PVC valves

Pressure: 16 bar
DN: 10 mm - 80 mm

Modular design: Easy switch between different configurations due to special features and fitting devices Silicon-free Buttress thread for perfect fit of the union nut Integrated bracket for fix point mounting ...

Pressure: 16 bar
DN: 10 mm - 50 mm

L- or T-ball 15-30 V AC (12-48 V DC) or 100-240 V AC (100-350 V DC) Optical position indication Manual hand override 7 adjustable limit switches Electronic torque limitation Travel time 12 sec Duty cycle 50% IP 66 protected Anti-condensation-system

Pressure: 10 bar
DN: 65 mm - 200 mm

Installation without additional adaptor or screws Manual override Protection class IP65 resp. IP67 Position indication Torque and force limiters Travel time 6–50 sec

Temperature: -20 °C - 120 °C
Pressure: 10 bar
DN: 15 mm - 65 mm

... and 4 diaphragm and bonnet sizes for 7 different valve sizes • Non-rising handwheel that stays at the same height during rotation, equipped with a graduated optical indicator protected by a transparent PVC ...

Temperature: -40 °C - 140 °C
Pressure: 16 bar
DN: 10 mm - 50 mm

FIP has developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs ...

Temperature: -40 °C - 140 °C
Pressure: 16 bar
DN: 65 mm - 100 mm

... developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs required ...

Temperature: 90 °C
Pressure: 6 bar - 10 bar
DN: 50 mm - 300 mm

... Acting Actuators On Request : Limit switch box, positioner, namur solenoid valve, manuel override Size : DN50 … DN300 Supply Air : 4-6 bar, Stroke adjustment Valve Body Materials : PPRC Temperature ...

Temperature: 0 °C - 60 °C
Pressure: 16 bar
DN: 20 mm - 90 mm

This device is a three piece, full-bore valve that is suitable for water distribution particularly in swimming pools. It contains a PP handle, double EPDM o ring. It has recorded an Ap maxi that can hold up to 3 bars. ...

Temperature: 0 °C - 60 °C
Pressure: 16 bar
DN: 20 mm - 63 mm

The 3-piece valve uses a double FMP O-ring on stem with a full bore (Ref. 599) for use on all common fluids. It can be operated using a PP hangle, in respect to the indicated flow direction. The valve ...

Temperature: 0 °C - 60 °C
Pressure: 10, 16 bar
DN: 0.5 in - 2 in

... temperature Ts range from +0 °C to + 60°C. The maximum pressure PN is at 16 bars for valve with glued ends Ref. 598 and has 16 bars up DN 11/2,10 bars over for valve with threaded ends Ref. 599.

Temperature: -20 °C - 100 °C
Pressure: 16 bar
DN: 10 mm - 100 mm

The GEMÜ 717 2/2 or 3/2-way plastic ball valve has an ergonomically designed hand lever and is manually operated. The seat is made of PTFE. - High flow rates - Low weight - Nominal sizes: DN 10 to 100 - Operating ...

Temperature: -20 °C - 100 °C
Pressure: 10 bar
DN: 10 mm - 40 mm

... N086, N186 and N786 pressure retaining valves are used to provide a constant back pressure in process plant. If the inlet pressure rises above a preset value, the diaphragm is raised against the spring force. The valve ...

Pressure: 16, 10 bar
DN: 10 mm - 50 mm

Suitable for working with corrosive chemical fluids • Special gaskets FKM, PTFE seat • Materials PVC-U, PP and PVDF • PN16 / 10 • Diameters from DN10 to DN50 • Gluing, soldering connections, DIN / ANSI flanges, BSP ...

Pressure: 10, 16 bar
DN: 15 mm - 100 mm

BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive ...

DN: 15 mm - 50 mm

... in the ball • Diameters from DN15 to DN50 • PVC-U, PP-GF • FPM / PTFE seals • Glue or solder connections DN15 to DN50 • Possibility of pneumatic actuator DA, NC or electric motor 230V / 24V Ball valve ...

Temperature: 0 °F - 170 °F
DN: 2.5 in

Materials and Properties Loc-Line?: Vacuum Hose and Fittings Colors: Blue, Orange Material: Acetal Copolymer PVC Adapter: PVC Compatibility: Yes: Acids under 150F, Alcohols, Aromatic Solvents, Gasoline, ...

Pressure: 10, 16 bar
DN: 16 mm - 110 mm

... ball valves in PVC-U, featuring the “Antiblock” system which prevents ball jamming. Valves are 100% hydro tested prior to leaving the factory, and their reliability is further guaranteed ...

Pressure: 16 bar
DN: 16 mm - 110 mm

Cepex offers a complete range of ball valves in PVC-U and PVC-C (both manual and automatic), featuring the “Antiblock” system which prevents ball jamming. Valves are ...

Pressure: 16 bar
DN: 16 mm - 110 mm

Cepex offers a complete range of ball valves in PVC-U and PVC-C (both manual and automatic), featuring the “Antiblock” system which prevents ball jamming. Valves are ...

Temperature: 0 °C - 60 °C
Pressure: 10 bar - 16 bar
DN: 10 mm - 100 mm

The OMAL 2-way full-bore PVC valve can come in full-bore threaded or bonded ends. It can operate in temperatures ranging from 0 to 60 °and is highly suitable for flowing chemicals and all kinds of fluid ...

DN: 3 in - 8 in

... 57 LIS butterfly valve is well suited for a wide variety of fluid flow applications. The Type-57 LIS butterfly valve conforms to ISO 5752 Short Pattern face to face dimensions. This allows the Type-57 ...

Pressure: 30 psi - 125 psi

Walchem’s economical Tri-Purpose Valves are three valves in one. Installed in one direction, the spring loaded PTFE faced diaphragm provides 30 psi of back pressure and anti-syphon protection. Installed ...

Pressure: 16 bar
DN: 10 mm - 100 mm

Pressure: 16 bar
DN: 12 mm - 102 mm

2 WAY THREADED PVC BALL VALVE WITH DOUBLE ACTING PNEUMATIC ACTUATOR 2 way full bore PVC ball valve - PN16- Body, ball and stem in PVC - PTFE seats - ...

Temperature: 70 °F
Pressure: 150 psi
DN: 0.375 in - 2 in

... and all wire leads protrude from a 1/2″ NPT conduit port. The valves are a one-piece, compact design, non-union type. O-rings are EPDM, seats are PTFE with EPDM backing cushions. PVC conforms to ...

Pressure: 30 psi
DN: 0.25 in - 1.5 in

... selected for our iPolymer CR Valve line are specifically suited for use with ultrapure water, deionized water, solvents, chemicals and liquid flowing biomatter. Our PTFE Bellows-style valve stem and PTFE ...

DN: 15 mm - 100 mm

Model No.: CH100-Socket, CH200-Thread, CH300-Flanged Specifications: Body Material:UPVC,PP,CPVC,PVDF Seat:TEFLON(PTFE) O-Ring:EPDM,VITON(FPM) Size: DN15(1/2")~DN100(4") Standard: JIS,ANSI,DIN Order ...

Flow rate: 500 us gal/min

... maintaining a liquid filled line, ScrubSeal acts as a check valve to allow drainage of scrubber sump liquid through the overflow valve while maintaining required vessel vacuum during normal non-flow conditions. As ...

DN: 10 mm - 50 mm

high quality industrial valve flexible construction kit with a broadly conceived range of variants reliable material combination for safe handling of critical media new conceived ergonomic handle with ...

DN: 0.5 in - 2 in

Features: 3 Way PVC Ball Valves Click here to download the Multi Port Flow Pattern PDF Automated PVC Ball Valves PVC Ball Valves ...

DN: 0.5 in - 2 in

Material_Color: PVC/White Paddle: N/A Actuator: Manual

Temperature: 70 °F
Pressure: 150 psi
DN: 0.5 in - 2 in

The QIC2 Series features compact ball valves designed for applications in various industries. These valves are built in a compact and lightweight construction, with PTFE seats and EPDM O-ring seals. The ...

DN: 0.5 in - 4 in

Temperature: 0 °C - 60 °C
Pressure: 10 bar
DN: 40 mm - 200 mm

EPDM gasket (FPM on request) PVC body PVC butterfly NP10 mounting between flanges Nominal pressure = 10 Bar Working pressure: see pressure / temperature diagram Temperature = 0°C +60°C*

Temperature: 0 °C - 60 °C
Pressure: 10 bar - 16 bar

Electric Actuated PVC Ball Valve with Mounting Kit Economy Pattern Type J3-3010H Electric Actuated GF546 Ball Valve with JJ EasyFit-G™ Mounting Kit Our Type J3-3010G Electric ...

DN: 4, 6, 8, 10, 12 in
Flow rate: 606, 1,362, 2,274, 3,408, 5,298 l/min

... controlling a spill can be equally catastrophic. The AFL Oil Stop Valve (OSV) is designed to economically solve these problems by confining even large oil spills to the premises. Oil Stop Valves can be ...