- Hydraulics - Pneumatics >
- Filter and Separator >
- Hydraulic filter >
- STAUFF
STAUFF hydraulic filters
Flow: 600 m³/h
Omsat's FRD filter is a vacuum filter with flat endless not waste filtering belt, which stops during the suction time. Filtration is obtained by creating a mud cake. Hydraulic ...
Operating pressure: 30 bar
The Strainer PN 20 manufactured by Ludemann is a Y-type unit equipped with a stainless steel screen and a drain plug made of brass MS 58. It is engineered with screwed ends that comply with DIN 259 standards. This strainer is capable ...
Metal mine rotary vacuum disc filter characteristics of the device : long service life;self-cleaning;better sealability;main drive by CVT;higher efficiency;lower noise;lower energy consumption.Optimization of the design ...
lianyungang boyun machinery.com
Operating pressure: 25 bar
Filtration size: 10 µm - 5,000 µm
The duplex BOLLFILTER Duplex Type 2.04.5 consists of two chambers. Whilst one half is in operation, the other is cleaned in reserve. When the tolerance limit for soiling is reached, it switches without a pressure surge to the cleaned half.
... PURAIN Rainwater filter, also known as the hydraulic jump filter, is the innovation for roof areas ranging from 60m² to more than 15.000m². This hydraulic jump technology ...
INTEWA GmbH
floor mount bench mount mild steel stainless steel liners 4, 13, 24, 41 L capacities
Operating pressure: 350 bar
Filtration size: 20, 10 µm
Compact in line high pressure filters prevent chips and debris that have entered the hydraulic fluid system from damaging hydraulic system components.
Operating pressure: 250 bar
Flow: 40, 100 l/min
Pressure filters protect downstream hydraulic components against soiling. They are installed in the high-pressure line typically after the pump. The pressure filter type PFM contains ...
Filtration size: 40 µm - 170 µm
Flow: 2.5 us gal/min - 12.9 us gal/min
Fluid temperature: 80 °F
Insert style safety screens feature an integral locking end that uses our field-proven insert principle of controlled expansion during installation to lock and retain the screen in place. A pre-installed expander pin is simply pressed ...
THE LEE COMPANY
Operating pressure: 0 MPa - 24 MPa
Filtration size: 40 µm - 300 µm
Flow: 0.1 l/min - 100 l/min
Cartridge-style safety screens are designed to slip into a drilled flat-bottom hole and be retained by a secondary means. The Lee Company offers a separate retainer for the 5.5 mm and 8.0 mm sizes. These screens are constructed of all ...
THE LEE COMPANY
Filtration size: 4 µm - 170 µm
Flow: 1 l/min - 92.364 l/min
Fluid temperature: 80 °F
Press-in style safety screens are specifically designed for easy installation into plastic housings and fittings and use our unique barbed design that provides easy press-in installation while ensuring retention. These components are ...
THE LEE COMPANY
Filtration size: 900 µm
... quick clea-ning action without removing the filter's parts. Furthermore. the pressure outlets positioned upstream and dow-nstream of the filter allow to understand when DIAFIL filter ...
Operating pressure: 350 bar
Filtration size: 10 µm - 100 µm
Flow: 100 l/min
... efficiency High filtering performance and resistance With anti-extrusion to overcome even the highest pressure peaks Interchangeable filter parts Replaceable or washable filter cartridge ...
BELL S.R.L.
Operating pressure: 350 bar
Filtration size: 10 µm - 100 µm
Flow: 100 l/min
... retain particles, even the finest thanks to a filtering degree from 80/100µm to 10µm. 90° high pressure hydraulic filters – 350 Series: main features The 350 Series 90 ° high pressure ...
BELL S.R.L.
Operating pressure: 500 bar
Filtration size: 10 µm - 80 µm
Flow: 100 l/min
Hydraulic In-line filters with bk-ring for filtering at high pressures – 500 Series: main features Connected to the delivery or discharge line of the hydraulic system, ...
BELL S.R.L.
Operating pressure: 15 bar - 350 bar
Filtration size: 10 µm - 25 µm
In-Line-Filters 10+25 Micron, G1/4 G3/8 G1/2 - Independent of the flow direction useable - Very good filtering - Pipe mounting - Filter-insert exchangeable - Low weight because ...
Operating pressure: 42,000,000 Pa
Filtration size: 0 µm
Flow: 26 l/min
HPM is the high pressure filter up to 42.000.000 Pa (420 bar-6000 Psi); the range is composed by 3 different sizes with nominal flow rates up to 400 l/min., available with threaded or flanged connections. Filter ...
Operating pressure: 16 bar
Fluid temperature: -30 °C - 230 °C
•General industry application. •Body and bottom plug in investment casting. Specifications •Nominal diameter: DN-15 to DN-200. •Screen: Stainless Steel AISI-316.
Operating pressure: 56 bar
Fluid temperature: -10 °C - 230 °C
•General industry application. •Body and bottom plug in investment casting. Specifications •Nominal diameter: 1 /4* to 2*. •Screen: Stainless Steel AISI-316, •Ends: BSPP Thread acc. to DIN 259.
Operating pressure: 6, 10 bar
Filtration size: 40 µm - 60 µm
Flow: 0 l/min - 50 l/min
... caused by machine hydraulic oil contamination are shortened considerably. Wouldn't you like to use your machines more efficiently? For detailed information, you can contact us. Return Filters Return-Suction ...
Operating pressure: 320 bar
Filtration size: 25 µm - 80 µm
SKU:561 004 010 000 Dimension: [mm]20 x 57 Design type:Sieving filter Operating pressure: [bar]320 Materials:All parts are made of non-corrosive materials Medium:Emulsion with a min. 1,5-2% oil or concentrate
Operating pressure: 145, 200 psi
Flow: 180, 264.9, 568, 1,363 l/min
Hydraulic Filters Salient features • High dirt holding capacity • Lower pressure drop • Water removal elements • Several Mountings and porting options • Indicator shows when no element installed • ...
... materials of high loads of glass fiber. HASCO compatible system. FILTER HMP-BMF Filter, ideal to prevent the entry of impurities inthe fuel injection systems with hot camera. FILTERING ...
Operating pressure: 0 bar - 12 bar
Filtration size: 10 µm
Flow: 53 l/min
... for easy filter element replacement. Suction filters FS10 are designed for installation in the suction pipelines of pumps, outside the hydraulic tank. This makes it easy to change ...
Filtration size: 10, 25 µm
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining