Schubert & Salzer control valves

... and secondary vessels in mixing plants, wagons, reservoirs under filters and separators, cone worm mixers By means of the lever system, the flap is vertically moved down and swivelled laterally by the side of the discharge ...

DN: 0.25, 0.375, 0.5 in
Pressure: 0 bar - 300 bar
Flow rate: 12, 20, 25 l/min

The FPSB series engineered by Dicsa, is a flow-control valve, composed of a steel made body and interior. Its exterior surface features a zinc plated construction. Furthermore, this Dicsa flow control ...

Pressure: 10.3 bar
Temperature: 0 °C - 40 °C

The ISQBF series control valve is an electronic pressure regulator designed to precisely and proportionally control the pressure of gases based on an electronic signal. The ISQBF is ...

DN: 0.25 in - 4 in
Pressure: 1,000, 800, 600 psi
Temperature: -20 °F - 450 °F

... psi W.O.G; 4" 600 psi Temperature range -20° to 450°F End types threaded with Locking device Locking lever handle

Ball Valves Ball Valves with unresticted flow Ball valves or nickel-lated brass with a chomium-plated ball. Seals fo Teflon (PTFE and NBR). Metal lever (alu alloy). ...

DN: 15 mm - 900 mm
Pressure: 1,600,000 Pa - 42,000,000 Pa
Temperature: -196 °C - 380 °C

Ball Valve Body materials: carbon steel, stainless steel, alloy steel WCB, LCB, CF3, CF3M, CF8, CF8M, MONEL, and more. Valve Ball type: floating ball, trunnion mounted ball. Valve Manufacturing ...

Pressure: 500, 700 bar
Flow rate: 60 l/min

Control valves Pressure valves Flow control valves Stop valves

DN: 15 mm - 50 mm
Pressure: 40, 50 bar
Temperature: -20 °C - 160 °C

Full bore ball valve, F/F, with extended polyamide ISO-T-handle, anticondensation and dripless.

DN: 15 mm - 800 mm
Pressure: 20 bar - 420 bar
Temperature: -50 °C - 200 °C

Side Entry Valves suitable for Oil & Gas production, processing, transportation, distribution, chemical and petrochemical refining including system isolation, pressure level and flow measurement, instrument drain, ...

DN: 25 mm - 150 mm
Pressure: 0 bar - 10 bar
Temperature: 130 °C

Fast and exact control of processes in hygienic applications Standard control cone with equal percentage Sealing geometry optimised for all required process conditions Two-part valve ...

DN: 1.25 in

... unique patented concept for mechanical tapping of plastic pipes. The positioning/ securing of the saddle is easy done by a lever arm system, and a spring loaded compensaton is providing a constant sealing against the ...

DN: 0.25 in
Temperature: -20 °C - 70 °C

Dependable safety valve to retain a set supply air pressure and guarantee a steady process control when a supply air is suddenly failed by accident and its pressure becomes lower than a set pressure Features - ...

DN: 15 mm - 25 mm
Pressure: 20 bar
Temperature: -10 °C - 130 °C

... terminal balancing valve with standard test points (Fig. 9525) and optional electric actuator (Vaurien) Additional information Material - DZR Brass Typology - Static balancing Connection - ISO 228/1 DZR ...

DN: 15 mm - 125 mm

... Flanges drilled acc.to ANSI Possibility of equipment with handlever, manual gear, pneumatic or electric actuator (on request) Control equipment connection according to ISO 5211 On request, possibility of special executions ...

DN: 0.25 in - 2.5 in
Pressure: 25 bar - 63 bar
Temperature: -20 °C - 150 °C

The Siral V2000 is a brass ball valve which features its capacity to make a full flow stream in conveying general steam of water, air, vacuum oils and non-corrosive liquids. It comes with a nominal pressure of PN 25 to ...

DN: 15 mm - 100 mm
Pressure: 16 bar

Angle seat pattern globe valve Fig. VS 104 BODY - INOX CF8M 2 - DISC - INOX CF8M 3 - STEM - INOX 316 4 - GLANDPACKING - Graphite-PTFE 5 - GLAND - INOX CF8M 6 - BONNET - INOX CF8M 7 - NUT - ...

DN: 15 mm - 300 mm
Pressure: 3 bar - 16 bar
Temperature: -20 °C - 120 °C

... invented the one-piece plastic flanged ball valve in 1992 No metal fittings, PTFE seal, flange connection, wide application range Fewer leakage points, quick opening, and closing. Optional flanged ball valve ...

DN: 0.125 in - 0.5 in
Pressure: 0 bar - 255 bar
Temperature: -29 °C - 250 °C

... Minor series valves are the finest regulation version of our needle valves. They are called Minor since they are of reduced dimensions and precision regulation. Ideal for instrumentation panels and for ...

DN: 50 mm - 500 mm
Pressure: 10, 6 bar
Temperature: 180 °C

One-piece body, tight-closing, centric disc With blow-out proof shaft Design for mounting between flanges according to DIN EN 1092-1 Face-to-face length according to DIN EN 558-1-R20 Leakage rate A according to DIN EN 12266-1 For ...

DN: 15 mm - 300 mm
Pressure: 1.6, 2.5, 4 MPa
Temperature: -29 °C - 180 °C

The ball valve is mainly used to cut off or connect the medium in the pipeline, and can also be used for the regulation and control of the fluid. The hard-sealed V-shaped ball valve has ...

DN: 1 in - 36 in
Pressure: 16 bar - 250 bar
Temperature: 0 °C - 1,200 °C

The SwitchPlug valve consists of a triple or four-way valve along with an insert underneath and dual or triple outlets in T or Y versions. These valves are mostly preferred for usage ...

Pressure: 1 MPa
Temperature: 0 °C - 100 °C

... Enclosure Applications: © HVAC © Water treatment © Chemical process © Small equipment for automatic control © Replacing solenoid valve, particularly when solenoid cannot work reliably

DN: 15 mm - 50 mm
Pressure: 0 bar - 13 bar
Temperature: -10 °C - 180 °C

... Steel CF8 (Aisi 304) Pipe Size G1/2” – G3/4″ – G1″ – G1 1/4″ – G1 1/2″ – G2″ SEAL PTFE PIPE SIZE ACTUATOR G1/8″ Options 3/2 Command Pilot Visual Positioning Indicator (Standard) Electrical positioning indicator Propotional ...

Pressure: 29 bar
Flow rate: 12 ft³/min

Shut off valve for individual control Easy connection to air hose

DN: 30 mm
Pressure: 900 mbar
Flow rate: 150 l/h

... a PTFE membrane functions as a pressure equalization valve up to the opening pressure point. The bursting membrane bursts once defined interior pressure exceeds. The gases then are safety guided to ...