal/min
Pressure: 0 psi - 52 psi
WX15 Lightweight general purpose pump Easy starting Honda mini 4-stroke engine Weighs only 20 lbs. 72 gal./min capacity Hose clamps and strainer included
Honda Power Equipment
Flow: 164 us gal/min
Pressure: 0 psi - 45 psi
WB20 (WB20XK2A ) FEATURES General purpose, centrifugal 2" pump Easy starting Honda OHV commercial engine 152 gal./min. capacity Durable silicon carbide mechanical seal Cast iron volute and impeller
Honda Power Equipment
Flow: 0 m³/h - 1,000 m³/h
Power: 1.3 kW - 310 kW
... Excellent flow passing properties Motors with high power density Robust and reliable COMPACT CHOPPER PUMPS CUT SUMP PROBLEMS DOWN TO SIZE The Flygt F 3069 chopper pump is specifically ...
FLYGT
Flow: 57 l/min
Pressure: 10 bar
... applications of low viscosity fluids, diesel, non aggressive fluids, short distances without reels. Needle valve for regulating pump speed is included. Designed for quiet and reliable operation and for 200l drums, spout ...
Wilhelmsen
Flow: 189 l/min
Pressure: 1.4 bar - 8.6 bar
Head: 8.8 m
The polypropylene diaphragm pump is built with the highest quality precision parts. Long lasting even when used with abrasive fluids, making this product very cost effective. Professionals turn to this pump ...
Wilhelmsen
Flow: 30 l/min
Pressure: 10 bar
1:1 CHEMICAL PUMP W/HOSE AND GUN The Unitor 1:1 chemical pump is ideal for use when applying cleaning chemicals before washing with high pressure or the Unitor Cleaning Jet. This unit has been developed ...
Wilhelmsen
Pressure: 63 bar
Power: 0.18, 0.12 kW
Fluid temperature: -10 °C - 60 °C
The pump is designed for the lubrication with plastic grease or oil of machines and equipment requiring continuous lubrication in small quantities. The lubricant is fed to each receiving point via ...
Zaklady Automatyki POLNA S.A.
Flow: 0.15, 0.25 l/min
Pressure: 400, 200 bar
Power: 0.75 kW
The pump is designed to lubricate friction nodes in machines and devices through dosing distributors (two-way feeders). It is recommended for use in high-load machines and devices, with a large number of lubrication ...
Zaklady Automatyki POLNA S.A.
Flow: 0.4, 0.2, 0.1 l/min
Pressure: 200, 320, 400 bar
Power: 1.1 kW
The pump is designed to lubricate friction nodes in machines and devices through dosing distributors (two-way feeders). It is recommended for use in high-load machines and devices, with a large number of lubrication ...
Zaklady Automatyki POLNA S.A.
Flow: 10 m³/h - 1,400 m³/h
Weight: 142 kg - 1,956 kg
The Linatex pump, type III R, belongs to the latest generation of successful wear-resistant and corrosion resistant slurry pumps and has an improved efficiency. It has in practice proven durable Linatex ...
Flow: 2,600 m³/h
Pressure: 10, 15 MPa
Head: 300 m
... mounted. Axial suction, radial discharge, suction and discharge flange pressure rating is the same. The axial force in the pump is balanced by the optimally designed sealing ring and balance hole, the paired tapered ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 1,000 m³/h
Pressure: 5 MPa
Fluid temperature: 30 °C - 230 °C
... are located on the same horizontal line, vertical installation, small footprint, easy installation. The pump has a separate bearing frame and the bearings are grease lubricated. The pump ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 2,000 m³/h
Pressure: 2.5 MPa
Head: 160 m
... petrochemical, chemical industry, coal chemical, refinery, pulp and paper, district heating, flue gas desulfurization and general industrial applications.
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 0 m³/h - 1,850 m³/h
Head: 0 m - 120 m
... operating in optimal condition. The pump utilizes a flexible coupling, which allows the internal pump component to be removed without dismantling of the motor from the pump or the pump ...
Pressure: 51.7, 34.3 MPa
Power: 596, 373, 969, 745, 1,193 kW
Length: 3,639 mm - 5,475 mm
Mud pump is used to circulate drilling fluid while drilling, it is the core part of drilling fluid circulation system, and it is composed of power end and fluid end. The products conform to API Spec 7k standards, and ...
Output diameter: 60.3 mm - 88.9 mm
... -salt pump, through bridge pump, deflecting well pump, anti-powdered coal pump and so on special well oil pump. Technical Features 1. The pump ...
