- Hydraulics - Pneumatics >
- Valve >
- Piston valve >
- SAMSON
SAMSON piston valves
DN: 1 in - 2 in
Temperature: 100 °F - 1,000 °F
The Model 9000 control valve is available with ANSI raised face flanges. The flanges are socket welded to the body and flange. The flange and nipple material is the same material as the body. Flange faces have concentric ...
Pressure: 0 bar - 40 bar
Temperature: -30 °C - 230 °C
... worldwide. Modern precision manufacturing methods and the very best materials guarantee ROCKY valves to be of the highest quality and reliability. TPC valves and accessories were primarily developed ...
AIRTEC Pneumatic
DN: 0.375 in - 1 in
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 50 °C
Shut - off valves series "EZVL" are produced with connections G3/8, G1/2 and G1 and they are fit to be locked in the exhaust position by means of a standard padlock.
DN: 50 mm - 600 mm
Pressure: 40 bar
Flow rate: 16 m³/h - 5,400 m³/h
PROPORTIONAL PISTON ACTUATED VALVE DESIGNED FOR HIGH DIFFERENTIAL PRESSURES The valve maintains downstream pressure to a constant and pre-set rate of upstream value. No pilots needed. ...
Pressure: 16 bar
Temperature: 20 °C - 200 °C
Acts as a re-circulation loop Works under pressure as well as vacuum Directly representative sample Max viscosity = 2,000 cP
DN: 50 mm - 900 mm
Pressure: 16 bar - 64 bar
Temperature: -29 °C - 90 °C
... conditions and high pressure. •Piston actuation design ensures exceptional valve reliability with long term maintenance free operationand vertical serviceability. Solid piston design ensures ...
DN: 15 mm - 65 mm
Pressure: 0 bar - 10.2 bar
Temperature: 0 °C - 180 °C
... / 4-20 mA (after automatic balance) Control element 2-port/2-way valve, NC (normally closed) as standard, as option 3-port/2-way valve for mixing different media, with standard piston Electrical ...
Pressure: 0 bar - 40 bar
Temperature: 95 °C
Externally controlled valve for the hydrogen sector Valves for hydrogen and oxygen in electrolyser operation Pneumatically operated 2/2-way valve - Direct pressure control Designed ...
Pressure: 13 bar - 50 bar
Temperature: -29 °C - 204 °C
DN: 0.5 in - 6 in
Pressure: 1 bar - 13 bar
Temperature: -15 °C - 180 °C
Model RET-DS / REF-DS are the Direct Acting Pressure Reducing Valve designed with Duplex Stainless Steel material providng more options for different industries. Pressure Reducing Valve protecting the ...
Elite Line Industrial Corp.
DN: 3, 4, 6 in
Pressure: 14.2 psi - 170.6 psi
Temperature: -15 °C - 80 °C
... Grooved End Pilot Control Pressure Reducing Valve reduces pressure of inlet flow into desired outlet pressure. Pressure Reducing Valve can prevent damage within pipelines due to high pressure. Unique ...
Elite Line Industrial Corp.
Pressure regulator valve is installed on inlet side of relay pump. Pressure regulator valve supply the greatest flow rate to relay pump at the smallest pressure. Pressure regulator valve ...
Elite Line Industrial Corp.
DN: 15 mm - 50 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 180 °C
The actuator features anti water hammer that allows fluid to pass below the seat and an optical position indicator. Its body is made of stainless steel and its corrosion resistant. The rotation is possible up to 360 degrees, and it has ...
DN: 100 mm - 1,600 mm
Pressure: 2.5 bar - 40 bar
... anti cavitation and resulting in higher flow capacity in cubic meters / second compared to valves manufactured by the competition. Control valves type Plunger Di Nicola respond to major ...
DN: 5.5 mm
Pressure: 1 bar - 10 bar
Flow rate: 3,000 l/min
• Solenoid valve type NAMUR, piston reel, return by air spring, operated indirectly • End of stroke box • Electro Positioning 20mA • Pilot solenoid valve 3/2 via or 5/2 via • Optional ...
