Schubert & Salzer control valves

DN: 0.25 in - 0.375 in
Pressure: 210 bar
Temperature: -30 °C - 120 °C

Proportional Valves Smooth, accurate control is a must for most pressure and flow applications, so Eaton developed an entire range of Screw-in Cartridge Proportional Valves (SiCV) to ...

DN: 300, 250 mm

These are mostly used as manual exit valves for silos with cement, gypsum, building chemicals and similar bulk solids. BV2FF model: Double flange, upper flange square, lower flange round BV1FF model: Single ...

DN: 15 mm - 600 mm

... meet ASME B16.10 long pattern. ● Gear actuator standard on 8–24"" (200–600 mm) SB-150/300 and 6 –12"" (150–300 mm) SB-600 valves. ● Memoryseal seats compensate automatically for wear and fluctuations of pressure and ...

DN: 16 mm - 156 mm
Pressure: 10 bar

1.Product Desciption: Standard: ISO, DIN, IDF, SMS Material: SUS304,SUS304L,SUS316,SUS316L Working principle: Remote-controlled operation by the driving gear Three drive forms: a.Normally closed b.normally opened c. opened ...

ARAG® Manual Proportional Spray Control Valves Adjusts flow proportionally to control spray pressure. Key Features 473 Series outlet size: 1 1/4" HB

DN: 10 mm - 200 mm
Temperature: -30 °C - 240 °C

... Electric Vacuum (Pressure) Ball Valve Description: Gud series electric vacuum (pressure) ball valve adopts rotary electric and electronic regulating valve driving device Gud series ...

Pressure: 20 bar - 200 bar

Volumetric Metering Valves AXDV-C Ultimate process reliability at lowest dosage volumes – made possible by the new ABNOX Valve. It allows accurate placing of minute quantities of your complex lubricant ...

Introduced and patented by Red Valve, the air -actuated Type A Pinch Valve offers a unique, cost-effective solution to flow control problems. More Red Valve Type A Valves ...

... the sleeve chamber, allowing the valve to open. MANUAL CONTROL All valves are equipped with a three-way manual selector valve. Manual OPEN / CLOSE control ...

DN: 4 mm - 8 mm
Pressure: 0 bar - 18 bar
Temperature: -10 °C - 80 °C

Gate valves Areas of application : compressed air Technical features - nickel plated brass body - handle made of resin - oil-proof rubber packings NBR - maximum working pressure : 18 bar - working temperature ...

DN: 15 mm - 150 mm
Pressure: 16 bar
Temperature: -40 °C - 150 °C

... volatile gas and liquid process control. 850C lined PTFE corrosion resistant control valve, the valve body and the inner part of the whole lining of fluorine structure, ...

DN: 50, 80, 100, 150, 200 mm
Pressure: 0 bar - 12 bar

HD deluge valve is a quick opening, differential diaphragm type valve. Deluge valve is used to control water flow in Deluge, Pre-Action as well as Foam systems. The valve ...

... patent-pending technology that includes high-temperature seals and adjustable valve pins, the system provides a flawless injection molding process. Speak to us today about our VeriShotᵀᴹ Single Valve ...

Pressure: 350 bar
Flow rate: 12 l/min - 60 l/min

... devices used to split flow in one direction and combine flow in the opposite direction. These valves may be used to accurately control two or more cylinders or hydraulic motors where bidirectional ...

Pressure: 300 psi
Temperature: 149 °C

... or close the valve. Applications: • Steam and Water Sampling Systems • Automatic Thermostatic Bypass • Thermostatic Flow Control • High or low Temperature Relief Valve • High ...

Pressure: 2.5 bar

... port/2-way microfluidic valve. Using standard fittings, it can be integrated into any microfluidic setup. Its unique design allows to combine multiple 2-SWITCH™ together to save space on your benchtop. *Intuitive Plug ...

DN: 20 mm - 200 mm
Pressure: 16, 40, 64 bar

Body: WCB, WCC, WC6, SS304, SS316 Bonnet: WCB, WCC, WC6, SS304, SS316 Seat: SS304, SS316, SS316L End Connection: Flanged, RF, MF, RTJ Welding: Socketweld, Buttweld Packing: PTFE, Graphite Gasket: Metal Graphite Actuation ...

DN: 12.7 mm - 203.2 mm

... Series is a two piece, full port, flanged end ball valve with an ISO 5211 compliant direct mount actuation pad. The 10E10 is available in sizes ranging from ½” to 8” with ASME Class 150 flanges. Valve ...

DN: 15 mm - 200 mm
Pressure: 5.5 bar - 76 bar
Temperature: 38 °C

... Piston Valve (PPV) is a linear movement valve in which a stainless-steel piston travels between the upper and lower seal ring. These rings are separated by a lantern bushing, which supports the piston ...

... Inline check valve/swivels are used at the inlet ports to provide backflow protection as well as freedom of movement. A wide range of peripheral items are available to enhance the operation of our valves, ...

DN: 10 mm - 80 mm
Pressure: 25 bar - 40 bar
Temperature: -10 °C - 120 °C

Full bore FPM shaft “o” ring PTFE ball seats Brass valve BSP threaded Nominal pressure: - 1/4” to 1”1/4 = 40 Bar - 1”1/2 to 4”= 25 Bar Working pressure: see pressure / temperature diagram Temperature = -10°C +120°C

DN: 15 mm - 300 mm
Pressure: 25 bar - 40 bar
Temperature: -60 °C - 200 °C

... reinforced PTFE with additional sealing made of FVMQ OPERATION Connection dimensions acc. to (EN)DIN/GOST on request DN 15-100: lever – galvanized carbon steel with polymer end DN 125-300: manual gearbox with worm gear recommended

DN: 0.125 mm

This flow control valve is provided for repeatable oil flow control in one direction. This valve prevents damages to the system caused by high flow rates. It was made ...

DN: 0.125 in - 0.25 in
Pressure: 7 psi - 135 psi
Temperature: -20 °C - 70 °C

1、Delicate and compact structure; 2、Available to exhaust and cut off flow, sensitive in adjustment, high precision; 3、Install in several positions to facilitate installation and application.

Pressure: 0 bar - 0 bar
Temperature: 250 °C - 450 °C

Bakeable leak valves are used to control the flow of gas into a vacuum system from an external source. A soft metal pad is compressed against a harder metal seat, creating the necessary seal for precise ...