DN: 50 mm - 3,000 mm
Pressure: 10 bar - 100 bar
Pressure / flow control valves. Main features : ■ significant reduction in turbulence, vibration and noise ■ fine regulation of the entire range of flow, made possible by the customized trim ■ high ...
Pressure: -1 bar - 10 bar
Temperature: -20 °C - 200 °C
... materials. Lever controlled. Operation Push down lever until sample is collected. Valve spring closes. Features Spring return (Close). Lever operated or air actuated. Wafer ...
Pressure: -1 bar - 6 bar
Temperature: 0 °C - 100 °C
Non intrusive sampler with zero dead space, the piston is flush with the vessel wall. Extracts a representative sample from the bottom or side of a vessel/dryer. Can sample under vacuum or over-pressure. Sample is extracted through ...
DN: 250 mm - 3,000 mm
The dapò valves are widely used where a regulation of the flow rate or a partialization of the air flows is required. Dapò adjustment valves with diameters from 250 mm up to 3000 mm are possible. For ...
DN: 10 mm
Pressure: 0.3 bar - 10 bar
Temperature: 5 °C - 90 °C
The DN 10 float valve (angle valve) is a servo-controlled membrane valve that closes by the buoyancy of the float to regulate the level in containers. When liquid is withdrawn from ...
A. u. K. Müller
DN: 0.25 in
Pressure: 630 bar
Temperature: -20 °C - 200 °C
Cameron's DBA multistage choke is a multiple-pressure drop, anticavitation valve ideally suited for water injection. It controls the problems of cavitation, excessive noise, and vibration. To optimize ...
CAMERON
Pressure: 350 bar
Temperature: -20 °C - 50 °C
Flow rate: 320 l/min - 1,900 l/min
... pilot valve and a main stage with poppet and LVDT. With the DFplus pilot valve the TDP achieves extremely fast response times: from 10.5 ms (NG25) up to 28 ms (NG100) with an accuracy of <0.1 % of the ...
Pressure: 400 bar
Temperature: -20 °C - 90 °C
Flow rate: 250, 180, 400 l/min
The KLSV is a series of flow-sharing, load-sensing main control valves for multifunction construction machinery. Their low hysteresis and excellent pressure drop characteristics provide superior performance ...
Kawasaki Precision Machinery
DN: 0.75, 1 in
Pressure: 276 bar
Temperature: -54 °C - 177 °C
Parker's B12 Series Ball Valves are available to operate manually or pneumatically for large V and 1" tubing systems.. They provide quick on-off control of fluids utilized in process and instrumentation ...
Watts Fluid Air
DN: 0.125 in - 0.5 in
Pressure: 35 psi - 130 psi
Temperature: 0 °F - 160 °F
Soft-start valves allow pneumatic components to be pressurized slowly for safety and control. MGV series soft-start valves are available with port sizes from 1/8" NPT to 1/2" NPT and ...
DN: 4 mm - 10 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 80 °C
... Product Types: •3/2 Manual Switch-Operated Valve, Supply, Maie BSPP and Metric Thread •3/2 Manual Switch-Operated Valve, Control, Maie BSPP Thread •2/2 Manual Switch-Operated Valve, ...
DN: 25 mm - 150 mm
Pressure: 4, 10, 6 bar
Temperature: -10 °C - 140 °C
... investment costs and optimized valve operation Space-saving inline mounting that easily connects to the piping system High process hygiene due to the use of the same components as the EHEDG-certified LKB valve Count ...
Alfa Laval
DN: 50, 65, 80, 100 mm
Pressure: 27.6 bar
Temperature: -50 °C - 105 °C
... a pilot operated, dual-position valve. This valve is equipped with a manual opening stem and A2D pressure pilot. The CK-6D is a normally open valve during refrigeration, with both pilot ...
DN: 32, 40, 50 mm
Pressure: 16 bar
Temperature: -10 °C - 180 °C
... aggressive applications • Valves meeting Pressure Equipment Directive 97/23/EC • Mountable in any position • Tight shut-off and Long Service Life • Parker Angle Seat Valves conform to the terms of ...
Parker Fluid and climate Controls Europe
DN: 15 mm - 250 mm
Pressure: 23.8 bar - 40 bar
Temperature: -10 °C - 400 °C
... on request), manual handwheel control, flanged connections according to EN1092-1 PN 40 with prominence. Streamlined flow valves, Streamlined flow valves bellows type, Streamlined flow ...
Mival
Pressure: 95, 90, 85 psi
Flow rate: 7 ft³/min - 15 ft³/min
ACV Air Control Valve The Clemco air control valve (ACV) allows the blast operator to control the volume of air to the Clemco high-pressure Type CE, ...
DN: 15 mm - 200 mm
Pressure: 25, 16, 40 bar
Temperature: -10 °C - 450 °C
Service-friendly control valve to DIN/EN with flanged ends, either with linear or equal-percentage control characteristic at Kvs values of 0.1 to 630 m³/h and closing pressures of up ...
DN: 3.35, 4 in
Pressure: 0 bar - 517.1 bar
Temperature: 0 °F - 250 °F
Rotary Systems’ timing valve is designed for applications that require automatic clamping and unclamping. This timing valve eliminates the need for a control valve or ...
DN: 0.25 in - 1.5 in
Pressure: 0 bar - 690 bar
Temperature: -40 °C - 74 °C
30 Series shut-off valves are high pressure, high flow applications up to 10000 psig / 690 bar and offer Cv = 0.28-20.0. The 30 Series offer globe and angle pattern bidirectional flow, soft seat and built-in metallic ...
Emerson Automation Solutions - TESCOM
Pressure: 0 bar - 8 bar
Flow rate: 350, 1,600 l/min
... self-heating) Control from 0 bar (vacuum version available) High pressure control stability The piezo-controlled proportional valves of the Tecno series are 3-way pressure valves ...
HOERBIGER Automatisierungstechnik GmbH
DN: 0.25 in - 1.375 in
Pressure: 450, 700 psi
... discharge bypass regulating valves have a brass body. The smaller capacity direct acting valves are available with SAE or ODF connections. The larger capacity pilot operated valves have ...
DN: 0.75 in - 1 in
Pressure: 103, 10.3 bar
Temperature: -40 °C - 82 °C
... high-pressure shut-off valves serve to provide overpressure protection by containment. Type 634 shut-off valve with internal registration is installed between a pressure reducing regulator ...
FISHER REGULATORS
Pressure: 3.5, 1.5 bar
Temperature: -20 °C - 100 °C
• Made of stainless steel with large free cross section and sealed gate blade • For installation between two flanges in gravity pipes at up to 1.5 barg (FUS) and 3.5 barg (FUH) • Low construction height - Application Suitable ...
DN: 2, 3, 1 in
Pressure: 15,000 psi
... premium quality plug valves offering for a wide range of well drilling production&well-servicing applications. Available the range in size1”ro 3”&pressure rating upto 15000psi. Other valve products, such ...
Haimo Technologies Group Corp.
DN: 0 mm - 1,200 mm
Pressure: 0 bar - 830 bar
Temperature: -196 °C - 570 °C
Control valve manufacturing started in 1960 under the brand of Nuovo Pignone and since then, its technology has been continuously improved. With over 160.000 valves installed worldwide, ...
Please specify:
Help us improve:
remaining