- Hydraulics - Pneumatics >
- Valve >
- Gate valve >
- Schubert & Salzer
Schubert & Salzer gate valves
DN: 32 mm - 125 mm
Pressure: 0.7 bar - 16 bar
Temperature: -20 °C - 80 °C
... inside the SAE mounting face the shut-off valve simply remains mounted to the closing end after releasing of the pipe or the flexible pipe connector. The inner calibre of the shut-off valve is increased ...
DN: 6 mm
Pressure: 700 bar
Temperature: -20 °C - 60 °C
Our manual valve is designed for reliable use with single or double acting hydraulic systems. If desired, it is available with a lock function for secure load holding. Technical data Mounting face Cetop C DIN ...
DN: 1.5 in - 56 in
Pressure: 0.3 psi - 8 psi
Temperature: -15 °C - 80 °C
... Pressure Sustaining Valve is an automatic, pilot controlled valve that activated by the pressure of the pipeline. The valve will maintain a steady, predetermined pressure at the upstream ...
Elite Line Industrial Corp.
DN: 2.5 in - 12 in
Pressure: 200, 300 psi
Temperature: 0 °C - 80 °C
... UL Listed NRS Gate Valve - The stems of this Gate Valve are of the non-rising system version. This means that in contrast with its rising system counterpart, the valve ...
Elite Line Industrial Corp.
DN: 2 in - 12 in
Pressure: 300, 200 psi
Temperature: 0 °C - 80 °C
... Listed OS&Y Gate Valve ,commonly used to control water flow to fire sprinkler systems is known as outside stem and yoke or outside screw and yoke. OS&Y Gate Valve operate ...
Elite Line Industrial Corp.
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... at the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established ...
Di Nicola Infinam Srl
DN: 50 mm - 1,600 mm
Pressure: 25, 40, 16 bar
... when they use the double disk floating valve, the oscillations of pressure haven’t any effect on the opening degree of the valve, that closes at the maximum level of regulation. For standard applications, ...
Di Nicola Infinam Srl
DN: 50 mm - 2,000 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
Di Nicola manufacture gate valves in malleable iron , ductile iron and high nickel alloys for extreme corrosion for over fifty years with sizes from 40 to 1600 mm and nominal pressure 2.5 bar till 25 ...
Di Nicola Infinam Srl
DN: 0.5 in - 3 in
The internal thread gate valve, also known as the gate valve, is the most widely used valve and belongs to the mandatory sealing valve. medium flow.
ChinaTanggong Valve Co., Ltd.
Pressure: 303 bar
Temperature: 121 °C
... sampling components from high temperature liquids. It is an economical and reliable mechanical replacement for a solenoid shutoff valve and temperature controller, requiring no external source of electricity, air or hydraulics. The ...
DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C
Cast iron (GJL 250) PN 10 gate valve flat body inside screw stainless steel (AISI 304) trim 150°C (max) Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length ...
Maran e Peracini srl
DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: 120 °C
Cast iron (GJL 250) PN 16 foot valve Viton gaskets. Made in Italy. Fields of application: Fuel - Diesel - Lubricating.
Maran e Peracini srl
DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 150 °C
Cast iron (GJL 250) PN 16 gate valve oval body OS&Y stainless steel (AISI 304) trim 150°C (max). Made in Italy. Fields of application: Industrial plants - Sewage Water - Water treatment - Air-conditioning ...
Maran e Peracini srl
DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 60 °C
Dueker gate valves – for water and gas.Reliable, safe and cost-effective. Dueker gate valves are used to great effect all over the world. There is a good reason for ...
Düker GmbH
DN: 50 mm - 1,200 mm
Pressure: 3 bar - 10 bar
Temperature: -30 °C - 200 °C
• Available in sizes ranging from DN50 to DN600 with either Wafer or Lug body configurations. • Ideally suited to be used in lines containing fibrous particles and liquids with suspended solids. • Main Application Areas are Pulp&Paper ...
Doruk Endustri Ltd.
DN: 63 mm - 225 mm
Pressure: 1, 4 bar
Temperature: -10 °C - 70 °C
SINGLE-PLATE GATE VALVE TYPE PSA-ELI SIL-PE Being part of the proven KÜHME shut-off valves for gas supply lines, the gate valve type PSA-ELI SIL-PE ...