Flow: 50 l/min
Pressure: 360 mbar
• Extreme compactness and solidity • High efficiency (up to class A ++) • Integrated heating element • Pressure: 360 mBar – Flow rate: 50 L / min Applications • Domestic and professional dishwashers
Power: 20 W - 400 W
• Asynchronous and brushless motors for rotary vane pumps (flow rates 50-350 l/h) • Low vibrations and noise • Compatible with magnetic drive pumps or mechanical drive pumps ...
Flow: 20 l/min
Pressure: 20 bar
Fluid temperature: 60 °C
Three-diaphragm pump with reinforced Polypropylene circuit, Kynar/AISI 316 valves (LFP version), AISI 316 diaphragm mounting components, Viton seals. Version: SP (cylindrical with shaft key), CR (reduction gearbox ...
Annovi Reverberi
Flow: 55, 71, 87 l/min
Head: 23, 16, 10, 7 m
Power: 450, 250 W
... ventilated universal motor. The lightweight, handy and powerful device can be used as drive for the pump tubes of the laboratory and drum pumps and is useful in this combination for many thin fluid, ...
Dr. Jessberger GmbH
Flow: 82, 61 l/min
Head: 9, 20 m
Power: 460 W
... aggressive vapours of acids and alkalies are present. The standard in the on/off switch integrated low voltage release is intended to prevent an uncontrolled start of the drum pump motor after a power ...
Dr. Jessberger GmbH
Flow: 55, 66 l/min
Head: 7.5, 15 m
Power: 400 W
The drum pump motor JP-164 is a compactly built, not explosion-proof, internally ventilated universal motor, that has proven itself for slightly viscous media as diesel in agricultural field and at fire brigades foaming ...
Dr. Jessberger GmbH
Power: 17.6 kW
Length: 1,130 mm
Width: 740 mm
... rate, high-quality seals and an automatic low-oil shut-off system. All of our ENDRESS motorised pumps are self-feeding suction pumps based on the centrifugal pump principle and are driven ...
... saving - More hygienic pump - Fully drainable - Semi-open impeller. - Greater efficiency - Volute casing - Up to 800 cP - Design that complies 3A and EHEDG standards - Same footprint of a QC+ Pump Advantages QIS ...
Q-Pumps
Flow: 1.2 l/h - 35 l/h
Pressure: 0 bar - 10 bar
Power: 33, 20 W
... pressure strokes. Solenoid diaphragm pumps consists of the follwowing (main) components: Drive housing with solenoid Elektronics with connection on the control panel Built-in pump ...
Flow: 0.5 l/min - 12 l/min
Pressure: 20 bar
Power: 1.8 kW
The m-tec speedy-MP is an easy-to-handle pump for processing soft materials or pumpable products such as structured or decorative renders with a granularity of up to 2 mm. It is mainly used to pump creative ...
M-TEC Mathis Technik
Flow: 3 l/min - 22 l/min
Pressure: 30 bar
Power: 4 kW
The m-tec P20 is a compact pump for processing soft materials or pumpable products with a granularity of up to 4 mm. The P20 is mainly used to pump basic, decorative, synthetic resin ...
M-TEC Mathis Technik
Flow: 3 l/min - 24 l/min
Pressure: 30 bar
Power: 4 kW
... m-tec m-tec pump is the perfect entry-level model for the automation and automation and 3D printing sector. Advantages Easy adaptation to different materials due to infinitely variable power control Problem-free ...
M-TEC Mathis Technik
Flow: 66 l/min
Pressure: 1.5 bar - 2.8 bar
Head: 34, 45, 53 m
Self-priming centrifugal multi-stage pump For pumping rainwater out of storage tanks Rubber feet to suppress pump vibration and noises Integrated stainless-steel dirt trap Suction end with 1“ nozzle Optionally ...
The archimedean screw pump is suitable for the lifting of water and sludge in civil or industrial wastewater treatment plants. The main characteristics of its operation are the big flow ...
Flow: 20 m³/h - 180 m³/h
Pressure: 20, 25 bar
When developing this exceptional pump, we intended to set new standards in double-screw technology. We started by rethinking functional principles from the ground up and eliminated previously known deficiencies typically ...
FRISTAM
Based on the proven centrifugal pumps of the Fristam FP range, the shear pump has a new, efficient mixing method. A rotor/stator system which operates at tip speeds of up to 38 m/s is utilized instead ...
FRISTAM
Flow: 0 m³/h - 80 m³/h
Pressure: 0 bar - 15 bar
The FZ series, manufactured by Fristam Pumpen, is a centrifugal pump that offers comprehensive results for high suction operations. his device runs with a 15 bar system pressure and a 6.5 bar discharge pressure. Furthermore, ...
FRISTAM
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining