SKF stationary pumps

Flow: 0.01 l/min
Pressure: 38 bar

... The ECP is designed to lubricate bearings and linear guides with oil or fluid grease. The pump works reliably in single-line systems of up to 20 lubrication points and a main line length of approximately 15 meters. It includes an integrated ...

Flow: 0.1, 0.2, 0.5 l/min
Pressure: 30 bar

... MKx gear pump units include a pressure-regulating valve and pressure-relief valve. Electrical pressure monitoring is performed by an integrated pressure switch, and fill-level monitoring also is possible. These units are controlled externally ...

Flow: 8, 14, 24 l/min
Pressure: 0 bar - 400 bar
Head: 120 m

... The ZPU 08/14/24 pumps are used primarily in dual-line systems or as supply pumps and have a maximum operating pressure of 400 bar (5800 psi). Depending on the system layout, these electric pumps can ...

Flow: 0.00008 l/min - 0.0042 l/min
Pressure: 0 bar - 350 bar

... The high-pressure, multi-line pump can supply lubricant directly to lubrication points or can be used as a centralized lubrication pump in large-sized progressive systems. It can drive up to five elements, which are available ...

Pressure: 0 bar - 240 bar

... consists of a pumping unit and a lid set. EPUMP-XXX-ECO coding is referring to ECO lid sets (descending pump head with follower plate), which are suitable for greases in NLGI grades 1 and 2. EPUMPXXX-STA coding is referring ...

Flow: 0.8, 1.6, 3.2 l/min
Pressure: 400 bar

... operated piston pump for dual-line or progressive systems The ZPU 01/02 high-pressure, high-volume pumps can be used as a supply pump for small to midsize dual-line systems or for ...

Flow: 0.015 l/min - 0.45 l/min
Power: 180 W - 370 W
Fluid temperature: 10 °C - 40 °C

... lubricity for the pump to lubricate itself. Some of these distribution pumps require an attached, single-circuit priming pump that operates separately. The priming pump restricts differential ...

Flow: 0.85 l/min - 50 l/min
Pressure: 20 bar - 50 bar
Head: 1,000 mm

... positive-displacement pumps with fixed displacement and high efficiency. They are suitable for a variety of applications, such as hydraulic, hydrostatic, cooling as well as oil circulation and total-loss lubrication systems. ...

Pressure: 205 bar

... ordered separately. Up to 18 lubrication points can be supplied via an SSV metering device with fixed output amount and can be monitored directly from the pump. The unit’s integrated, all-in-one system concept reduces ...

Pressure: 80 bar

... The QLS 311 pump is a monitored lubrication system with low-level control for a maximum of 18 lubrication points. Designed for use with standard high-pressure plastic tubing, the QLS family includes pumps with or without ...