- Hydraulics - Pneumatics >
- Valve >
- Brass valve >
- TESCOM
TESCOM brass valves
DN: 12 mm
Pressure: 0 bar - 40 bar
Temperature: 1 °C - 60 °C
Unblockable motorised ball valve drain The TEC-44 is a powerful timer controlled motorised ball valve, designed to remove condensate from deliquescent dryers, tanks, vessels and refrigerated dryers. The ...
DN: 0.5 in - 2 in
Pressure: 10 bar
Temperature: 50 °C
ndustrial float valve with die casted body in brass or bronze. Guided sutter with rubber seal (elastomeric type). Full port pass and progressive closure. Suitable for water tank level control and other ...
Metalurgica Zaes S.L.
DN: 0.5 in - 3 in
Pressure: 10 bar
Temperature: 50 °C
Industrial float valve with die casted body in brass or bronze. Guided shutter with rubber seal (elastomeric type). Progressive closure. Suitable for water tank level control and other liquids. Level ...
Metalurgica Zaes S.L.
DN: 0.5 in - 4 in
Pressure: 10 bar
Temperature: 50 °C
Industrial float valve with die casted body in brass or bronze. Guided shutter with rubber seal (elastomeric type). Progressive closure. Suitable for water tank level control and other liquids. Level ...
Metalurgica Zaes S.L.
DN: 0.25 in - 0.5 in
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 80 °C
... material: Brass, St.St Function2 Way, 3 Way NO Ports size1/4", 3/8", 1/2" BSP & NPT Pressure rangeSee table Kv (l/min)See table Temperature rangeFluid : 5ºC to 50ºC (no freezing) Ambient : -10ºC to 50ºC Materials ...
DN: 0.25 in - 1 in
Pressure: 0 bar - 10 bar
Temperature: -5 °C - 60 °C
... material: Brass, St.St Function2 Way NC Ports size1/4", 3/8", 1/2", 3/4", 1" BSP & NPT Pressure rangeSee table Temperature rangeFluid : -5ºC to 50ºC (no freezing) Ambient : -10ºC to 50ºC Materials in contact with ...
DN: 0.25, 0.5 in
Pressure: 0 bar - 10 bar
Temperature: -5 °C - 60 °C
... •Body material: Brass, St.St Function2 Way NC, NO Ports size1/4", 1/2" BSP & NPT Pressure rangeSee table Temperature rangeFluid : 5ºC to 60ºC (no freezing) Ambient : -10ºC to 50ºC Materials in contact with mediaMain ...
DN: 2, 1.5, 1.25, 1 in
BEULCO gate valves enable safe shut-off of parts of the pipeline network or a system. The slides are designed so that spindle overruns and spindle breaks are not possible. The gate valve is equipped ...
DN: 10 mm
Pressure: 0.2 bar - 10 bar
Temperature: 5 °C - 60 °C
... industrial applications, containers are usually kept at a constant filling level by using float valves. Valves of this design are 2-chamber globe valves and have an additional back ...
DN: 15 mm - 50 mm
Pressure: 16 bar - 25 bar
Temperature: -10 °C - 200 °C
Special features • - Consisting of single-seated globe valve and actuator Accessories • - Type 2 NI Strainer Options • - Version for steam
SAMSON
Pressure: 125 psi
Temperature: -20 °F - 160 °F
Flow rate: 16 ft³/min
“300” Series Cartridge Valves are ideal for manifold systems and applications where space is limited. These 3-way normally closed valves are made from brass and electroless nickel plated ...
DN: 4 mm - 10 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 80 °C
... Product Types: •3/2 Manual Switch-Operated Valve, Supply, Maie BSPP and Metric Thread •3/2 Manual Switch-Operated Valve, Control, Maie BSPP Thread •2/2 Manual Switch-Operated Valve, ...
DN: 8 in - 16 in
Pressure: 450 psi
Temperature: 121, 111 °C
... S)ORIT evaporator regulating valves have a brass body and extended copper connections. They are available with a range of adjustable settings and pressure tap. The primary function of these valves, ...
DN: 40 mm - 300 mm
Pressure: 10, 8 bar
Temperature: -10 °C - 150 °C
... and handwheel. Brass stem and seats. Connection flanges dressed and drilled according to EN 1092-2 PN 10 with raised face. Honzontal or vertical installation. Max working temperature with standard gaskets +80° C. Gate ...
Mival
DN: 0.75, 0.625 in
Pressure: 34.5, 31 bar
Temperature: -28, -18, -8 °C
... pressure. The Parer LAC pressure control valves have a brass body with copper connections. These valves are nonadjustable. They perform the function of limiting flow of refrigerant ...
DN: 0.125 in - 0.75 in
Pressure: 414, 1,035, 690 bar
Temperature: -40 °C - 121 °C
... Remaining Parts -316 Stainless Steel, Brass Flow CapacityVA Series -Valve: Cv = 0.75 -VG Series Valve: CV = 2.0 Weight (approximate) -VA Series Valve: ...
Emerson Automation Solutions - TESCOM
DN: 0.5 in - 2.125 in
Pressure: 680, 700 psi
Temperature: -40 °F - 240 °F
Parker-Sporlan’s CDS valves are stepper motor actuated electric valves intended for use in direct expansion refrigeration and air conditioning applications. CDS valves are suited for ...
Parker Sporlan Division
DN: 40 mm - 150 mm
Pressure: 16 bar
... fluctuating demand. The BERMAD 1000 is at the leading edge of control valve design, providing a valve that is free of the typical limitations associated with standard control valves. ...
DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 140 °C
... vertical to horizontal (in relation to shaft) Materials Case : brass (DIN EN 12165, CW617N) Valve ball : stainless steel (EN 10088-2) Valve shaft : stainless steel (EN 10088-2) Valve ...
GRUNER
DN: 0.5 in - 2 in
Pressure: 28 bar
The NIBCO® brass ball valve with threaded end connections provides bubble-tight shutoff at 400 PSI. The valve's PTFE seat ring and hard chrome-plated brass ball exhibit ...
NIBCO
DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 50 °C
Resilient-seated gate valve with boltless cover connection and face-to-face length of Basic Series 15. Proven design with innovative improvements, such as plastic sliding caps on the wedge, guarantee low operating torques ...
VAG-Group
DN: 20 mm - 150 mm
Pressure: 6 bar
Temperature: 2 °C - 110 °C
... : 3-way valves with nominal diameters DN 20...150 MH42F: 4-way valves with nominal diameters DN 32...50 Can be combined with the AR30 and ASM 105, 115, 124 motorised actuators Manual adjustment by ...
Fr. Sauter AG
DN: 46, 50, 236, 336 mm
Pressure: 4 bar - 7 bar
Transfer door for load lock chambers. For applications under atmospheric pressure. Actuator Actuator cover kit to cover the pistons and cylinders of the gate pressure bar Door Other sealing materials, e.g. FFKM, VMQ, FVMO gate seal O-ring ...
Temperature: -40 °C - 275 °C
Roda Deaco Model RB3A is a compact butterfly design air intake shutoff valve available with electric or mechanical actuation. Actuation of the Model RB3A closes the valve’s sealing element which shuts ...
DN: 0.25 in - 4 in
Pressure: 125 psi
Threaded, 2-Piece, Full Port, Brass Ball Valve, 600 CWP, Sizes: 1/4" to 4" (DN 8 to DN 100), Approvals: CSA, FM, UL, NSF 61. This model has been discontinued and replaced by the 77F / 77FLF Series.
Conbraco Industries
DN: 25 mm - 300 mm
Pressure: 15 MPa
Temperature: -20 °C - 60 °C
... cutting model, high accuracy and long life ◆Valve plate and stem is above the runner in opening condition, no bear flow and no accumulate debris, long life ◆More higher pressure, better closing when the valve ...
DN: 60 mm
... male thread 2.5" NST-NH. Metal-seated valves will not guarentee total waterproofness. Maximum working pressure: PN16 Valve type: gated valve Operation: by flywheel Material: aluminium ...
DN: 20 mm - 100 mm
Pressure: 10, 16 bar
Temperature: 0 °C - 80 °C
Product OverView Exhaust valves are usually applied on the pipelines of independent heating System,central heating supply syestem,heating boiler, central air-conditioning.floor heating and air heating System. Because ...
DN: 20, 15 mm
Pressure: 16 bar
Temperature: -20 °C - 90 °C
Built-in valve, F/F threaded, with stop cock, with protection cover.
BONOMI GMBH
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining