- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Metal fitting >
- Trelleborg Fluid Handling Solutions
Trelleborg Fluid Handling Solutions metal fittings
Operating pressure: 300, 200 bar
Diameter: 20, 25, 32 mm
NORMA® Compression fittings are made of polypropylene for high-and-low density polyethylene tubing, diameters 16 to 110. Maximum service pressure: PN 16* bar from diameter 16 to diameter 63 – PN 12.5 bar from diameter ...
Push type, plated fittings permit lubricant to flow. Built-in ball, under spring pressure, prevents dirt from entering. Handy kit for shop toolroom or toolbox. On hand when needed saves time and money. Plastic compartment ...
Diameter: 1.2 mm - 4.1 mm
Straight push-in fitting M-Push 110 brass design nickel-plated with male thread and external hexagon Type: gerade Steckverschraubung Operating pressure: -0,75 – 10 bar Temperature range: 0 °C to +60 °C Material ...
Diameter: 0.75 in
Operating pressure: 5.17 bar
Brass Stamped Female Hose Nut to Machine Hose Barb Swivels Description: Ideal for use with any standard 3/4 in. (20mm) garden hose. Swivel allows hose to spin freely of the threaded connection to prevent accidental disconnection and ...
Watts Water Technologies
Diameter: 4 mm - 25 mm
... production of fittings. They are manufactured in three types of materials: 316 grade stainless steel, carbon steel and brass. In installations with plastic tubing, the rings will be made of nylon for brass fittings ...
Quick couplings made of brass, steel and stainless steel Mono- and Multicouplings Flat-Face-Couplings Safety couplings Temperature control couplings Hydraulics, pneumatics, water, gas
Rastelli Raccordi manufactures 37° fittings for flared tubes in carbon steel and stainless steel in compliance with SAE J 514/ISO 8434-2. The particular features of the SAE J 514 – 37° fittings ...
... . They are available in STANDARD and INTERLOCK versions The complete range is in carbon steel and, on request, in stainless steel Rastelli Raccordi accomplishes market requests and customer needs by its hose couplings ...
Operating pressure: 350, 700 bar
Connect 2 Quick-test XT 10,000 psi hoses together quickly and easily • Quick-test XT connection makes connecting two high pressure hoses together quick and easy • Note that these are not compatible with QT or QS hoses. Please ...
Ralston
Operating pressure: 350 bar
... other side • Bulkhead seals so no liquid or moisture can get into a control panel or enclosure • Use to connect fittings on the inside of an enclosure to a Quick-test hose on the outside of the enclosure ...
Ralston
Operating pressure: 350 bar
Connect three hoses or a combination of 3 hoses, adapters and hand pumps or manifolds • Durable forged construction • Tee has full flow through each of the ports • Made in USA
Ralston
... Socket weld Fittings, Forged Socket weld Equal Tee, Cross Stainless Steel Forged Fittings, Forged Elbow, Threaded Fittings, Socket weld Pipe Fittings, ...
Diameter: 15 mm
Operating pressure: 20 bar
... Brass, »sharkbite«, G 1/2, for pipe exterior Material Brass CW602N O-Ring Nitrile Cartridge ring Stainless steel 304 Grab ring Stainless steel 316 Alignment ring Acetal Disconnecting ring Acetal
RIEGLER & Co.KG
Diameter: 58.7 mm
Operating pressure: 20 bar
Irrigation connector F inlet and F outlet, DIN 2999 threaded Cod. G64.01 Irrigation elbow for hydrant connection
Diameter: 0.25 in - 4 in
Langley Alloys are able to provide a wide range of olet fittings. Olets come in many different specific forms, allowing end users to create branching fittings along the main run of piping. They are sized ...
Diameter: 0.25 in - 4 in
The sourcing of fittings can be a challenging and time-consuming process given the immense number of different configurations. Fortunately, Langley Alloys is well-placed to source and manufacture fittings ...
Diameter: 0.5 in - 100 in
Brass fitting fire thread from 100 to 3 1/2″ and to 4″
Diameter: 0.13, 0.25 in
These compression fittings are for use with numerous applications. There are brass compression fittings with a parallel thread and brass compression fittings with a tapered thread. Numerous ...
Diameter: 21.3 mm - 88.9 mm
Operating pressure: 4 bar - 16 bar
Model: - Compression pipe coupling - Material body: - malleable iron galvanised Connection: - Conical clamping ring - Material seal: - NBR Temperature: - +80 °C - Bending angle: - 3 degrees Pressure: - 16 bars (water) - Use: - New ...
Diameter: 6 mm - 108 mm
Operating pressure: 25, 16, 10, 45 bar
... solder and transition fittings for copper pipes according to EN 1057 and EN 13348 for hard and soft soldering. All products are certified according to many national and international certification bodies. SANHA capillary ...
SANHA GmbH & Co. KG
Diameter: 15 mm - 108 mm
Operating pressure: 16 bar
Description NiroSan SF Tee, female ends 19130 - NiroSan SF Tee
SANHA GmbH & Co. KG
Diameter: 15 mm - 54 mm
Description NiroSan Bend 90°, male plain ends 9003
SANHA GmbH & Co. KG
Diameter: 63 mm - 315 mm
This special version of our pressure class-compatible tees enables a measuring device to be connected directly via an integrated pipe thread. Its compact dimensions mean the threaded connection is situated close to the pipeline. This ...
Diameter: 18 mm - 114.3 mm
... alloy fittings for butt welding parts such as elbows, backhaul, covers, tees, reducing pipes, lap joints, and other types. We are a reliable distributor, manufacturer, stockist, supplier, and trader of Titanium tees. The ...
Diameter: 15 mm
... interviews in various countries. With the innovative Acoustic Leak Alarm, detect leaks quickly and easily, as any non-pressed fitting will produce a loud whistling sound. Used by installers and above-ground specifiers ...
Wavin
Diameter: 80 mm - 1,200 mm
Kolk flanged fittings are made of ductile iron GJS-400/500 (DIN1693 GGG-40/50). Designed acc. to EN 545, flange drilling acc. to EN 1092-2 (ISO 7005-2). Epoxy coated (Resicoat®) acc. to EN 14901 (DIN 30677-2) and GSK ...
Diameter: 4 mm - 16 mm
Diameter: 3.3 mm - 24 mm
Diameter: 4 mm - 22 mm
Operating pressure: 190 bar
Long description - Braze banjo Metric SBM - Technical information - Acc. DIN 7622.
Kramp
Diameter: 16 mm - 75 mm
Clamping connector / screw connector without support tube for optimum grip and durability. The product group A3 is just right for anyone who wants to work fast, cost-effective and space-saving. The separate sealing and clamping function ...
BEULCO GmbH & Co. KG
Diameter: 1 in - 8 in
... threaded nipple NPT or BSP Material: Carbon Steel, Stainless Steel, Aluminium, Brass, Polypropylene Ferrule: Carbon Steel, Stainless Steel
Trelleborg Couplings & Accessories
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining