Sacemi electric pumps

Flow: 4, 3.4, 4.5, 3, 2.6 m³/h
Pressure: 7 bar

The C 30 series Neptune pneumatic water pump is an enhanced hose setup that generates 7 bar pressure rating. This system is mounted to a 5-meter hose which delivers the media into the pump. The compressed ...

Flow: 120, 100 m³/h
Pressure: 10 mbar
Weight: 35 kg

Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve.

Flow: 40, 48 m³/h
Pressure: 10 mbar
Power: 1.1 kW

Cast iron pumping unit coupled to the electric motor via an elastic coupler. Equipped with a support base, air intake check valve and cooling fan. Accessories: Air filter, gas ballast ...

Flow: 72, 60 m³/h
Pressure: 10 mbar
Power: 1.5, 76 kW

Cast iron pumping unit coupled to the electric motor via an elastic coupler. Equipped with a support base, air intake check valve and cooling fan. Accessories: Air filter, gas ballast ...

Flow: 35, 40, 50 l/min
Head: 55, 46, 38 m
Power: 0.6, 0.52, 0.37 kW

... - Continuous duty ENGINE - Two-Pole induction motor (n = 2850 min-1) - Insulation Class F - Protection IP 44 MATERIALS - Pump body: Cast Iron - Motor Support: ...

Flow: 35 l/min
Head: 38 m
Power: 0.37 kW

... . - Continuous duty ENGINE - Two-Pole induction motor (n = 2850 min-1) - Insulation Class F - Protection IP 44 MATERIALS - Pump body: Brass - Motor Support: Cast ...

Flow: 40, 60 l/min
Head: 38, 58 m
Power: 0.37, 0.6 kW

... - Continuous duty ENGINE - Two-Pole induction motor (n = 2850 min-1) - Insulation Class F - Protection IP 44 MATERIALS - Pump body: Cast Iron - Pump body cover: ...

Flow: 5,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 0.7 kW

... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components • Polypropylene (Moplen) pump ...

Flow: 25,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 4 kW

... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components. • Polypropylene (Moplen) pump ...

Flow: 5,000 l/h
Pressure: 1.8 bar
Power: 0.7 kW

... bar): ca. 1,8-2 N.B. The filter pumps of the series CESE marked with the letter “M” are equipped with a magnetic entrainment pump, which is designed without mechanical seal. This constructional feature ...

Fluid temperature: 50, 200, 80 °C

... smoothly. BZ SELF-PRIMING PUMP BZ Self-priming pump is a new pattern of energy-saving pump in 1990s．It has simple structure，stable function and feature of less noise．It is sealed ...

... centrifugal pump is based on the conversion of electrical energy into mechanical energy, which is then used to move liquids through pipes or tubes. The pump consists of an electric motor, ...

Flow: 4 m³/h - 1,200 m³/h
Head: 8 m - 150 m
Power: 2.2 kW - 180 kW

... Hydraulic pump develops into HOT WATER CIRCULATION PUMPS (KYWR/KYLR), chemical engineering pump (KYHL), oil pump (KYYG) and ex proof chemical pump (KYHY) ...

ALLOWS THE DESIRED QUANTITY OF SERUM WITH ABSOLUTE PRECISION AND GRADUALITY TO BE DISTRIBUTED INSIDE THE DOUBLE FILLERS. An optimal system, which docs not altor tho charactoristics of tho sorum graft. Equipped with remote control, ...

Flow: 0.12 l/min - 1.52 l/min

Small volume, high flow Easy to replace the pump tube Stainless steel rotor, long life Stepper motor, precise control Suitable for viscous and non-viscous liquid transfer The wall thickness of the ...

Flow: 0.001 l/min - 0.485 l/min
Pressure: 0 bar - 2 bar
Head: 2 m

... 485ml/min.(For intermittent work only) 300RPM supports continuous working mode Easy to operate, can quickly replace the pump tube; High precision, low noise, simple structure, maintenance-free Two tube clamp ...

Flow: 0.005 l/min - 0.06 l/min
Input diameter: 1, 2, 2.5, 3 mm
Output diameter: 3, 4, 4.5, 5 mm

... The pump tube adopts imported BPT (B) tube and silicone tube (S), which can be applied to different transmission liquid requirements Pump tube size is optional (04#, 06#, 08#) peristaltic pump ...

Pressure: 100,000 psi
Fluid temperature: 5 °C - 40 °C
Length: 84 in

Cutting speed increased 50% Cost savings 28% Cutting metal thickness 300mm Motor Rating:45kw/60HP Pressure Range (Deadhead):90,000psi(6200 bar) Flow Rate at Max. Pressure:0.78 gal/min Attenuator Volume:2L Length:83.7in Width:53.7in Height: ...

Flow: 7.6 l/min
Pressure: 420 MPa
Power: 100 ch

1 PUMP DRIVE 5 CUTTER HEADS INTENSIFIE PUMPS CAN OPERATE A LOW TEMPERATURES IN HIGH-TEMPERATURE ENVIRONMENTS 10 YEARS, TECHNICAL BREAKTHROUGH Motor Rating：75kW/100HP Pressure ...

Flow: 3.8 l/min
Pressure: 320 MPa - 380 MPa
Power: 50 ch

Adopt servo motor Save on costs 30% Dual intensifier, continuous operation for 24 hours Motor Rating：37kW/50HP Pressure Range (Deadhead) ：60,000psi Max. Flow Rate at Max. Pressure (60 Hz)：1.00gal/min Attenuator ...

Flow: 1,000 m³/h
Head: 120 m
Power: 250 kW

... plastic pumps Based on innovative strength and over 60 years of expertise in the use of thermoplastics, we have set a new milestone in the shape of a future-oriented, efficient and reliable pump system.It ...

Flow: 235 m³/h
Head: 68 m
Power: 30 kW

STÜBBE E-CLASS: entry-level model in the STÜBBE pump family horizontal, single-stage centrifugal chemical plastic pump with mechanical seal in monobloc design (not self-priming) efficient hydraulics ...

Flow: 130 m³/h
Head: 42 m
Power: 11 kW

Horizontal single-stage spiral cased pump Shaft sealing through single or double acting mechanical seal Circulation, rinsing, quench or barrier medium depending on application Made of sturdy plastic components, ensuring ...

Flow: 0.002 l/min - 1 l/min
Power: 20 kW
Length: 190 mm

SP 311 Peristaltic Pumps Peristaltic pumps ideal for transferring gas, liquids, mixtures and emulsions in various industries. Easy to use and Reliable • Minimum maintenance (just replace the tube) • ...

Flow: 60, 80 l/min
Pressure: 14,700 Pa
Power: 39, 58 W

Pressure type Easy restart by micro swith Two directional control valve No need of grounding Outdoor (Rainproof) use • Septic tank (biological contact aeration) • Air injection for bubble bath • Small ...

Flow: 80, 40, 60 l/min
Pressure: 12,800, 14,700 Pa
Power: 39, 58, 30 W

... control “Dust trap filter” Easy restart by micro swith (XP-60 / 80 only) No need of grounding Outdoor (Rainproof) use • Septic tank (biological contact aeration) • Air injection for bubble bath • Small ...

Flow: 18, 20 l/min
Pressure: 9,800 Pa
Power: 17 W

Pressure type Outdoor (Rainproof) use • Septic tank (biological contact aeration) • Bubble bath (air bubble injection) • Oxygen supply for fish breeding

Flow: 0.03 l/min - 1 l/min
Pressure: 0 bar - 2.5 bar
Input diameter: 0.3 mm - 6.4 mm

LabDos® peristaltic pumps are displacement pumps on which rollers force the medium which is to be fed through a hose from the outside. The fed material thus does not come into contact with metal parts ...

Flow: 40, 74, 38 l/min
Length: 250 mm
Width: 140 mm

High performance standards 100% Oil-free Ultra-High flow rate for quicker operation Excellent gas sealing / Contamination free Long reliable service life Low power consumption and noise level

Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm

The PCP 005 volumetric pumps is the state of art in the micro-dispensing world. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or ...

Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm

The PCP 015 volumetric pumps is the state of art in the micro-dispensing world. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or ...

Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm

The PCP 050 volumetric pumps is the state of art in the micro-dispensing world. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or ...

Description USB connectable plug&play syringe pump for jfermi bioreactor

Flow: 0.0007 l/h - 0.02 l/h

Peristaltic pump peristaltic, pump, jFermi, 3D, modelperistaltic, pump, jFermi, 3D, model $300.00 Additional or replacement pump (Feed/Acid/Base/Antifoam) for ...

Flow: 0 m³/s - 0.375 m³/s
Pressure: 0 bar - 8 bar
Head: 90, 130 m

... configurations, the fiberglass pumps SATURNevo have superior benefits and are ideal for seawater applications and corrosive liquids and atmospheres. Long-coupled "ZGS" or close-coupled "ZMS" Compact ...

Flow: 0 m³/h - 50 m³/h
Pressure: 8 bar
Head: 48, 65 m

ROUTE centrifugal pumps are made of high-quality thermoplastic polymers. They are available in magnetic and mechanical versions, with the same external dimensions - which is a unique feature offered by ARGAL that eases ...

Flow: 0 m³/h - 900 m³/h
Pressure: 0 Pa - 800,000 Pa
Head: 0 µm - 200,000,000 µm

... External, single, or double flushing ​ FRP accessories to empower or adapt the pump to any plant Flanges reinforced in Kevlar (more resistant) On request: chance to choose pump colour Applications Aquarium, ...

Flow: 3,200 m³/h
Pressure: 90 bar
Head: 480 m

... overhung process pump, designed and built in accordance with the latest edition of API 610 (OH2 type), and with over 130 hydraulic combinations available. Overview Designed for all fluids and process conditions, the ...

Flow: 366.5 m³/h
Pressure: 1,100 bar
Fluid temperature: -40 °C - 200 °C

... The RDP series of Reciprocating Plunger Pumps is suitable for handling most liquids for Oil & Gas, Industrial and Wastewater Treatment applications. RP's RDP pump series are a type of positive displacement ...

Flow: 100 m³/h - 20,000 m³/h
Pressure: 145 bar
Head: 10 m - 1,200 m

The ZM pump is designed for stringent demands in process and transfer services. Engineered to comply with the latest edition of API 610, these horizontal pumps with double suction impeller and a between ...

Flow: 2.2 l/min
Pressure: 220 bar
Power: 0.75, 3 kW

The Mirò injection pump designed to reach efficient interventions in the most common cold injections applications of heat-sensitive expanding resins or sealants, for restoration and consolidation. It is recommended ...

Flow: 2.2 l/min
Pressure: 220 bar
Power: 3 kW

... cooling fan, is designed to ensure that the heat from the motor is not transmitted to the pump body, in this way the heat-sensitive resins do not catalyze inside the equipment Cold injection prevents ...

Flow: 4 l/min
Pressure: 220 bar
Power: 3, 1.1 kW

... cooling fan, is designed to ensure that the heat from the motor is not transmitted to the pump body, in this way the heat-sensitive resins do not catalyze inside the equipment . Cold injection prevents ...

Flow: 0.4 l/min - 12 l/min

... battery accessory. Quick and easy disconnection of the drive from the pump station can be achieved with the clip lock, resulting in being able to use one drive for filling at numerous ...

Flow: 0.4 l/min - 12 l/min

Bürkle's EnergyOne barrel pump is run by a power supply unit fitted with a detachable clip lock and is installed with an innovative hybrid system that delivers fast, versatile and efficient ...

Flow: 56 l/min
Power: 220 W

EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • with anti-siphon device • 4 m supply hose as standard • additional hose from 6 to 10 m - ...

Flow: 40 l/min

EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • built-in protection filter • 4 m supply hose as standard • additional hose from ...

Flow: 50 l/min

EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • built-in protection filter • 4 m supply hose as standard • additional hose from 6 to 10 m ...

Flow: 1.6 l/min - 25 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m

The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors ...

Flow: 2.5 l/min - 46.5 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m

... consequently, a loss of performance. That is why the PM V103 pump has a triple heating chamber to ensure the homogeneous temperature. The system sealing is made through a food packing and the drive system ...

Flow: 0.1 l/min - 0.5 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m