DN: 0.25 in - 2.5 in
Pressure: 25 bar - 63 bar
Temperature: -20 °C - 150 °C
... The Siral V2000 is a brass ball valve which features its capacity to make a full flow stream in conveying general steam of water, air, vacuum oils and non-corrosive liquids. It comes with a nominal pressure of PN 25 to ...
SIRAL
DN: 0.25 in - 4 in
Pressure: 0 bar - 255 bar
Temperature: -269 °C - 230 °C
... Benefits Redfluid needle valves are designed to offer high performance. The closing by mobile obturation makes both the opening and the closing of the valve smooth, avoiding the seizure of the sealing seat. 100% ...
Redfluid SL
Push-fit Hep2O includes unique features that enable quick and easy installation with a secure fitting. It is the only push-fit plumbing system with joint recognition, secure demounting and a 50 year guarantee.
DN: 0.75 in
Pressure: 0 bar - 100 bar
Temperature: 0 °C - 100 °C
... needle valve 3/4" inch block execution made of brass for liquid and gaseous media pressure up to max. 100 bar design: - block execution product feature: - For precise control of the media . Ideal for control a flow ...
NieRuf Gmbh
DN: 8 mm - 100 mm
Pressure: 16, 25, 30, 64 bar
Temperature: -20 °C - 130 °C
... Reduced bore ball valve, F/F threaded, with pressed steel handle. ...
Rubinetterie Bresciane
... Strainer (10K. 20K) 1) Sizes: 1/2 - 20" 2) Rating: 150LB~600LB, 10K~20K 3) Material: Stainless Steel, Carbon Steel, Brass, Cast Iron 4) Connect ending: Flange, Screw, Weld 5) Applicable medium: Water, Oil, Gas 6)Structure: Y-type ...
DN: 0.125 in - 0.31 in
... extruded brass (CLA 360) and forged brass (CLA 377) wth NPTF thread of 1/8" and 1/4". -Ideal for compressed-air, oil, water and vaccum systems. Allows ideal flow control according to system requirements. -Handle made ...
SBU - Sociedade Brasileira de Usinagens Ltda.
DN: 0.25 in - 2.5 in
Pressure: 400,000 Pa - 1,600,000 Pa
... glycol. Brass valves are lighter weighted than stainless steel valves but have better corrosion resistance. While because brass valves are more expensive while the material ...
DN: 0.5 in - 2 in
Pressure: 0 bar - 7 bar
Temperature: -10 °C - 80 °C
... Description 2/3-way valve Impulse without differential pressure Body Stainless Steel, Red brass ...
GSR Ventiltechnik GmbH & Co. KG
DN: 50 mm - 600 mm
Pressure: 0 bar - 8 bar
Temperature: -20 °C - 100 °C
... makes casual contact with the seat during valve opening and closing. When the valve disc reaches the fully closed position, the seat expands against it using pneumatic pressure, providing a tight seal. On valve ...
DN: 0.25, 0.125 in
Pressure: 1,000,000 Pa
Temperature: 0 °C - 120 °C
... offers simple-type, precision-type and various other needle valves, and also manufactures flow controllers having a combination of a needle valve and diaphragm as well as proportional solenoid valves ...
DN: 0.75, 1, 0.5 in
... Brass ball valve Lever of aluminium Brass full-bore ball valve, 1⁄4” drain valve and extra 1⁄4” connection for pressure gauge. Aluminium lever. Brass ...
DN: 0.375 in - 2 in
Pressure: 1,300,000 Pa
Temperature: -15 °C - 50 °C
... The T32-B2-B is a reliable valve brand from China. It is suitable for use in water treatment plants, water meters, water heaters and HVACs. It has an NPT/BSP 1 1/4 brass valve and a voltage rating of ...
DN: 7.5 mm
Pressure: 0 bar - 27.6 bar
Temperature: 0 °C - 82 °C
... Singer Valve's 852-B Needle Valve Speed Control has a brass body and a stainless steel stem with a high quality fine thread for flow control. Its O ring packing ensures a leak proof and trouble free service. ...
Singervalve
... screwed parts, with screwed top. OPERATION Rotation of the handlewheel. CONNECTION Female thread Vs - 2 PRESSURE RANGE AC1010xx( Brass) : PN 100 AC4010xx(carbon steel) : PN 120 / PN 400 AC3010xx(stainless steel): PN 120 / PN 400 TEMPERATURE ...
END-Armaturen GmbH & Co. KG
... Product categories of Brass Ball Valves, we are specialized manufacturers from China, brass flanged ball valve, brass solder ball valve suppliers/factory, ...
Ningbo Yinzhou Plumbing Hardware Co., Ltd.
DN: 0.25 in - 0.5 in
Pressure: 6, 16 bar
... manometer gauge cock, light design, female thread x female thread, material: brass ...
Armaturen Arndt
DN: 0.25 in - 2 in
Pressure: 63, 40, 25 bar
Temperature: -20 °C - 150 °C
... ends acc. to EN 10226-1 full bore RK-Ball-o-top - Brass Ball Valves Brass ball valves with many advantages. This low priced ball valve is the ideal economical ...
KLINGER-SCHÖNEBERG GmbH
DN: 10 mm - 50 mm
Pressure: 25 bar
Temperature: -20 °C - 150 °C
... development and manufacturing brass ball valves have lead to this new series. The valves can be used for generell heating circuits, as well as for many other applications, according to the pressure temperature ...
DN: 0.375 in - 2 in
Pressure: 16 bar
Temperature: -10 °C - 160 °C
... applications of non-toxic, non-inflammable fluids, gases and vapors. It is made of bronze and the screwed topwork is made of brass. The product comes with an opening indicator. The working temperature of the product ranges from -10°C ...
HEROSE
DN: 0.25 in - 2 in
... Flow Full ConnectionsFxF ApplicationPneumatic Stem configurationTwo O-Ring HandleLockable Handle BodyBrass ProductBall Valve Size 1/4" - 2" ...
DN: 0.5 in - 2 in
Pressure: max 13.0 bar
Temperature: -30 °C - 80 °C
... We only produce compressed air piping system network, and this product is one of the components. The maximum working pressure at -20 ℃ to 70 ℃ (-30 ℃ to 80 ℃), 13bar. Vacuum: 0.13bar absolute pressure. Seamless Extruded Aluminum tube (GB/T4337.1-2000). The ...
DN: 15 mm - 50 mm
Pressure: 0 bar - 20 bar
Temperature: -20 °C - 120 °C
... The valves in the series EKOFLUX SVO balance the flow in main circuits or single sections of heating or conditioning plants. They allow correcting irregularities in the supply of the single users (irregularities which might cause noise ...
Brandoni
Pressure: 0 bar - 10 bar
... Quick exaust valve series -working pressure: 0-10 BAR -body in nickel plated brass ...
SENGA
DN: 2, 1.5, 1.25, 1 in
Pressure: 300 psi
... • Test and drain valves are compact 3-position ball valves with drain orifice having k-factor 5.6 or 4.2 (optional) • 3-positions consist of OFF, TEST and DRAIN • Brass construction (ASTM B584) • Integral ...
DN: 50 mm - 600 mm
Pressure: 16 bar - 40 bar
... Cast Iron Gate Valve 1. Body: Cast iron 2. Disc: Cast Iron 3. Stem: Stainless Steel 4. Bonnet Gasket: EPDM 5. Bonnet: Cast Iron 6. Sealing Ring: EPDM 7. O Ring: EPDM 8. Stem Nut: Brass, Bronze 9. ...
DN: 10 mm - 80 mm
Pressure: 25 bar - 40 bar
Temperature: -10 °C - 120 °C
... Full bore FPM shaft “o” ring PTFE ball seats Brass valve BSP threaded Nominal pressure: - 1/4” to 1”1/4 = 40 Bar - 1”1/2 to 4”= 25 Bar Working pressure: see pressure / temperature diagram Temperature = -10°C ...
VALPES
DN: 0.25 in - 4 in
Pressure: 40, 25 bar
Temperature: -10 °C - 80 °C
... Brass ball valve with stainless steel handle. Full bore. 3/4” - 1½” male/female - Full bore 1/4” - 2” female/female - Full bore 2 1/2” - 4” female/female - Reduced bore ...
Pressure: 68.9 bar
Temperature: 29 °C - 149 °C
... Forged Steel Shut-Off valve is to provide an isolation or connection point in liquid and gas applications where brass valves are not compatible or do not meet the pressure requirements. Applications Henry ...
DN: 0.25, 0.125, 0.43, 0.56 in
Pressure: 10,000, 6,000 psi
... Compact size valve built for maximum durability and robust performance in the toughest applications 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability Hard seat valves have ...
NOSHOK
Pressure: 125 psi
... Nickel plated brass micro needle valves offer adjustable flow in a small package. MNV-10-32MM 10-32 Male UNF x 10-32 Male UNF Max Pressure 125 psi Orifice Size Flow Coefficient: Cv: Cracking Pressure Currently ...
Valve Check, Inc
DN: 8 mm - 47 mm
Pressure: 25, 40 bar
Temperature: -20 °C - 120 °C
... DESCRIPTION • 2-way ball valve BSP female threated • Body and Ball Brass MS58 chromium plated • Seats PTFE • O-rings Viton® • Lever aluminium epoxy coated • Working pressure maximum 40 Barg up to 95° C., 25 Barg ...
Vapo Techniek B.V.
DN: 6 mm - 80 mm
Pressure: 40 bar - 80 bar
Temperature: -20 °C - 130 °C
... according to UNI ISO 228/1. Operation devices: Aluminium lever, aluminium T-handle. Available colours: black. All the valves comply with the regulation 97/23/CE and are tested 100% on pneumatic seal with electronic control. ...
EFFEBI
DN: 2, 1.5, 1.25, 1 in
... BEULCO gate valves enable safe shut-off of parts of the pipeline network or a system. The slides are designed so that spindle overruns and spindle breaks are not possible. The gate valve is equipped with connectors on ...
... The Model 472A Spray Valve is an air-open/spring-closed spray valve available in brass or stainless steel. The valve features metering adjustment of output volume and a choice of air-cap ...
DN: 0.5 in - 2 in
... Stainless steel or plated brass trim Two-way or three-way Combine with actuators for on/off, floating, or proportional control If actuator is supplied, it is not mounted, allowing access to sweat end connection Valve ...
DN: 0.125 in
Pressure: 34 bar
Temperature: -35 °F - 300 °F
... industrial brass ball valves are designed to provide years of service at an economical price. Manufactured for commercial and general industrial applications these valves offer increased performance over ...
DN: 9.525 mm
Pressure: 10 bar
... SOLENOID VALVE FOR AIR, TYPE 3/2, 3/8", 10 BAR Solenoid valve for compressed air. Brass and NBR. 1/2" (F). 24 V DC. Normally closed type. 10 bar. ...
DN: 6.35 mm
Pressure: 10 bar
... SOLENOID VALVE FOR COMPRESSED AIR, PUMP CONTROL. NO, 1/4", 10 BAR Solenoid valve for compressed air. Brass and NBR. 1/4" (F). 24 V DC. Normally open type N.O. 10 bar. ...
Pressure: 100, 63 bar
... The ideal and reliable high-flow CO2 pressure reducing valve for use with CO2 gas or liquide. ...
DN: 15 mm - 50 mm
Pressure: 16 bar - 16 bar
Temperature: -10 °C - 100 °C
... Materials and construction
- Valve body: DZR corrosion-resistant brass (EN12165-CW617N-DW)
- Flow sensor: PEEK body with HC276 electrodes
- Valve unit: modulating 2-way ball
the best suppliers