- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Screw-in fitting >
- Trelleborg Fluid Handling Solutions
Trelleborg Fluid Handling Solutions screw-in fittings
Diameter: 0.13 in - 2 in
Operating pressure: 40 bar - 50 bar
In order to obtain the permitted operating pressure of a hose stem connection, the maximum permitted operating pressure of the hose should be observed.
Schwer Fittings
Diameter: 0.13 in - 4 in
Operating pressure: 10 bar
GF-140C Conical seal with parallel BSP thread to DIN EN 10226
Schwer Fittings
Diameter: 4 mm - 38 mm
Operating pressure: 100 bar - 400 bar
Schwer Fittings
Diameter: 6.3 mm - 50 mm
Operating pressure: 15,000,000 Pa - 50,000,000 Pa
Series ANV Features - Connection system: pulling back the sleeve - Disconnection system: pulling back the sleeve - Shut-off system: poppet valve - Connectability: without pressure - Disconnection under pressure: not allowed - ...
FASTER S.p.A.
Diameter: 0.5 in
Operating pressure: 16 bar
TECHNICAL DATA Material Body and thrust ring: nickel plated brass Thread Metric, taper and parallel Seal NBR rubber Clamp Stainless steel AISI 316 Size M5 ÷ G 1/2 Fluid Air, water, oil, steam Working temperature ...
Waircom
Operating pressure: 25 bar
ELAFLEX delivers for hoses suitable connection fittings. The ferrule hose couplings with union nut (female thread) and male thread, suitable for self-assembly. Working pressure up to 25 bar. Meets EN 14424. Female ...
Elaflex Hiby GmbH & Co. KG
Diameter: 25 mm - 100 mm
Operating pressure: 25 bar
ELAFLEX delivers for hoses suitable connection fittings. Hose couplings with female thread to EN 14420-5 with re-usable SPANNFIX pinned safety clamps of hot stamped aluminium. Pins stainless steel. Working ...
Elaflex Hiby GmbH & Co. KG
Diameter: 13 mm - 100 mm
Operating pressure: 25 bar
... connection fittings. Hose couplings with male thread to EN 14420-5 with re-usable SPANNLOC bolted clamps of hot stamped aluminium. Bolts and nuts steel, zinc plated and chromated. Working pressure up ...
Elaflex Hiby GmbH & Co. KG
Diameter: 11 mm
The system variacor®, patented internationally, allows, with these two joint-turning, to make flexible and directional all the rigid and semi-rigid pipes, whatever is their natures and applications. Cost saving : no more premature ...
MID - VARIACOR
Diameter: 11 mm
Operating pressure: 40 bar
Eliminates premature wear of the supply hose. Reduces muscle strain caused by the rigidity of the flexible, easy washing in places with difficult access. Durable, thanks to mechanical stainless steel components and Aluminium ...
MID - VARIACOR
Diameter: 4 mm - 12 mm
Operating pressure: 250 bar
Industrial, professional, is you it ever managed to have problems to link your hydraulic installations, to repair or to modify your machine tool? As soon as the slope of connectings that you looked for is not usual, you are obliged ...
MID - VARIACOR
Diameter: 0.5 in - 2 in
FEATURES clamps BS 4825 Material: stainless steel 316 L DIN 11851 is available upon request as well as further models APPLICATION: food and pharmaceutical industries, where high hygienic standards are required
... a tube. Solid Hex Plugs Solid Hex Plugs are also for customers that take standard fitting and weld or thread non standard sizes on one end or make a custom fitting while embedding ...
PUSHNA INTERNATIONAL
Compression fittings are used for connecting metal tubes useful for high and low temperature applications ad compatibility with aggressive fluids these can be seen in systems varying from gas lines in refineries , to ...
PUSHNA INTERNATIONAL
Compression fittings are used for connecting metal tubes useful for high and low temperature applications ad compatibility with aggressive fluids these can be seen in systems varying from gas lines in refineries ...
PUSHNA INTERNATIONAL
Diameter: 100, 80 mm
QUICK-ACTION COUPLINGS FOR SYSTEMS WITH MORE OUTLETS Quick Couplings Geovent Quick couplings The Geovent quick couplings for medium pressure are manufactured in powder coated steel (RAL 1007). The quick couplings are supplied for installation ...
Manufacturing Process CNC Machining & Injection Molding Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature ...
