Schmalz supports

... Aluminum die-cast Oberfläche: blank Tip: Compatible double T-slot nut/hammer screw see 096HK1045M0830 and flange nut floor mount base on request

Support system for standard applications: FP AP Glass fibre reinforced polyester, 0% halogen Brackets for wall-mounting or mounting on or suspending from rails Widths 100 to 950 mm Reinforcement ...

Monobloc support system: FP AM Glass fibre reinforced polyester, 0% halogen Widths 100, 150, 200 and 300 mm Rail centring ribs Endcap

Support system for compact footprints: FP IP Glass fibre reinforced polyester, 0% halogen Small footprint Recommended where space is small Suitable for irregular walls Optimum use for low-width cable trays Widths ...

Adjustable brackets for various suspension rods are available in a variety of sizes to fit most crossarms. These brackets fit steel tubing sizes 1 1/4″, 1 1/2″, 1 3/4″ and 2″.

The pivoting saddle allows the pointed air rods and conductors to be fixed on a non-horizontal

The kit consists of a brass mounting base with fixing screws for the air rod (for flat conductor) or a copper collar placed at the base of the air rod (for round

Hydraulic work supports are used to support the workpieces in a specific plan and prevent vibration during machining. Different versions exist : •The rod is extended at rest •The rod may be in any ...

Antenna extension Design: Antenna extension with magnetic base for better positioning of the antenna and for optimum transmission and reception power. Connection cable: 1.5 metres Connector: straight Application: The antenna ...

DonadonSDD disc holders are designed in order to ensure maximum reliability to DonadonSDD rupture discs. Disc holders designed to be mounted between flanges such as HI/A and HR/A have: an internal ...

DonadonSDD disc holders are designed in order to ensure maximum reliability to DonadonSDD rupture discs. HI/F and HR/F flanged disc holders, previous code AZ-60, have been designed to be fitted directly on the piping. ...

DonadonSDD disc holders are designed in order to ensure maximum reliability to DonadonSDD rupture discs. HI/P and HR/P pre-tightened disc holders offer the following advantages: Easy to install ...

... an adjustment of 360 °. Suitable for applications exposed to accidental impact State of supply 1 flange connector, 1 sensor holder connector and 1 aluminium cross connector; 1 M6x16 socket head screw, 3 M6x14 socket head ...

Use: machine control panel support. Possibility to run cables through the tube Kit ready for installation. State of supply 2 angle connectors, 2 aluminium swivel supports, stainless steel tubes, galvanised ...

Use:machine control panel support. Possibility to run cables through the tube. Material 2 pedestal connectors, 1 angle connector, 1 AISI 304 steel tube segment, galvanised steel nuts and bolts.

Conductor holder for flat roofs where it is not possible to drill in order to secure the conductor, such as bitumen roofs. To be filled with cement. The lip at the bottom of the cone allows it to be embedded in ...

... inspection. The IG rupture disc holder features an inclined seat and is designed for forward acting rupture discs. The 30° oblique seating arrangement creates the optimum seal for the rupture disc ensuring leak tight ...

... rupture disc holder outlet performs a support function and guarantees the optimal opening behaviour when the defined burst pressure is reached. The integrated pre-assembly bolts allow an easy and safe ...

The use of two rupture discs in combination allows the process to continue safely after one disc has been destroyed as the process is still secured by a second (closed) disc. For this reason, production processes that use toxic or corrosive ...

The RPH-1 is to be used with our standard reflection probes, which are 6.5mm in diameter. The holder enables positioning of the probe tip in two angles: 45 degrees for diffuse reflection measurements and 90 degrees (normal ...

... separate fibres for illumination and detection. All 11 holes have a diameter of 1.6mm and are equipped with a setscrew to mount the probes or fibres into position. The AFH-15 is made of black anodized aluminium.

... challenging but the AFH-Ocular makes the job easier. The ocular enables visual location of the measurement spot on your sample. The holder is used in conjunction with our miniaturized reflection probe (FCR-7UVIR100-2-1×25) ...

For installation of enclosures, PCB and other parts onto a DIN rail. Robust metallic material allows rigid mounting on DIN rails. Simple installation and removal via the pull lever. Max load : 10kg 【Materials】 Base, Lever : Plated ...

■ Plastic wall mounting bracket. Easy attachment and removal. ■ Large and small brackets are available. ■ Applicable not only for the PF series, but also other plastic/metal enclosures with a panel thickness of 0.8 ...

■ NOTE Before installation, please ensure that the lever is not fully hidden behind the enclosure ■ For installation of enclosures, PCB and other parts onto a DIN rail. ■ Simple installation and removal via the pull lever.

Machine Vision Camera-Monitor Mount 200 mm For safely holding and positioning of machine vision Cameras and Monitors

for a safe holding and positioning of sensors, lasers, lights etc.. with a magnetic base

For flexible and ergonomic positioning of Tablets Consist of Articulated Arm 4.300: 340 mm Steel Base 5.032 (Other Bases possible) Tablet Clamp

Bracket Navy series 1″11 BSP male fixing on tube vertical/horizontal inside/outside 2″ 1/2

Type: stainless steel Weight: 1,62 kg Mount on: Pipe, from 33mm to 83 mm dia Tipology : mounting Stainless Steel stand off bracket for NAVY HF series dia: 40 (2 sides pcs)

... NMO Mount with 17 Ft. RG-58A/U Cable and UHF Male (PL 259) Connectors FEATURES 3/4 Thru-Hole NMO Mount 17 Ft. RG-58A/U Cable UHF Male (PL 259) Connector Included 5 Year Factory ...

Material: PVC Colour: transparent In 6 sizes: for wires and cables of Ø 1,1 to 30 mm. 4 lengths: 3, 6, 8 and10 standard markers type 150, or 4, 8, 11 and 14 narrow markers type 200 In strips of 0,60 m for cutting to required length.

Material: PVC Colour: transparent In 6 sizes for wires and cables of Ø 1,5 to 30 mm. 4 lengths: 3, 6, 8 and 10 standard markers type 150, or 4, 8, 11 and 14 narrow markers type 200 In strips of 0,60 m for cutting to required length.

"PR" transparent carriers Three sizes: for Ø 1 to 9 mm Material: EVA halogen free (- 10 to + 65°C) Colour: clear With marker holder: For wires and cables of Ø 1 to 9. In 3 sizes: 1 of them in 2 lengths. For 6 to 7 standard markers ...

The Support one range was designed to obtain a simple and quick system to mount electronic equipment onto DIN Rails (EN 60715). Italtronic offers the modular version (M) obtaining different sizes by assembling ...

As a result of extensive market research to meet the needs of the Customer, Italtronic has developed a new range of innovative DIN rail enclosures. This range of products represents a new generation of open PCB carriers to facilitate ...

... mount. It offers a completely enclosed target for simple mounting of motion sensors. It is a 3-in-1 target/bracket/guard. The mount is suitable for all standard inductive sensors of cylindrical or DIN style. These include ...

Magnetic Mounting Device for Sensors. Magnetic connector that screws onto the Whirligig and magnetically couples it to the shaft being monitored. The Mag-Con is made from stainless steel, has a holding force of over 150 lbs. and can ...

The range of accessories for the construction of conveyor belts differentiates TRIMAT from its commercial antagonists. Flanges, heads, hubs, hard aluminum alloy tube for the production of the rollers, available in three different diameters: ...

The range of accessories for the construction of conveyor belts differentiates TRIMAT from its commercial antagonists. Flanges, heads, hubs, hard aluminum alloy tube for the production of the rollers, available in three different diameters: ...

Design frame for supporting the templates for automatic welding of a robotic station, complete with reinforcement angles and articulated adjustable feet.

These cylindrical supports provide high load capacities and fasten with a mounting screw through the bottom for low profile. Ideal for preventing the workpiece from chattering and deflecting. The positive locking mechanism ...

These mini work supports allow you to provide proper workpiece support. The spring loaded plunger retracts into the body of the support when the workpiece is put in place. The plunger ...

This extendable work support allows for easy adjustment with the hand knob. Turning the knob clockwise pushes the work support upward, counter-clockwise moves it downward. A custom spindle can be adapted ...

Application area: for application and mounting in control cabinets • Dimensions (LxWxH) approx. 122 x 51 x 5 mm • Material metal • Mounting on 35mm DIN rail • For cable diameter up to 9 mm • Cable guides 6 • Fixing of the ...