Suco VSE France industrial pumps

Power: 17.6 kW
Length: 1,130 mm
Width: 740 mm

... rate, high-quality seals and an automatic low-oil shut-off system. All of our ENDRESS motorised pumps are self-feeding suction pumps based on the centrifugal pump principle and are driven ...

Flow: 1.2 l/h - 35 l/h
Pressure: 0 bar - 10 bar
Power: 33, 20 W

... pressure strokes. Solenoid diaphragm pumps consists of the follwowing (main) components: Drive housing with solenoid Elektronics with connection on the control panel Built-in pump ...

Flow: 0.5 l/min - 12 l/min
Pressure: 20 bar
Power: 1.8 kW

The m-tec speedy-MP is an easy-to-handle pump for processing soft materials or pumpable products such as structured or decorative renders with a granularity of up to 2 mm. It is mainly used to pump creative ...

Flow: 3 l/min - 22 l/min
Pressure: 30 bar
Power: 4 kW

The m-tec P20 is a compact pump for processing soft materials or pumpable products with a granularity of up to 4 mm. The P20 is mainly used to pump basic, decorative, synthetic resin ...

Flow: 3 l/min - 24 l/min
Pressure: 30 bar
Power: 4 kW

... m-tec m-tec pump is the perfect entry-level model for the automation and automation and 3D printing sector. Advantages Easy adaptation to different materials due to infinitely variable power control Problem-free ...

The archimedean screw pump is suitable for the lifting of water and sludge in civil or industrial wastewater treatment plants. The main characteristics of its operation are the big flow ...

Flow: 15 m³/h - 18 m³/h

... varies depending on the type of auger pump installed. The 7515 up to a maximum grain size of 8 mm conveys up to 15m3/h. With the 2L8 auger pump (up to 12 mm grain size) speeds of up to 18m3/h can be reached.The ...

• Flow rates and prevalence on request • Made of PP or PVDF

• Flow rates and prevalence on request • Made of PP or PVDF • Filter chambers with discs, cartridges, wires, bags

• For applications inside or outside the tank • Made of plastic: PP – PVC • Shaft made of: AISI316 – coated titanium

Flow: 42 l/min - 129 l/min
Pressure: 500, 400, 320 bar
Power: 0 kW - 75 kW

HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s

Flow: 201, 167, 266, 221, 278 l/min
Pressure: 160, 210 bar
Power: 0 kW - 75 kW

HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s

Flow: 103 l/min - 163 l/min
Pressure: 365, 575, 465 bar
Power: 0 kW - 110 kW

HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s

Flow: 0 m³/h - 560 m³/h
Pressure: 0 bar - 12 bar

Thanks to the vertical construction form, the WANGEN KL-T / KB-T has only a small space requirement. The consistent diameter of the joint connections ensures constant flow speeds and reduces the sensitivity to foreign ...

Flow: 0 m³/h - 100 m³/h
Pressure: 0 bar - 80 bar

... pharmaceutical and cosmetics industry. Low-impact delivery of products containing solids. CIP and SIP cleaning is possible, the pump is available as a mobile or stationary unit. Benefits and Characteristics ...

Flow: 0.01 m³/h - 4.6 m³/h
Pressure: 0 bar - 48 bar

The WANGEN progressing cavity pump type KB-SL Hygienic is a further development of the pump construction series for the food industry. In this area, where there is contact with the product, the stainless ...

Flow: 10 m³/h - 30 m³/h
Pressure: 12 bar
Power: 5.5 kW - 11 kW

The “Dragon ME” series represents the evolution of the Dragon piston pumps series with the addition of the membrane unit in case of pumping highly abrasive liquids. Flow ranges: from 20 to 30 mc / h - in single mode ...

Flow: 10 m³/h - 60 m³/h
Pressure: 12 bar
Power: 5.5 kW - 11 kW

... under control. Flexibility of use and structural strength. In order to achieve these results the pumps had to be equipped with a proportional hydraulic pump, capable of constant power adjustment and ...

Flow: 0 m³/h - 450 m³/h
Head: 0 m - 100 m
Power: 4, 3 kW

Standardized centrifugal pumps type NB are single-stage horizontally mounted pumps. They are characterized by a maintenance-friendly design and can be used in a wide variety of applications. 18 sizes ...

Flow: 0 m³/h - 42 m³/h
Head: 0 m - 42 m
Power: 4, 3 kW

Multistage high pressure centrifugal pumps type ZHB are horizontally mounted pumps. They are characterized by a minimum space requirement. Optionally, this series can be equipped with two or three pressure ...

Flow: 0 m³/h - 120 m³/h
Head: 0 m - 58 m
Power: 4, 3 kW

... centrifugal pumps of the series SM are single-stage horizontally mounted pumps. Because of their robust and durable design the SM pumps can be used in a wide variety of applications. ...

Flow: 249.88 m³/h - 931.21 m³/h
Pressure: 175 psi

Clear Liquid Pumps Cornell’s clear liquid pumps are known around the world as the most durable, most reliable, highest efficiency pumps in the industry. They can be found in a variety ...

Flow: 4.54 m³/h - 36.3 m³/h
Head: 80'00", 130'00"

Edge End Gun Booster Pumps 2C-Corrections-ClippedCornell’s EDGE™ End Gun Booster pump for Center Irrigation Pivots are designed as a retrofit for pivot systems. The competitively-priced 3HP and 5HP End ...

Flow: 68.1 m³/h - 823.3 m³/h
Pressure: 175 psi

Cyclone Vertical Turbine Pumps Cornell Pump’s VT pump series (Cyclone) relies on our demonstrated superior hydraulics, in a submerged design. The proven quality of Cornell RB series ...

The external gear pump with innovative hygiene concept Dead space free and maintenance free. The rinsing concept ensures maximum hygiene and optimized cleaning cycles. The selected materials guarantee a long service ...

Pressure: 700 bar

• Easy to carry – Made of aluminum. • Ergonomic – Easy grip pump lever and relief knob. • High Speed – The pumps have 2-step function that automatically switches between high speed and high pressure. • ...

Pressure: 1,000, 1,500, 2,800 bar

... tensioner. • Oil reservoir in aluminum and valve made in steel (AHP705 and UHP2800). • Ergonomic – Easy grip pump lever and relief knob. • The pumps have a 2-step function that automatically switches ...

Pressure: 700 bar

AIR OPERATED HYDRAULIC PUMPS, 700 BAR • Can be operated by hand or foot. • When operating with foot you get both hands free to hold the tool, (nut splitter, puller, cylinder etc) which is a great advantage ...

Flow: 0.239, 0.025 m³/h
Weight: 50 lb

... for those looking for higher performance from a portable pump. High fluid output makes this pump the perfect option for jobs that require fast cycle times. • These lightweight and portable pumps ...

Flow: 1.66 l/s
Power: 1.1 kW

FEATURES High pressure Magnetic pumps can be used with chemically aggressive liquids Best resistance to working conditions Significant improvement in safety and durability Robust structure. Continuous efficiency Hermetic, ...

Flow: 0.53 l/s
Power: 90 W

... Applications: Chemicals Pharmaceuticals Electroplating Power applications Metal industry Mining Water Treatment Laboratories Pollution Control Food industry Graphic arts Aquariums Minilabs ...

Flow: 0.2 l/min
Pressure: 500 bar

... cintrolor with thermal couple 4-3 Pressure control=Pressure gauge/Pressure Transducer 4-4 CO2 flow comtrol：flow meter / display the gas CO2 flow rate

... also used in the transfer of recycled powder enamel with a recycling system. Please contact us for Strong3000 enamel transfer pump spare parts.

Cast iron pump pushes 500 litres per minute, debris up to 3mm, and a total head of 50m. Maximum output capacity (L/min) - 500 Inlet/outlet diameter thread type (mm/inches) - 50/2-PF Total head (m) - 50 Suction head ...

Flow: 1.3 l/min - 450 l/min
Pressure: 35 bar - 120 bar

... Description PH pumps are robust, reliable piston grouting pumps, offering the possibility of computer piloting. PH pump range is very large and allows covering the complete grouting ...

Flow: 0 l/min - 15 l/min
Pressure: 35 psi - 60,000 psi
Power: 37 kW

... waterjet life. APW A16 intensifier pump is a miracle and it realizes the dream of every waterjet users whoever used, maintained or researched waterjet. APW waterjet integrated SIEMENS motor, imports REXROTH hydraulic ...

Flow: 0 l/min - 15.1 l/min
Pressure: 35 psi - 60,000 psi
Power: 37 kW

... alternately, which makes the machine can run 24h*7d. It is because if one of these two intensifiers broken down, the machine can use the other intensifiers quickly without any wasting time on waiting ...