... the settings of the internal digital filter. The communication interfaces with the SLI-8 include RS485 and Modbus RTU. As for the breakdown voltage, all eight inputs are galvanically isolated from the RS485 interface ...
Cube20 is a centralized IP20 I/O station with modular function modules and the ability to connect direct to Cube67 modules. The compact modules have a high signal installation ...
MURRELEKTRONIK
... PCD1.Bxxxx-A20 Digital modules - PCD1.Gxxxx-A20 Combined modules
The modules in the Saia PCD1.E-Line S-Series for HVAC applications have a mix of analogue and digital inputs and outputs. With 6 to 12 data points per module, they can be combined easily ...
4-input impulse centralising equipment. Inputs are optoisolated to read impulses and it has a 32-bit memory to store the values metered. - It has an RS-485 communications port that can be used with an RS-232 or Ethernet converter ...
Combined module of digital inputs and outputs with an NPN open collector and a relay. The integrated power supply has enough power even for additional modules on the bus. 8x ...
Combined module of digital inputs and outputs with open collector PNP. 12x digital input 24x digital output with OC-PNP width - 72 mm power supply via bus
The I/O module UG 9460 has 8 digital 24V inputs and 4 relay outputs. Via Modbus the inputs can be read and the outputs can be set individually.
... protocol module and I/O module plug and play, features as below: 1. designed with a max of 64 modules, each I/O module is built with ...
ODOT Automation
... period of 250us.The adapter supports a maximum input of 1440 bytes, a maximum output of 1440 bytes, and 32 pcs of extended IO modules. Hardware Specification System Power： Nominal: 24Vdc, Range: ...
ODOT Automation
The CN-8033 EtherCAT I/O module supports standard EtherCAT protocol access. The adapter supports a Max. input of 1024 bytes and a Max. output of 1024 bytes. It supports 32 pcs of extended IO ...
ODOT Automation
... points of I/O to any solution and is a great choice for expanding X-Series OCS when one or more digital or analogue I/O are required. SmartMod+ I/O are so compact, they ...
Horner Automation
... indicator lights for each I/O point, power and network status -DIN-rail mountable SmartBlock range covers advanced I/O modules like AC Power Monitor, Isolated Thermocouple modules, ...
Horner Automation
... points of I/O to any solution and is a great choice for expanding X-Series OCS when one or more digital or analogue I/O are required. SmartMod+ I/O are so compact, they ...
Horner Automation
... sample rate per channel Status, trigger, tare, alarm, command Signal conditioning 16 virtual channels, linearization, digital filter, average, scaling, min/max storage, RMS, arithmetic, alarm 3-Way galvanic ...
Gantner Instruments
... digitization 19-bit SAR ADC, 100 kHz sample rate 4 Digital inputs and 2 digital outputs status, trigger, tare, alarm, command Signal conditioning 32 virtual channels, linearization, digital ...
Gantner Instruments
... 10 VDC, 20 kHz update rate per channel High-accuracy digitization 24-bit ADC, 20 kHz sample rate per channel 4 digital I/Os input: state, tare, memory reset, output: state, alarm, threshold Signal ...
Gantner Instruments
The ARD Series comprises of remote I/O module. It is integrated with different functions including its automatic communication speed identification and network voltage monitoring duties. A noise resistance ...
Modbus RTU Digital Remote I/O (Sensor Connector Type) The ARM series digital remote I/O units provide input and output expansion for PCs, PLCs, and Autonics logic ...
... series remote I/O boxes transmit various input and output signals between master devices such as PCs or PLCs and secondary devices including sensors and actuators. The IO-Link master type ADIO-ILD can ...
... ServerSave time and wiring cost with peer-to-peer communicationSupports SNMPv1/v2c/v3Friendly configuration via web browserSimplify I/O management with MXIO library for Windows or Linux platformsWide operating temperature ...
Moxa Europe
Z-5DI-2DO is a mixed digital module with a Micro USB front programming port, 5 digital inputs (Redd, Proximity, PNP, NPN, contact) selectable via software, nr.5 totalizers @ 32bit with ...
SENECA | Automation Interfaces
... ,5 ms Operating temperature: - -20..+65°C Dimension: - 35x100x112 mm Digital input: - 16 channels; IEC EN 61131-2; Nr 8 counters @32 bit (max 10 kHz); TPDO < 1 ms Digital output: - 8 channels, ...
SENECA | Automation Interfaces
Z-4DI-2AI-2DO is a I/O module with 4 digital inputs, 2 analog inputs, 2 relay outputs, slave for Modbus RTU, on two RS485 serial ports. The module allows the possibility ...
SENECA | Automation Interfaces
... offer FOX I/O modules for signal processing of 2-16 channels and special functions such as pulse width modulation. This ensures that you always have the right I/O modules ...
Multi I/O is a device that integrates UPS into a control system using fully configurable input and output relay signals. It can be used to connect two devices to a single UPS serial communication port. It can be used ...
Cost-optimized CANopen-slave-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication of the master control unit takes place via CANopen or a layer 2 protocol. The ESX.iox ...
(STW) Sensor-Technik Wiedemann GmbH
The ESX.3ios is a CAN-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication with the master control unit takes place via CANopen, CANopen Safety, the STW ...
(STW) Sensor-Technik Wiedemann GmbH
... and two further digital power outputs (each 4 A). Of these, two half bridges respectively, which can be combined to form one motor full bridge, and one digital output are supplied via a safety relay (max. ...
(STW) Sensor-Technik Wiedemann GmbH
Digital I/O module • 8 digital I/Os • Input 24 V, output 24 V / 0.5 A • Power supply via InRailBus or individual supply via COMBICON ...
CANopen module with 8 digital I/Os • Inputs 24 V • Outputs 24 V/1 A • Input/output programmable CANopen According to CiA® Standards • CiA 301 CANopen application ...
... Series of USB digital devices provide a higher channel count than other digital devices. Each device provides high current, logic-level, bidirectional digital I/O and ...
Measurement Computing
... reliably communicate transducer and switch data by providing a 4-20mA, mV and digital interface in a small footprint radio. The sensor data is transmitted to a remote output as digital and 4-20mA effectively ...
MTL INSTRUMENT
GF 30% Polyamid 8(12)-32 VDC 1S Li-on Battery -40C +80C 1x IMU Sensor Up to 1 Frequency Input Up to 4 Current Inputs Up to 4 Resistive Inputs Up to 4 High-Side Outputs Up to 4 Low-Side Outputs Up to 1 Analog Output Up to 2 ...
Makersan
GF 30% Polyamid 8(12)-32 VDC 1S Li-on Battery -40C +80C 1x IMU Sensor Up to 1 Frequency Input Up to 4 Current Inputs Up to 4 Resistive Inputs Up to 4 High-Side Outputs Up to 4 Low-Side Outputs Up to 1 Analog Output Up to 2 ...
Makersan
GF 30% Polyamid 5(9)-12 VDC -40C +80C 1S Li-on Battery Up to 1 Frequency Input Up to 4 Current Inputs Up to 4 Resistive Inputs Up to 4 High-Side Outputs Up to 4 Low-Side Outputs Up to 1 Analog Output Up to 2 Solid State Relays
Makersan
Expansion connector: 2 PCIe x1 Interface: PCIe x1 gold finger/ PCIe connector (36 pin) (opt.) Security: Security-ROM, Intrusion detection (8 doors) Voltage watcher: Voltage monitoring and warning via MCU
DFI
Port: 1 RJ45/2 RJ45 Interface: PCIe x1 Form Factor: M.2 B-M key 22mm x 42mm (0.87" x 1.65")
DFI
Port: 1 RJ45/2 RJ45 Interface: PCIe x1 Form Factor: M.2 B-M key 22mm x 42mm (0.87" x 1.65")
DFI
>16DI/DO configurable >Support: Profinet, Ethernet/IP, EtherCAT, CC Link IEF Basic protocol fieldbus interface >Protection class: IP 67 (when correctly connected) >Shell material: Nickel plated Gd Zn alloy
Fuyansheng Electronic (Fujian) Co., Ltd.
>16DI/DO configurable >Support: Profinet, Ethernet/IP, EtherCAT, CC Link IEF Basic protocol fieldbus interface >Protection class: IP 67 (when correctly connected) >Shell material: Nickel plated Gd Zn alloy
Fuyansheng Electronic (Fujian) Co., Ltd.
> 16DO >Support: Profinet, Ethernet/IP, EtherCAT, CC Link IEF Basic protocol fieldbus interface >Protection class: IP 67 (when correctly connected) >Shell material: Nickel plated Gd Zn alloy
Fuyansheng Electronic (Fujian) Co., Ltd.
... and CAN connections, with a large selection of, click-on: digital, analogue, and thermo-sensor modules. • Specifically designed for use with IMO i3 and XGB PLC • Analogue and digital ...
... to 76,800 bit/s. The I/O modules are optimally designed for interaction with the BACnet router UBR-01 | Mk II. By using the router, the modules can then be connected to IT networks. Technical ...
... connectors, max. 2.5 mm² Power LED, green, RxD LED yellow TxD LED, red Digital input module DI24 MODBUS (RS485) Operating mode: Slave 24 channels digital ...
The RTD-P high-precision measuring module has been developed for applications which place extremely high demands on resolution and measuring accuracy. The RTD-P modules have an extremely accurate analogue-to-digital ...
HiTec Zang GmbH
... 300 mA/module). • Frequency measurement • Edge detection • Counting input • Period length measurement • Pulse duration measurement • Inputs with connectible NAMUR-compliant level detection system • Status LED ...
HiTec Zang GmbH
... (e.g. a solenoid or reflux separator). • 4 active digital outputs • For direct connection of proportional solenoids • LED control display • Short-circuit-proof • Signal : 4 ...
HiTec Zang GmbH
... using Modbus TCP/IP and MQTT. It has a range of input and output options including 6 digital inputs, 2 digital outputs making it suitable for a variety of remote I/O applications. Automatic ...
Please specify:
Help us improve:
remaining