Diameter: 12, 10, 4, 8, 6 mm
Operating pressure: -0.1 MPa - 1 MPa
These piping joints are use for swiveling and swinging connections. The joints incorporating a ball bearing, are suited for fast continuous swiveling and swinging connections. For price options, please contact our distributor ...
NIHON PISCO CO., Ltd.
Diameter: 12, 6, 4, 10, 8 mm
Operating pressure: -0.1 MPa - 1 MPa
Push-in fitting joint best suitable for high-speed swiveling and swinging connections. By employing two ball bearings, suitable for high-speed swiveling and swinging connections where the Rotary Joint cannot cover. For ...
NIHON PISCO CO., Ltd.
Diameter: 12, 6, 4, 10, 8 mm
Operating pressure: -0.1 MPa - 0.7 MPa
Push-in fitting for piping of rotating section for corrosion-resistant environment. SUS304 push-in fittings for oscillating and rotating sections that can be used with water. *Only water specification ...
NIHON PISCO CO., Ltd.
Diameter: 2, 2.5, 3, 4 in
Operating pressure: 40 bar
Swivel joint – direct-flangeswivel Product characteristics steel (42CrMo4) or stainless steel (1.4571) PTFE-Compound-seal built-in ball guiding tracks similar to ball bearings swiveling, rotating movements with ...
HAAG + ZEISSLER Maschinenelemente GmbH
Diameter: 2 in - 32 in
Operating pressure: 40 bar
Swivel joint – direct-flangeswivel, Product characteristics steel (42CrMo4) or stainless steel (1.4571) PTFE-Compound-seal built-in ball guiding tracks similar to ball bearings swiveling, rotating movements with ...
HAAG + ZEISSLER Maschinenelemente GmbH
Diameter: 0.25 in - 2 in
Operating pressure: 350, 100 psi
Swivel joint – heavy version with thread connections, nominal diameters G1/4″ – G2″ Product characteristics steel (42CrMo4) or stainless steel (1.4571) PTFE-Compound-seal built-in ball guiding tracks ...
HAAG + ZEISSLER Maschinenelemente GmbH
Diameter: 20 mm - 63 mm
Operating pressure: 16 bar
EQOfluids FR
Diameter: 20 mm - 63 mm
Operating pressure: 16 bar
EQOfluids FR
Diameter: 20 mm - 63 mm
Operating pressure: 16 bar
EQOfluids FR
Diameter: 2, 3 in
Operating pressure: 0 bar - 8 bar
It's a Safety accessory in according with Directives ATEX 2014/34/EU and PED 2014/68/UE. The dry quick coupling is used to prevent any possible leaking during the process of transferring hazardous fluids in différent fields of application ...
Diameter: 3 mm
Temperature Technology Ltd
Diameter: 1 mm - 8 mm
Temperature Technology Ltd
Diameter: 1.5 mm - 8 mm
Temperature Technology Ltd
Diameter: 10 mm - 56 mm
Metal connector, safety-type straight, outer thread metric or PG incl. ferrule [brass/plastic], sealing [TPE] or brass thrust collar and O-ring [NBR] Material: nickel-plated brass Temperature range: -40°C ... +125°C -40°C ...
flexa
Diameter: 10 mm - 56 mm
Metal connector, safety-type straight, metric outer thread, strain relief, incl. ferrule, sealing made of TPE or brass thrust collar [MSD] and O-ring Material: nickel-plated brass Temperature range: -40°C ... +100°C Prot. rate ...
flexa
Diameter: 17 mm - 27 mm
Metal connector, safety-type straight, metric outer thread, strain relief for application in EX-Area, incl. ferrule, sealing made of TPE or brass thrust collar [MSD] and O-ring made of NBR Material: nickel-plated brass Temperature ...
flexa
Diameter: 4, 5, 6, 8, 10 mm
Operating pressure: 16 bar
... temperature : -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum : max 98% Materials : NBR seals Black thrust ringCW614N and CW617N plastic Thread ...
ITV
Diameter: 3 mm - 14 mm
Operating pressure: 16 bar
... temperature : -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum : max 98% Materials : NBR seals Black thrust ringCW614N and CW617N plastic Thread ...
ITV
Diameter: 4 mm - 14 mm
Operating pressure: 16 bar
... temperature : -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum : max 98% Materials : NBR seals Black thrust ringCW614N and CW617N plastic Thread ...
ITV
... For Insertion into Threaded Entries or Knockout to Connect Conduit • - Color: Black • - Material: Polyamide/Nylon 6.6 • - Number of Batteries: 0 • - Product Name: plastic fitting for conduit • ...
Shenzhen Milvent Technology Co.,Ltd
Diameter: 12 mm
Operating pressure: 1 bar
Product details Thread: Metric, PG, G(PF), NPT Materials: UL approved and halogen-free nylon PA66(Flammability UL94V-2) for A.C.F parts. EPDM rubber for B. D parts. (Accept to order super rubber: high temperature resistance, ...
Shenzhen Milvent Technology Co.,Ltd
Materials: UL approved Nylon PA66 ( Flammability UL94V-2)Working temperature: -40℃-100℃, can up to 120℃ in short time. Features:Strong tensile strength, Fast plugging and unloading, improved the installation efficiency.Can be used for ...
Shenzhen Milvent Technology Co.,Ltd
Diameter: 0.25 in - 2 in
Operating pressure: 10 bar
Port Refer below technical data sheet (Available BSP) Media Air, Water, Oil, Gas Upto 10 bar Temperature 85" C (Chilled water & high température available on request) RPM 1000 RPM High-Perfomance Bearings & Seals Dual Connection Available
UFLOW AUTOMATION
Diameter: 4 mm - 16 mm
... tight sealing of tubes Durable & Maintenance free Pneumatic cylinders (ail types) Pneumatic control & circuit panels Ail Threaded nipples has plastic portion that is capable of rotating 360° Compatible with both ...
UFLOW AUTOMATION
Diameter: 4 mm - 12 mm
... tight sealing of tubes Durable & Maintenance free Pneumatic cylinders (ail types) Pneumatic control & circuit panels Ail Threaded nipples has plastic portion that is capable of rotating 360° Compatible with both ...
UFLOW AUTOMATION
Diameter: 2 mm - 8 mm
Operating pressure: 630, 500, 320 bar
With Oleotec hoses and fittings, pressure can be checked while hydraulic systems are at full pressure. Micro-fittings and micro-bore hoses can bear a working pressure of max. 630 bar. All fittings ...
Diameter: 15 mm
Fitting for water connection with female thread (F) 15x1/2 EF Fitting Stahlmann ensures leak-free installation of Stahlmann corrugated stainless steel tube solutions. The product ...
Stahlmann
Diameter: 50 mm - 315 mm
Operating pressure: 10, 16 bar
Double socket with internal threaded branch Features Standard with an internal threaded branch 2"
Frischhut
Diameter: 40 mm - 400 mm
Operating pressure: 10, 16 bar
According to DIN 28601; DIN EN 545 series A From DN 500 only with gland sockets deliverable (according DIN 28602) Features Special coatings: Coating inside and outside Epoxy redbrown for sewage water Coating inside ...
Frischhut
Diameter: 80 mm - 160 mm
Operating pressure: 10, 16 bar
Flanged socket 90° duckfoot bend without threaded branch Features Material: ductile cast iron
Frischhut
The stainless steel barrel screw joint with a R 2" steel fine outer thread for tubes with a diameter of 32 mm.
Diameter: 1.6 mm - 11.5 mm
Operating pressure: 0 bar - 7,000 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Multi-coupling-system
Diameter: 3.2 mm - 17.5 mm
Operating pressure: 0 bar - 1,400 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Multi-coupling-system
Diameter: 3 mm - 20 mm
Operating pressure: 1,050 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Multi-coupling-system
Diameter: 16 mm - 63 mm
90° Tee with threaded female take off DeltaPress brass press fittings
Unidelta S.p.A.
Diameter: 3 mm - 14 mm
Operating pressure: 0.5 bar - 12 bar
Series of push-in fittings with reduced dimensions and new collet and release collar. They are for connecting nylon and polyurethane tubes. Available in various configurations (studs, elbows, T, Y) and with threads Gas ...
Diameter: 2.5 mm - 15 mm
Operating pressure: 0.5 bar - 12 bar
Series of rapid fittings for connecting nylon and polyurethane tubes. They should be used in all those applications where a safer tube-fitting connection is required. Available in various configurations ...
Diameter: 0.125 in - 1 in
Operating pressure: 0.5 bar - 12 bar
Series of standard fittings available in various configurations to adapt the connections of every installation according to one’s requirements. With threads Gas taper (BSPT) and Gas parallel (BSP).
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining