DN: 50 mm - 1,200 mm
Pressure: 6, 16, 25 bar
The EX model knife gate is a uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries ...
ORBINOX
DN: 25 mm - 100 mm
Pressure: 50 bar
Temperature: -196 °C - 120 °C
The Type 09340 is a cryogenic gate valve with a stainless steel body and topwork. It has a one way tightening in its flow of direction. The unit can be cleaned and degreased for oxygen service. Moreover, ...
HEROSE
DN: 2 in - 3 in
Pressure: 250 psi
... Ductile Iron 250 psig AWWA Resilient Wedge Gate Valve is designed for use in drinking water, sewage and fire protection systems as well as irrigation and backflow control systems. The Series 2500 Resilient ...
American Flow Control
Pressure: 2,500 Pa
Temperature: 0 °C - 90 °C
GATE VALVES Size:1/2‘’-4‘’ [Technical Specification] Material Normal Brass; CW617N;DZR Working Pressure PN25 Application Water Working Temperature 0℃-90℃
Zhejiang Italy Copper Company
The electropneumatic slide gates mod. SE are used for the automated installations with remote driving system. Since abovementioned data are approximated and could change, please contact the factory before the purchase. ...
DN: 150 mm - 300 mm
... application with more than 53 innovative claims; making the Mucon Slide Gate Valve one of the most advanced valves of its type on the market today. Construction Stainless steel slide ...
Mucon
DN: 0.5 in - 4 in
s. 112 NPT Flow: Full Connections: FxF Application: Plumbing Stem Configuration: Packing Gland Body: Brass Product: Gate Valve Sizes: 1/2" - 2"
DN: 150 mm - 400 mm
General purpose of a slide valve is to adjust or fully stop the flow of bulk solid material inside silos, hoppers and similar closed volumes. OZB slide valves are available with square, rectangular and ...
Pressure: 75 psi - 150 psi
Temperature: -12 °C - 227 °C
The Mark 87 piloted temperature regulator is the sliding gate valve engineered to provide wide rangeability and greater accuracy for a variety of temperature control applications. Utilizing the same technology ...
JORDAN VALVE
DN: 65 mm - 250 mm
● Long cycle life bellows (3000 cycles) in Gr. 321 (stainless) or Inconel. Designed and successfully tested in high pressure/temperature conditions. ● Two-part bellows. ● Two secondary stem seals: a) Backseat in open position; b) Graphite ...
VELAN
... Electric Ultra-High Vacuum Gate Valve Applicable range (Pa) - 105～1.3×10-7 Gas leakage rate (Pa.L/S) - ≤1.3×10-7 ≤1.3×10-7 Valve”s roasting temperature（℃） - ≤150(Except the drive ...
Shanghai EVP Vacuum Technology Co., LTD
DN: 3 in - 36 in
Red Valve's Series DX Slurry Knife Gate Valve is recognized as the most durable and user friendly knife gate valve designed for difficult slurry applications. When ...
Red Valve
DN: 40 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 85 °C
The valves in series 20.900/21.900 are soft seated gate valves, made of ductile iron, manufactured in accordance with severe product norms and relevant norms, and in conformity to EN ...
Brandoni
DN: 40 mm - 300 mm
Pressure: 10 bar
Temperature: 150 °C
Execution: metal seat inside stem (non-rising) non-rising handwheel Materials: body and bonnet: GJL-250 body- and wedge seats: 1.4307 stem: 1.4006 Flange connection: / Face-to-face: DIN EN 1092-2 Form B Face-to-face DIN ...
DN: 100, 200, 250 mm
Pressure: 0 mbar
Category - Gate valve, manual, ISO, stainless steel Actuation - manual via hand crank Item description - Long life, bellow sealed gate valve for high vacuum (HV) mounting ...
VACOM
As a manufacturer and exporter of industrial control valves, KOSA has a full range of industrial control valve solutions and continues to provide the most competitive control valve products ...
SuZhou KoSa Environmental Protection CO.,LTD
DN: 50 mm - 500 mm
Pressure: 0.1 bar - 1.5 bar
Temperature: -25 °C - 80 °C
The disc valve is used for dust tight and (as an option) pressure tight locking of a hopper with bulk solids, or as a locking valve in pipelines for gases. • Dust-proof, pressure-tight, vacuum-tight ...
DN: 2 in - 12 in
Pressure: 14, 24, 16, 21 bar
... and FM Approved •Valves can be easily fitted with OS&Y Tamper switch HD ductile iron Gate Valves are available as OS&Y Type with rising stem and as NRS type with non-rising stem. ...
DN: 15 mm - 800 mm
Pressure: 1.6 MPa - 25 MPa
... is good ◎It can be used on ring network pipeline whose medium flows towards two directions ◎Structure length is short Valve material TA1,TA2,TA10,Gr C-2,Gr C-3,Zr702C,Zr705C,N6,N200,CZ-100,M35-1,N06600,CY40,N12MV,CW12MW,CN7M,4A,6A,HK30,etc. Performance ...
... technology that includes high-temperature seals and adjustable valve pins, the system provides a flawless injection molding process. Speak to us today about our VeriShotᵀᴹ Single Valve Gate ...
DN: 50 mm - 1,200 mm
Pressure: 1.6 MPa - 160 MPa
Temperature: -46 °C - 600 °C
GB Gâte Valve is suitable for the nominal pressure (CL150-CL2500),, chemical, thermal power plant and other conditions of the pipeline, eut off or connect the pipeline medium. Main material: carbon ...
DN: 15 mm - 300 mm
Pressure: 125 psi - 900 psi
... manufacturing, exporting and supplying of Bolted Bonnet Gate Valve in India. This Gate Valve is highly preferred in the market and considered as the best alternative ...
Marck And Care Engineers Ltd.
DN: 15 mm - 50 mm
Pressure: 16 bar - 800 bar
Temperature: -80 °C - 80 °C
Cryogenic Gate Valve Body: SS304,SS316L Bonnet: 06Cr19NI10 Stem: 06Cr19NI10 Packing: PTFE Disc face ring :PTFE Applicable medium: O2, N2, Ar, LNG
Valvesonly Europe
DN: 15 mm - 300 mm
Pennant gate valves conform to API 600 / API 602 / API 603 and are provided with smooth machined full bores. Full opening of the wedge eliminates additional pressure drop across the valve. ...
DN: 50 mm - 700 mm
Neles™ knife gate valves are ideal for all industrial shut-off applications for example in pulp & paper and water & wastewater industries. Features Neles knife gate valves ...
Please specify:
Help us improve:
remaining