Applications composed by flanges and fittings necessary to couple pumps and PTO’s with different standards, such as ISO, SAE, DIN, etc.
Serie AG Attack Fork Manufacturer - Chiavette Unificate S.p.A. Part Number - AG4
Torque: 112,984 Nm
the first, the finest... flexible coupling with Fully-Crowned Gear Teeth. In contrast with ordinary gear tooth forms, the Amerigear Fully-Crowned Tooth represents the ultimate achievement in the art of gear tooth design, ...
Ameridrives Couplings
Torque: 5,000 Nm
Rotational speed: 8,000 rpm
The rigid couplings are used if there is no displacements or misalignment of the shafts to be connected. Inner-Ø up to 80mm, Special designs on request Features • Torsionally stiff and backlash-free • ...
Torque: 62 Nm - 4,022 Nm
Schmidt Inline Couplings - L400 Series Schmidt Inline Couplings are a torque-rigid type, designed with two pairs of parallel links installed 90 degrees out of phase with each other. ...
Torque: 316.35 Nm - 56,492.41 Nm
Schmidt 5-D Couplings were developed to fill a gap in the family of torque-rigid couplings. Most couplings in the Schmidt Coupling line are designed ...
Phas-Lok Adjusting Hubs provide easy and accurate phase adjustment. The Phas-Lok Adjusting Hub is an economical, yet precision device. It provides an easy way to change the phase relationship of a drive component and the shaft. It is ...
Torque: 0.0565 Nm - 282.4621 Nm
Magnetic couplings offer a non-contact transfer of torque. They are typically used in magnetic drive pumps and magnetic mixers for seal-less applications; keeping corrosive, toxic, or flammable liquids from escaping into ...
... slipping coupling: Serve as overload protection when connecting two shafts. They consist of an RT slip hub and a chain coupling; Advantages of RK slip coupling: Low maintenance Easy ...
A quality line of standard duty couplings that are assembled in Mexico using USA steel and gaskets. Manufactured with the same high quality as our other couplings, but at a lower price point. In full ...
Rotational speed: 310 rad.min-1 - 14,500 rad.min-1
... gear couplings have been hardened by induction or nitration. Connection parts are used hammering in enclosed metrices and being tempered after the productions. Coupling Types: • Full-Flex Gear Couplings, • ...
Torque: 0.3, 2, 4, 1, 0.5 Nm
Rotational speed: 9,500, 7,600, 6,100, 4,800, 4,000 rpm
Rigidity coupling – Aluminum alloy – Clamping screw Light, very low inertial and high sensibility Maintenance free, super anti-oil and corrosion-resistance Beam type with no allowable offset almost, please show the axis ...
Torque: 0.3, 0.5, 1, 2 Nm
Rotational speed: 9,500, 7,600, 6,100, 4,800 rpm
Rigidity coupling – 2 Pieces - Stainless steel – Clamping screwLight, very low inertial and high sensibility Maintenance free, super anti-oil and corrosion-resistanceBeam type with no allowable offset almost, please show ...
Torque: 51 Nm - 4,000 Nm
Harmony in perfection: Our shrink discs are ideally adapted to your extremely compact hollow shaft or mounted shaft connection. This means maximum performance of your drive! The best accessories for the best gearbox in order to achieve ...
Torque: 5.6 Nm - 90 Nm
Rotational speed: 0 rpm - 28,000 rpm
Torque: 315 ft.lb - 666 ft.lb
... Applications needing to connect a hollow shaft over a solid shaft. Commonly used on hollow output shaft gear boxes or flange couplings. B-LOC SD10 Series 36-10 Shrink Discs are external locking devices that provide ...
Fenner Drives
Torque: 5,000 Nm
Rotational speed: 2,500 rpm - 10,000 rpm
This range of torsional couplings solve torsional vibration problems typical of those found in diesel engine applications. The torsional coupling dampens torsional vibrations and tunes the system to have ...
jbj Techniques Limited
Torque: 34 Nm - 73,000 Nm
Rotational speed: 50 rpm - 1,500 rpm
... to the output. The INKOMA – PK-coupling transmits torque without any radial loads on related bearings. The INKOMA – PK-coupling is dynamically balanced and absorbs radial vibrations. The INKOMA ...
INKOMA, ALBERT
Steel Shaft Collars Material: Low Carbon Steel Finish: Zinc Plate Set Screws Furnished Tolerances on I.D. +.005 -.000 Available in FixtureProTM Design Software and PartSpec CD
Rigid coupling Clamp coupling DIN 115 Clamp coupling steel/ stainless steel one-piece/two-piece design Flange coupling DIN 116
Rotational speed: 4,000 rpm
Our range of solid couplings (rigid couplings) are available in stainless steel or aluminium, are primarily used for connecting two accurately aligned shafts. The design of the coupling ...
Torque: 361.5515, 19.2074 Nm
Rotational speed: 4,000 rpm
Ruland CLC-12-12-F is a one-piece rigid coupling with 0.7500" x 0.7500" bores, 1 1/2" OD, 2 1/4" length, and 3/16" x 3/16" keyways. It has precision honed bores to ensure they are collinear and do not ...
Ruland Manufacturing Co., Inc.
Stainless steel, Material-No. 1.4305 (AISI 303). Ready-to-install, with 4 mounting holes, match with clamp collars for splie hubs. C/d = 0,05
Torque: 6.86 Nm - 725 Nm
Rotational speed: 1,450 rpm
Bellhousings are the mechanical elements used to connect an electric motor equipped with standard flange to a hydraulic pump, thus forming the pump/motor unit. The bellhousings of this range allow to establish a perfect assembly between ...
Torque: 160 Nm - 10,300 Nm
Rotational speed: 1,700 rpm - 5,000 rpm
... °C Product description:Torque is transmitted via elastic coupling sets, that are in evenly placed pockets around the periphery of coupling part 1 type A The corresponding cams of coupling ...
APSOparts®
Tolomatic quick disconnect bushings and hubs are designed to be used together. Bushings and hubs are available for use with 6-5/16-, 8- and 10-, 12- and 16-inch Tolomatic disc sizes. • Fast, easy installation • Easily disconnect disc ...
With U-Clip Uhing set aside the Easylock quick clamping system a simple and low-priced alternative. As Easylock U-Clip is using a clamping ring, too which is offset to the shaft and therefore clamping forces and provided. Like a bushing ...
Bore Sizes 1/8" to 3" Non-Magnetic suitable for temperatures up to 800°F. Ideal for applications requiring hygienic cleanliness. All collars complete with standard hollow point setscrews CSC Series Design provides convenient setting, ...
Boston Gear
Please specify:
Help us improve:
remaining