RITTAL supports

... Aluminum die-cast Oberfläche: blank Tip: Compatible double T-slot nut/hammer screw see 096HK1045M0830 and flange nut floor mount base on request

Support system for standard applications: FP AP Glass fibre reinforced polyester, 0% halogen Brackets for wall-mounting or mounting on or suspending from rails Widths 100 to 950 mm Reinforcement ...

Monobloc support system: FP AM Glass fibre reinforced polyester, 0% halogen Widths 100, 150, 200 and 300 mm Rail centring ribs Endcap

Support system for compact footprints: FP IP Glass fibre reinforced polyester, 0% halogen Small footprint Recommended where space is small Suitable for irregular walls Optimum use for low-width cable trays Widths ...

Adjustable brackets for various suspension rods are available in a variety of sizes to fit most crossarms. These brackets fit steel tubing sizes 1 1/4″, 1 1/2″, 1 3/4″ and 2″.

The pivoting saddle allows the pointed air rods and conductors to be fixed on a non-horizontal

The kit consists of a brass mounting base with fixing screws for the air rod (for flat conductor) or a copper collar placed at the base of the air rod (for round

Hydraulic work supports are used to support the workpieces in a specific plan and prevent vibration during machining. Different versions exist : •The rod is extended at rest •The rod may be in any ...

Antenna extension Design: Antenna extension with magnetic base for better positioning of the antenna and for optimum transmission and reception power. Connection cable: 1.5 metres Connector: straight Application: The antenna ...

DonadonSDD disc holders are designed in order to ensure maximum reliability to DonadonSDD rupture discs. Disc holders designed to be mounted between flanges such as HI/A and HR/A have: an internal ...

DonadonSDD disc holders are designed in order to ensure maximum reliability to DonadonSDD rupture discs. HI/F and HR/F flanged disc holders, previous code AZ-60, have been designed to be fitted directly on the piping. ...

DonadonSDD disc holders are designed in order to ensure maximum reliability to DonadonSDD rupture discs. HI/P and HR/P pre-tightened disc holders offer the following advantages: Easy to install ...

... an adjustment of 360 °. Suitable for applications exposed to accidental impact State of supply 1 flange connector, 1 sensor holder connector and 1 aluminium cross connector; 1 M6x16 socket head screw, 3 M6x14 socket head ...

Use: machine control panel support. Possibility to run cables through the tube Kit ready for installation. State of supply 2 angle connectors, 2 aluminium swivel supports, stainless steel tubes, galvanised ...

Use:machine control panel support. Possibility to run cables through the tube. Material 2 pedestal connectors, 1 angle connector, 1 AISI 304 steel tube segment, galvanised steel nuts and bolts.

Conductor holder for flat roofs where it is not possible to drill in order to secure the conductor, such as bitumen roofs. To be filled with cement. The lip at the bottom of the cone allows it to be embedded in ...

Details Optical stages from Ocean Insight are versatile accessories for reflection and transmission measurements of flat substrates. Versions are available for single-point reflection measurements and for multipoint reflection and ...

Details Reflection probe holders are sturdy, simple to use mechanical fixtures for positioning reflection probes at 45° and 90° to flat surfaces. Options are available for 1/4" (6.35 mm) and 1/8" (3.17 mm) OD probes, ...

... inspection. The IG rupture disc holder features an inclined seat and is designed for forward acting rupture discs. The 30° oblique seating arrangement creates the optimum seal for the rupture disc ensuring leak tight ...

... rupture disc holder outlet performs a support function and guarantees the optimal opening behaviour when the defined burst pressure is reached. The integrated pre-assembly bolts allow an easy and safe ...

The use of two rupture discs in combination allows the process to continue safely after one disc has been destroyed as the process is still secured by a second (closed) disc. For this reason, production processes that use toxic or corrosive ...

The RPH-1 is to be used with our standard reflection probes, which are 6.5mm in diameter. The holder enables positioning of the probe tip in two angles: 45 degrees for diffuse reflection measurements and 90 degrees (normal ...

... separate fibres for illumination and detection. All 11 holes have a diameter of 1.6mm and are equipped with a setscrew to mount the probes or fibres into position. The AFH-15 is made of black anodized aluminium.

... challenging but the AFH-Ocular makes the job easier. The ocular enables visual location of the measurement spot on your sample. The holder is used in conjunction with our miniaturized reflection probe (FCR-7UVIR100-2-1×25) ...

Purpose built frame for Elizabeth Europe solutions Elizabeth Europe puts forward adapted feeding solutions: - different purpose-built for each feeder solution: chute feeder, vibratory feeder, brush box, tube feeder; economical and ...

For installation of enclosures, PCB and other parts onto a DIN rail. Robust metallic material allows rigid mounting on DIN rails. Simple installation and removal via the pull lever. Max load : 10kg 【Materials】 Base, Lever : Plated ...

■ Plastic wall mounting bracket. Easy attachment and removal. ■ Large and small brackets are available. ■ Applicable not only for the PF series, but also other plastic/metal enclosures with a panel thickness of 0.8 ...

■ NOTE Before installation, please ensure that the lever is not fully hidden behind the enclosure ■ For installation of enclosures, PCB and other parts onto a DIN rail. ■ Simple installation and removal via the pull lever.

Application area: for application and mounting in control cabinets • Dimensions (LxWxH) approx. 122 x 51 x 5 mm • Material metal • Mounting on 35mm DIN rail • For cable diameter up to 9 mm • Cable guides 6 • Fixing of the ...

The Support one range was designed to obtain a simple and quick system to mount electronic equipment onto DIN Rails (EN 60715). Italtronic offers the modular version (M) obtaining different sizes by assembling ...

As a result of extensive market research to meet the needs of the Customer, Italtronic has developed a new range of innovative DIN rail enclosures. This range of products represents a new generation of open PCB carriers to facilitate ...

Security Tablet Mount with Built-in Keylock, suitable for HANNspree 10.1’’ Tablet PC’sSN1ATP2B – SN1ATP3B Ideal for kiosks, POS, businesses, schools, retail, offices, lobbies, hotels, hospitals, events, etc. Anti-theft ...

13.3’’ Metal Security Tablet PC Mount Security Tablet Mount with Built-in Keylock, suitable for HANNspree 13.3’’ Tablet PC’sSN14TP1B Titan 2 Ideal for kiosks, POS, businesses, schools, retail, ...

Height Adjustable Stand Compatible with 19″ ~ 22″ monitors VESA 100 x 100 and 75 x 75 mm 4 in 1 Function: Height Adjustable 110mm / Tilt: -5°~ 19 ° / Pivot: 90° / Swivel 30° Left ~ 30° Right Durability: Height Adjustable ...