Plastic valves

DN: 0.125, 0.25 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 60 °C

... technopolymer. BASIC valves can be assembled with accessories of other families of valves, in particular with 22 mm coils, a 8 mm hole and related connectors, modular bases and the multi-position connectors ...

DN: 13 mm - 65 mm
Pressure: 0 bar - 30 bar
Temperature: -10 °C - 200 °C

... The angle seat valves VZXA are externally actuated valves which are controlled by a direct supply of compressed air and are used to shut off gaseous or liquid media in pipe systems. In the process, ...

DN: 15 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 80 °C

Externally controlled diaphragm valve with piston actuator and diaphragm seal. As standard, actuator from PA. The flow optimised and zero dead space valve body makes high flow rates possible. Flow ...

DN: 0.25 in - 2 in
Pressure: 2,000 psi

Handle Gland - Vinyl Plastic - Handle - SUS304 - C.S. Plated Stem - SUS316 - C.S. Plated Handle - SUS304 - Gland - SUS316 - C.S. Plated Packing - Glass Filled PTFE - Thrust Washer - Glass Filled ...

DN: 1.6 mm - 3.2 mm
Pressure: 100 psi

... Beswick selector valve can be used as a quiet replacement for solenoid valves in many applications, and has the ability to operate from a servo motor. The SVPC series rotary selector is a variation of ...

DN: 4 mm
Temperature: -18 °C - 93 °C

... sensing technology • Direct valve-to-vacuum cup mount Note: These valves are designed to not seal shut completely. This purposeful small vacuum loss allows the valves to have immediate ...

DN: 6 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C

... GEMÜ 507 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel and is manually operated. The valve spindle is sealed by a self-adjusting gland packing providing ...

DN: 35.69 mm - 38.1 mm
Pressure: 2 bar - 7 bar
Temperature: 0 °C - 60 °C

The GEMÜ Q30 2/2-way pinch valve has a plastic piston actuator and is pneumatically operated. The valve guides a tube which is compressed from above by a compressor to control and regulate ...

DN: 12 mm - 20 mm
Pressure: 0 bar - 6 bar
Temperature: -10 °C - 80 °C

The GEMÜ 610 2/2-way diaphragm valve has a low maintenance plastic piston actuator and is pneumatically operated. An integral optical position indicator is standard. Normally Closed (NC), Normally Open ...

T-EAV 912 series electric actuated PVC body is a on-off and proportional controlled electric actuated ball valve. The body is made from aluminum material. The housing is compose of aluminum alloy. The ...

Temperature: -10 °C - 95 °C

Tork's T-PKV .W812 is a butterfly valve which is made up of PVC with an extensive pressure of 10 bar and a maximum temperature that ranges from -10 up to 95° C. The unit has EPDM,VITON for its seal. The ...

Pressure: 16 bar
Temperature: 0 °C - 80 °C

The T-PAV 913 features PVC body it has 2/2 way,double acting actuated ball valve. The brand of the product is TORK. The minimum pressure is 0 and goes up to 16 bar. The minimum temperature is 0 and goes ...

DN: 25 mm - 100 mm
Pressure: 3.5, 1 bar

Double O-ring shaft seals (3" & 4") exchangeable (EPDM or FPM) Safety close system Full flow ¼" × 20 male thread on shaft for easy handle extension (3" & 4") Simple and maintenance free operation Seal materials - EPDM, FPM

DN: 3, 2, 1.5 in

... sealing materials and pressure springs (installed on the valve plate) Pressure tightness and operation tests according to DIN 3230 Easy installation of a AQUASTAR automatic back wash valve ...

DN: 25 mm - 150 mm
Pressure: 0.6 bar - 10 bar
Temperature: 70 °C

The RAF 31 electric valve is a Normally Closed (N.C) line pressure hydraulically actuated. The RAF 31 (N.C) valve opens when 3-W plastic solenoid valve is energized. ...

DN: 25 mm - 150 mm
Pressure: 10 bar
Temperature: 70 °C

... RAF 68R maintains a minimum upstream pressure, as set on the 3-W pressure sustaining plastic pilot and a maximum downstream as set on the 3-W pressure reducing plastic pilot. The minimum upstream and ...

DN: 25 mm - 1,500 mm
Pressure: 0.6 bar - 10 bar
Temperature: 70 °C

The RAF 6R-31 is an electric On/Off valve, controlled by a 3-W plastic solenoid valve (N.O.). When the solenoid is energized the valve opens and acts as a pressure reducing ...

DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C

The most standard Speed Control Valve for driving devices. The tube lead-out directions are free. The resin body rotates and the tube lead-out direction can be changed. For Free type, the fitting part rotate. For ...

DN: 4, 6, 8, 10, 12 mm
Pressure: 0 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C

Best suitable for high-speed drive cylinder. Possible to control high-speed cylinder. Exhaust needle valve type, whose exhaust port incorporates throttling function, is available. Tube O.D. 3mm is available for ...

DN: 4, 6, 8, 10, 12 mm
Pressure: 0 MPa - 0.6 MPa
Temperature: 0 °C - 60 °C

Pressure control valve saves compressed air consumption. In driving an actuator under high pressure, compressed air can be saved by use of the pressure controller to reduce the pressure only during home return. Controls ...

DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C

Angle Seat Valve with Plastic Operator (NC/NO/Double Acting) > Port: - Refer below technical data sheet (Available BSP / NPT) > End Connection: - Screwed / Flange / Tri-Clamp > Body ...

DN: 4, 8, 6 mm

The Burkle 2 and 3-way valves are utilized for transferring liquids or gases in order to release, block, or divert the direction of the flow. The PVDF-transparent framework allows optimum chemical resistance which makes ...

DN: 25 mm - 1,000 mm
Pressure: 1 mbar - 16,000 mbar
Temperature: -40 °C - 230 °C

Plastic lined butterfly valves SBP are available in either wafer or lug style for on/off, throttling or control applications for liquid, powdery media or gaseous service. Main features • Large selection ...

DN: 0.25 in - 8 in
Pressure: 1,494 psi

... requirements provides a sufficient safety factor during operation. A special hybrid seat design is comprised of a metal housing and polymer insert machined as a single unit provides bubble tight shut-off (Rate A), combined ...

DN: 0.25 in - 8 in
Pressure: 255, 414 bar

... which provides a sufficient safety factor during operation. A special hybrid seat design is comprised of a metal housing and polymer insert machined as a single unit, which provides bubble tight shut-off (Rate A) combined ...

DN: 0.25 in - 6 in
Pressure: 3,700 psi
Temperature: 650 °C

... requirements provides a sufficient safety factor during operation. A special hybrid seat design is comprised of a metal housing and polymer insert machined as a single unit which provides bubble tight shut-off (Rate A), ...

DN: 50 mm - 60 mm

Specifications Valve types • regulating valve, elbow regulating valve • fine regulating valve, elbow fine regulating valve • taper seat non-return ...

DN: 10 mm
Pressure: 4 bar
Temperature: 48 °C

Front control valve in stainless steel, inlet and outlet SS tube 10x1mm, for special waters Plastic headwork TECHNICAL FEATURES Media: Special Waters Maximum pressure: 4 bar Maximum temperature: ...

Pressure: 4 bar

Front control valve in stainless steel, inlet and outlet G1/4" female, for special waters Plastic headwork TECHNICAL FEATURES Media: Special Waters Maximum pressure: 4 bar Maximum temperature: ...

Pressure: 4 bar
Temperature: 48 °C

... DIN 12918-1 Inlet / Outlet: Female thread ISO 228 G1/4" Main materials Tap body: Polypropylene Headwork: Plastic, 1/4 turn ceramic sealing Handle: ABS Flange: ABS, white colour* *Options ...

DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... EPDM-seat gasket cone rotatable, protected against water hammer flange connection without drain port (drain valve cannot be added) spindle thread not in contact with medium with a black handwheel ...

DN: 15 mm - 80 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... sensor or thermometer can be added using immersion sleeve spindle thread not in contact with medium wear-resistant valve seat made of stainless steel up to DN 50 with a black handwheel free from dead ...

DN: 50, 15, 40, 25 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... Standards and Approvals DVGW approval ÖVGW approval SVGW approval WRAS approval VA approval plastic parts with KTW approval according to accepted materials list from German environmental ...

Pressure: 150 psi

• True union design make it have functionality of union and screw. • Easy to disassemble w/o special tool • Less on-line down time for replacement/ maintenance. Time Saving in pipeline maintenance and replacement • Health, ...

DN: 50 mm - 200 mm
Pressure: 10, 16 bar

... Ideally suited for flow control in a minimum piping space • Easy to mount actuator with flat zone design at the top of valve

DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h

Hydraulic control valve used to reduce the inlet pressure to a preset lower level pressure in the outlet by means of a three way plastic reducing pilot incorporated. This valve controls ...

DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h

Hydraulic control valve used to reduce the inlet pressure to a preset lower level pressure in the outlet by means of a three way plastic reducing pilot incorporated. The control of the valve ...

DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h

Hydraulic control valve used to maintain upstream pressure value constant. The valve opens when the inlet pressure reaches a preset level by means of a three way plastic reducing pilot ...

DN: 6 mm - 50 mm
Pressure: 6, 10, 8, 4 bar
Temperature: -20 °C - 140 °C

... over compression of the diaphragm. The diaphragm valve can be actuated either manually or pneumatically (stainless steel pneumatic diaphragm valve) and controlled by control tops and solenoid valves. Straight ...

DN: 6, 4, 8 mm
Pressure: 0 bar - 20 bar
Temperature: 0 °C - 140 °C

... pipelines. Check valves (push-in) Check valves allow flow in one direction and reliably prevent backflow of the medium. Versions in metal as well as plastic and various designs such ...

DN: 4 mm
Pressure: 0 bar - 6 bar
Temperature: 0 °C - 140 °C

... anti-vacuum membrane solenoid valve and relief valve regulates negative pressure via an anti-vacuum membrane, with a relief valve opening in the event of overpressure and relieving upward ...

DN: 15, 8, 10 mm
Pressure: 8, 10, 6 bar
Temperature: -20 °C - 140 °C

The ball and shut-off valves are available in 2-way and 3-way configurations and in a wide variety of threaded connections – including push-in. The different flow capacities ensure a reliable solution to the specific ...

DN: 0.75 in - 2 in
Pressure: 0.3 bar - 10 bar
Temperature: 5 °C - 50 °C

... Diaphragm: NR •Body material: Plastic Function2 Way Ports size3/4", 1", 1-1/2", 2" BSPT & NPT Pressure range0 3 to 10bar Temperature rangeFluid : 5ºC to 50ºC (no freezing) Materials in contact with mediaMain Valve: ...

DN: 0.75 in - 2 in
Pressure: 0 bar - 10 bar
Temperature: -5 °C - 60 °C

... •Body material: Plastic Function2 Way NC Ports size3/4", 1", 1-1/2", 2" BSP & NPT Pressure rangeSee table Temperature rangeFluid : -5ºC to 50ºC (no freezing) Ambient : -10ºC to 50ºC Materials in contact with ...

DN: 0.75 in - 2 in
Pressure: 0 bar - 5 bar
Temperature: -5 °C - 60 °C

•Ports size: 3/4″ – 2″ BSP, NPT •Orifice size: 27.0, 55.0 mm •Body material: Plastic

DN: 3 nm - 12,000,000 nm

Fitting of H300U - Integral Bonnet Needle Valve Integral Bonnet Needle Valve Products Found: 216 FEATURES • - Certified for ISO 15848-1:2006(E) • - Straight and angle pattern • - Stainless Steel ...

DN: 4, 5, 6, 8, 10 mm
Pressure: 10 bar - 400 bar
Temperature: -20 °C - 100 °C

... for Slightly Corrosive Industrial Fluids Technologies: • - Pressure relief valve • - Industrial valves • - Gauge valve • - Brass needle valve • - Stainless Steel ...