Kühme Armaturen GmbH
DN: 63 mm - 225 mm
Pressure: 1, 4 bar
Temperature: -10 °C - 70 °C
SINGLE-PLATE GATE VALVE TYPE PSA-ELI BLO-PE Being part of the proven KÜHME shut-off valves for gas supply pipelines, the gate valve type PSA-ELI BLO-PE ...
Kühme Armaturen GmbH
DN: 40 mm - 300 mm
Pressure: 6, 16 bar
Temperature: -10 °C - 70 °C
SINGLE-PLATE GATE VALVE TYPE PSA-ELI SIL / ELITA Being part of the proven KÜHME shut-off valves for gas supply lines, the gate valve type PSA-ELI SIL ...
Kühme Armaturen GmbH
DN: 10 mm - 50 mm
Pressure: 16 bar
The fast-closing float anti-explosion valve prevents propagation of flame and pressure during explosion to other production equipment. This valve is intended for protection of pipe transport systems.
DN: 50 mm - 1,200 mm
Pressure: 10, 6, 5, 4, 2 bar
The Knife Gate Valve is a uni-directional wafer valve for general industrial application.It is predominantly used in the paper and pulp chemical industries mining industries ...
DN: 50 mm - 600 mm
Pressure: 10, 4, 6, 5 bar
... The nominal widths available for the knife gate valves range from DN50 to DN600 with flange connections complying with EN 1092 PN10 or alternatively, ANSI B16.5 (class 150). Actuators of Knife Gate ...
DN: 50 mm - 600 mm
Pressure: 1 bar - 10 bar
The type C Knife Gate Valve for bulk material is a unidirectional wafer valve which was designed especially for bulk material technology (powder or granulated materials). The Knife Gate ...
DN: 6 in - 84 in
For High Pressure Differential Applications Description The M&J Valve Model M-303 is an advanced design slab gate valve for high pressure differential applications in the oil & gas ...
Celeros
DN: 2 in - 36 in
M&J Valve Expanding Gate (EG) valves can be used in wide range of critical applications, from pipelines to power plants, in ESD and other demanding isolation applications. Description The ...
Celeros
DN: 3 in - 48 in
The M&J Valve's Compact Expanding Gate Valve is a full opening non-thru-conduit mechanically sealing valve that achieves superior sealing by utilization of a two-piece ...
Celeros
DN: 0.75 in - 3 in
Flow rate: 0 l/min - 300 l/min
... Bronze valves with seat connections. Packing & Gasket: Asbestos-Free B&G Flo-Control Valves are used for preventing gravity flow in forced water systems and to permit summer-winter operation of ...
Gate valves Gate valves are primarily used to enable or prevent a fluid medium to flow (i.e. ON / OFF control). A fully open gate valve ...
KLINGER
DN: 50 mm - 600 mm
Pressure: 4 bar - 10 bar
Temperature: -40 °C - 130 °C
Body material Cast iron Gate material Stainless steel 304 PN (End) PN10 End Between flange Contact sealing Nitril Operating system Handwheel rising stem
TECOFI
DN: 2 in - 12 in
... interchangeable brass metering ports and drain ports on both sides of the valve, two check valves with gasketed caps, bronze valve stem and plug disc, multi-turn adjustment handwheel, ...
Watts Water Technologies
DN: 50 mm - 1,000 mm
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 90 °C
The Flange threaded ball valve is designed to replace the conventional multiple-valves connections. It has a lifting and twisting body with non rising hand wheel. This valve has ...
SFERACO
DN: 89 mm - 300 mm
Pressure: 300 psi
Temperature: -10 °C - 160 °C
1.Design Standard: AWWA C515 2.Nominal Pressure: 300PSI 3.Flange Standard: ASME/ANSI B16.1 Class 125 or ASME/ANSI B16.42 Class 150 or BS EN1092-2 PN16 or GB/9113.1 4.Epoxy resin coating both inside & outside the body 5.It could ...
Nuevas líneas de extincion
DN: 2 in - 12 in
Pressure: 16 bar
Temperature: 0 °C - 80 °C
Z85X Valve is a manually operated,Non rising stem resilient wedge gatevalve designed for use in fire protectionsystems for on/off operation only. Thelightweight ductile iron body allows for bothvertical and horizontal ...
Nuevas líneas de extincion
DN: 50 mm - 300 mm
Pressure: 300 psi
1.Design Standard: AWWA C515 2.Nominal Pressure: 300PSI 3.Flange Standard: ASME/ANSI B16.1 Class 125 or ASME/ANSI B16.42 Class 150 or BS EN1092-2PN16 or GB/T9113.1 4.Epoxy resin coating both inside & outside the body
Nuevas líneas de extincion
They are simple water intake valves that transmit water to the land in agricultural pressurized irrigation systems. The user can irrigate by connecting the irrigation pipe directly to the outlets of the receiver valve. ...
STURDY MACHINE
When water is supplied to the pump outlets and pipelines, air accumulations in the system, especially in the pump outlets, narrow the water passage area and cause a decrease in capacity. Double sphere suction cups are used to avoid this ...
STURDY MACHINE
Valves with a shut-off arrangement in the form of a curtain by means of a slide and connected to pipelines to stop the fluid in the pipe. Thanks to the screw shaft mounted inside the body, the valve is ...
STURDY MACHINE
DN: 2 in - 84 in
The M&J Valve Model M-303 is an advanced design slab gate valve for high pressure differential applications in the oil & gas sector. It is designed to simplify installation and upgrades, ...
DN: 2 in - 36 in
... Recovery Mainline Block Valves Tank and Station Valves Block & Bleed Valves Manifold Valves Launcher/Receiver Trap Valves ...
The M&J Expanding Gate Valve is a round body cast steel valve with a thru conduit in the open position and is normally manufactured in class 600 & higher. The M&J Compact Expanding Gate ...
DN: 40 mm - 500 mm
Pressure: 10 bar - 25 bar
Temperature: -50 °C - 200 °C
shut-off gate valve – rotating non-rising stem – non-rising handwheel – flexible wedge – complies with the requirements of the directive 2014/68/EU and standard EN 1984 – testing is carried out ...
DN: 40 mm - 800 mm
Pressure: 10 bar - 100 bar
Temperature: -105 °C - 540 °C
shut-off gate valve – non-rotating rising stem – non-rising handwheel – flexible or plate wedge – complies with the requirements of the directive 2014/68/EU and standard EN 1984 – testing is carried ...
DN: 50 mm - 350 mm
Pressure: 160 bar - 630 bar
Temperature: -10 °C - 600 °C
shut-off gate valve – non-rotating rising stem – non-rising handwheel – self-sealing bonnet – flexible wedge – sealing surface is welded by hard facing Stellite 6 – complies with the requirements ...
DN: 15 mm - 50 mm
Pressure: 16 bar
Temperature: 0 °C - 200 °C
gunmetal housing, brass bonnet female pipe thread Standards and Approvals DIN 3352 Technical Data pressure rating PN 16 max. operating temperature 200 °C
DN: 40 mm - 1,200 mm
Pressure: 40, 10, 16, 25 bar
STANDARDS OF MANUFACTURE Metal seat gate valves EN 1171 (ISO 1083) DUCTILE IRON GATE VALVES EN 1074-2 ISOLATING VALVES EN 558 (ISO 5752) FACE TO ...
ACMO S.p.A.
DN: 50 mm - 400 mm
Pressure: 1 bar
Temperature: 80 °C
... Orifice Gate™ as the industry standard. It was the first valve specifically designed for handling dry bulk solid materials, and is “the original” orifice gate valve. Purpose: ...
Vortex Global
DN: 100 mm - 350 mm
Pressure: 5 bar
Temperature: 120 °C
The HDPV2 Gate was originally developed to isolate silos in applications where high pressure aeration is used to fluidize powder discharge. Over time, the HDPV2 Gate has been redesigned and modified for ...
Vortex Global
DN: 50 mm - 305 mm
Temperature: 350 °C
... Pressure Valve™ often replaces deficient slide gates and butterfly valves used in such environments. Key Features Replaceable packing gland for in-line maintenance Spring-loaded ...
Vortex Global
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining