DN: 0.25 in
Pressure: 0 bar - 200 bar
Temperature: -20 °C - 70 °C
... The rossignol metering valve will be fitted di- rectly to the cylinder valve. Due to the slim conus of the metering spindle the rossignol valve guarantees precise metering. As an option the valve ...
Hornung GmbH
DN: 1 mm - 2.3 mm
Pressure: 0 psi - 3,000 psi
... Series SOV Shut Off Valves offers low torque, quarter turn, positive shut off of forward flow up to 3000 Psig (207 Bar). These valves feature a one piece body construction with a machined metallic replaceable plug Stem. ...
Generant
Pressure: 5,000, 3,000 psi
Temperature: 0 °F - 225 °F
... Use to slowly or quickly bleed pressure from a line after a calibration is complete • Easily connect between the end of a Quick-test hose and the process connection • Keep fluid or contaminates out of the hand pump, calibrator or nitrogen control ...
Ralston
DN: 0.5, 0.75 in
Pressure: 10.3, 6.9 bar
Temperature: 149 °C
... Protection Valve is installed into the lowest point within the heated system. The thermal actuator is tee’d into the NPT threaded opening with adequate internal clearance to monitor the water temperature. When the water temperature drops ...
Thermomegatech
DN: 15 mm - 20 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 120 °C
... In media-separated piston valves, a pivoted lever in conjunction with the membrane fitted on it ensures low-friction power transmission with high tightness. Due to the “lever arm effect”, only a small dimensioned pneumohydraulic drive ...
DN: 2 in - 12 in
Pressure: 10, 16, 175, 235 bar
Temperature: 0 °C - 100 °C
... maximum limited level, the float pilot valve will fully close and the basic valve automatically closed. When the water level drops to the lowest limited level, the float pilot valve will be fully open, ...
Taloar
DN: 10 mm
Pressure: 350 bar - 400 bar
IMF
DN: 0.063 in
Pressure: 125 psi
Temperature: -20 °F - 160 °F
... “300” Series Cartridge Valves are ideal for manifold systems and applications where space is limited. These 3-way normally closed valves are made from brass and electroless nickel plated ...
DN: 2.3, 4.5 mm
Pressure: 0.1, 0.3 MPa
Temperature: -40 °C - 70 °C
... The PV03 series proportional valve by Keyto offers precise control of gas flow in ventilator systems, with spool flow paths ranging from 2.3mm to 4.5mm and a maximum flow rate of 180L/min. It supports both open and closed-loop control, ...
DN: 0.375 in - 1 in
... Description: Series GBV 2-Piece Brass Gas Ball Valves are used in residential applications for manufactured natural gas and LP gas on in-house and indoor piping systems. It features a brass ball and ...
DN: 10 mm
Pressure: 0.2 bar - 10 bar
Temperature: 5 °C - 60 °C
... industrial applications, containers are usually kept at a constant filling level by using float valves. Valves of this design are 2-chamber globe valves and have an additional back flow preventer to ...
DN: 8 mm - 100 mm
Temperature: -20 °C - 230 °C
... YR240 Brass ball valves PN 40 with pneumatic actuator -Full bore ball valve -Anti blow out stem -Top-flange according to DIN-ISO 5211 -Direct mounting TECHNICAL CHARACTERISTICS Temperature-20°-120°C Fluidair, ...
DN: 0.125 in
Pressure: 0 bar - 34.5 bar
Temperature: 0 °C - 121 °C
... product line. The valve body is precision machined chrome plated brass or type 316 stainless steel. MATERIALS OF CONSTRUCTION O-RINGS PTFE and Buna-N standard with brass valves; ...
Aalborg Instruments
DN: 20 mm - 150 mm
Pressure: 6 bar
Temperature: 2 °C - 110 °C
... : 3-way valves with nominal diameters DN 20...150 MH42F: 4-way valves with nominal diameters DN 32...50 Can be combined with the AR30 and ASM 105, 115, 124 motorised actuators Manual adjustment by a lever Body made ...
Fr. Sauter AG
DN: 40 mm - 300 mm
Pressure: 10, 8 bar
Temperature: -10 °C - 150 °C
... and handwheel. Brass stem and seats. Connection flanges dressed and drilled according to EN 1092-2 PN 10 with raised face. Honzontal or vertical installation. Max working temperature with standard gaskets +80° C. Gate valves, ...
Mival
DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 140 °C
... vertical to horizontal (in relation to shaft) Materials Case : brass (DIN EN 12165, CW617N) Valve ball : stainless steel (EN 10088-2) Valve shaft : stainless steel (EN 10088-2) Valve ...
GRUNER
DN: 0.5 in - 2 in
Pressure: 28 bar
... The NIBCO® brass ball valve with threaded end connections provides bubble-tight shutoff at 400 PSI. The valve's PTFE seat ring and hard chrome-plated brass ball exhibit high chemical ...
NIBCO
DN: 80 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 50 °C
... Resilient-seated gate valve with boltless cover connection as replacement valve for the dismantling of flanged valves according to EN 558-1 (DIN 3202, F 5). Proven design with innovative improvements, ...
VAG-Group
Temperature: -40 °C - 275 °C
... Roda Deaco Model RB3A is a compact butterfly design air intake shutoff valve available with electric or mechanical actuation. Actuation of the Model RB3A closes the valve’s sealing element which shuts off intake air flow ...
DN: 0.25 in - 4 in
Pressure: 125 psi
... Threaded, 2-Piece, Full Port, Brass Ball Valve, 600 CWP, Sizes: 1/4" to 4" (DN 8 to DN 100), Approvals: CSA, FM, UL, NSF 61. This model has been discontinued and replaced by the 77F / 77FLF Series. ...
Conbraco Industries
DN: 25, 20, 15 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
... pumping and all fluid applications Ball bib cock with nose connection Standard passage SEALS : PTFE ...
SOCLA
DN: 15 mm - 50 mm
Pressure: 16 bar
Temperature: -10 °C - 120 °C
... Body material Forged brass Stem material Stainless steel Diaphragm EPDM Tightness PTFE ...
TECOFI
DN: 0.5 in - 2 in
Pressure: 25, 16 bar
Temperature: -5 °C - 90 °C
... temporarily dunng 1 hour max ) • - Max Pressure Ps ( excepted drain valves types ) : 40 bars up to DN 3/4*, 25 bars from 1“ to 1*1/4.16 bars over • - Max pressure Ps for drain valves types : 25 bars from 1/2* to 1"1/4. ...
SFERACO
DN: 60 mm
... male thread 2.5" NST-NH. Metal-seated valves will not guarentee total waterproofness. Maximum working pressure: PN16 Valve type: gated valve Operation: by flywheel Material: aluminium alloy Coating: ...
DN: 6 mm
Pressure: 3 bar
Flow rate: 180 l/h
... The TFJ-1 regulator valve is specifically designed to be used in small gas cylinders and can accommodate Oxygen. It is integrated with a maximum pressure input of 3.5 MPa, and a maximum output pressure of 0.3 MPa. This regulator valve ...
Xuzhou Hongye Apparatus & Instrument Co.,LTD
the best suppliers