Pressure: 10 bar
Temperature: -5 °C - 70 °C
... pressure failure happen. if the stop valves are assembled in pairs on the cylinder. the stop valves make sure, that the cylinder piston rapidily stops. By operating the override device, ...
DN: 150, 300 mm
... ring on the piston and an O-ring in the body. The valve is hygienically clean thanks to targeted flushing of the piston and the secure shaft seal. Carefully positioned guide rails guarantee ...
Pressure: 0 bar - 250 bar
Flow rate: 0 l/min - 150 l/min
... pilot pressure that, acting on a small piston, resists the force of the adjustment spring. The valve can be easily modified to get any one of the four versions S: U, T, X, turning the upper and the bottom ...
Pressure: 15 bar - 300 bar
Temperature: -20 °C - 100 °C
... LUBRICANT DISPENSING SEQUENCE The initial piston dispenses lubricant to the outlets corresponding to the final piston. The final piston dispenses lubricant to the outlets corresponding ...
I.L.C. srl
The NV62L Block & Bleed Valve is most commonly used in combination with a declutchable gear override. This Namur accessory mounts in-line with other components such as a Namur solenoid valve, directly ...
DN: 38.1 mm - 101.6 mm
Pressure: 10 bar
Temperature: -10 °C - 25 °C
... need for special tools Sturdiness: valve bodies made from solid bar Balanced valve members made from solid bar Upper and lower lift control Serviceable actuator The B915PMO is ...
BARDIANI VALVOLE S.p.a.
DN: 15 mm - 200 mm
Temperature: 100 °C
... and fluids in all energy and process networks, with no need for auxiliary energy. Type 5610 The pressure-maintaining valve ensures constant primary pressure in steam, gas and fluids in all energy and process networks, ...
DN: 2 in - 16 in
... • Double Piston Effect or Single Piston Effect seat design • Mixed SPE and DPE seats design also available • Integral top-works direct mounting pad to ISO 5211 • 6” and larger valves ...
DN: 15 mm - 200 mm
Temperature: -10 °C - 400 °C
KLINGER® piston valves Piston valves stand for excellent industry performance with their minimum maintenance requirements and production savings. KLINGER piston ...
Pressure: -1 bar - 6 bar
Temperature: 0 °C - 100 °C
Non-Intrusive Plug Valve Sampler • The plug is flush with the vessel wall when retracted. • Extracts a representative sample from the side of a vessel/dryer. • Can sample under vacuum or over-pressure • Sample Plug ...
Flow rate: 55 l/min - 600 l/min
The valves for the GMV power units are packed with technology meant to last over time and offering unparalleled reliability. Hundreds of thousands of elevator systems running with our products are an unequivocal proof ...
RUPTURE VALVE TYPE B – TYPE G – TYPE R; OVERFLOW VALVES TYPE G – TYPE R IN COMPLIANCE WITH THE STANDARD 2014/33/UE The rupture valves type 3006 interrupt the downward travel of the ...
DN: 15 mm - 32 mm
Pressure: 6 bar - 10 bar
Temperature: -30 °C - 120 °C
compact piston drive medium pressure of up to 10 bar with EPDM and medium pressure of up to 6 bar with PTFE (EPDM) visual position indicator NC, NO, DA NAMUR-compliant air connections resistant to contaminated medium market ...
Pressure: 350 bar
Temperature: -18 °C - 105 °C
Connect one end to a Quick-test hose and the other to the process connection then turn the knob to control the pressure • Easily control pressure of a closed system • Fine tune pressure to a precise number • Easily attach ...
Pressure: 350 bar
Temperature: -18 °C - 54 °C
... a test bench or control panel for easy access and control • Non-rising stem vernier controls smoothly • Floating piston head makes o-ring wear very low
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining