Multi-Function I/O Module ● 4 Channels Analog input ● 2 Channels Analog output ● 4 Channels Digital input ● 4 Channels Digital output ● All Digital ...
Protech Systems
8 Channels Digital Input and 8 Channels Digital Output I/O Module ● 8 Channels Digital input ● 8 Channels Digital output ● All ...
Protech Systems
5 Channels Digital Input and 6 Channels Relay Output Remote I/O Module ● 5 channels Digital input ● 4 channels Power Relay output and 2 channels Signal Relay output ● ...
Protech Systems
> Inputs: 16 digital inputs > Temperatures: the correct functionality of the node has been verified in a temperature range between -10° and 60 ° C > Power supply: 24V (10-30V) > Galvanic Isolation: 2000 Vca 50Hz > ...
ELCO Elettronica di A. Ligabue e C. snc
> Inputs: 8 digital inputs > Outputs: 8 digital outputs, PNP type > Temperatures: the correct functionality of the node has been verified in a temperature range between -10° and 60 ° C > Power supply: ...
ELCO Elettronica di A. Ligabue e C. snc
> Inputs: 8 digital > Outputs: 8 digital PNP > Maximum speed: 115.2 kbps > Distance reachable: 1.2 km > Power supply: 10 ... 30 V > Galvanic isolation: 200 Vac 50 Hz 1min > Communication: RS485 ...
ELCO Elettronica di A. Ligabue e C. snc
Digital mix modules for the 300 series Input / Output module digital for 300 8x IN / 8x OUT The module has 8 inputs and 8 outputs. General information ...
ZLAN6002 Remote IO Controller is an intelligent device developed by Shanghai ZLAN of digital input output and analog quantity input based on RS485. The remote IO controller can conveniently ...
Shanghai ZLAN Information Technology Co.,Ltd
ZLAN6042 Remote IO Controller is an intelligent device developed by Shanghai ZLAN of digital input output and analog quantity input based on Ethernet or RS485. The remote IO controller ...
Shanghai ZLAN Information Technology Co.,Ltd
ZLAN6802 is 8 channels remote IO controller launched by Shanghai ZLAN after ZLAN6042. The controlled channels from 4 channels of 6042 extending to 8 channels, including 8 channels Digital Input(DI), Digital ...
Shanghai ZLAN Information Technology Co.,Ltd
The DIO021E is a remote I/O with 8 digital inputs, 2 digital outputs and 4 analog inputs, that is controlled via an Ethernet interface. All digital inputs can be used ...
MEN Mikro Elektronik
The DXIO0808C is a remote I/O with 8 digital inputs and 8 combined input/outputs that is controlled via a CAN interface. The combined inputs and outputs are software configured and may be used as I/O ...
MEN Mikro Elektronik
The DXIO0808E is a remote I/O with 8 digital inputs and 8 combined input/outputs that is connected by an Ethernet interface. The combined inputs and outputs are software configured and may be used ...
MEN Mikro Elektronik
... processor module and up to 10 I/O modules in a compact mechanical enclosure - Distributed topology In this topology the Controller is integrated by the central system expanded with ...
... Features ● 8 Ch. Analog Input / 2 Ch. Analog Output slave module ● 8 Ch. Digital Input / 8 Ch, Digital Output slave module ● Max. 100Mbps transfer rate ● Easy installation ...
Taiwan Pulse Motion
Features ● TPM EtherCAT® add-on module ● Local bus support with CAN ● Pluggable terminal block with spring plug connectors ● DIN rail mounting (L-97 x W-100 x H-12 mm) EtherCAT® Serial interfaceFast Ethernet, ...
Taiwan Pulse Motion
... Channel Digital I/O Motionnet® slave module. With CAT5 cable, 106-D2xx Series can be connected serially. It also equipped with RJ45 phone jack for easy installation and LED ...
Taiwan Pulse Motion
... flexible I/O system that can be applied as a local expansion I/O or remote I/O. SmartRail I/O is easily configured using Cscape programming software. Just select your ...
TCW241 is an Ethernet IO module, the right choice for factory automation and distributed process control. TCW241 is an Ethernet IO module with Modbus TCP/IP support. ...
Teracom
TCW122B-CM is a remote IO module with SNMP v1 support. It is dedicated to remote environmental monitoring and control. TCW122B-CM is a remote IO module for environmental ...
Teracom
TCW181B-CM is an Ethernet digital IO module for monitoring of one and control up to eight devices per unit. TCW181B-CM is 8-channel Ethernet digital IO ...
Teracom
The SPiiPlus IOMnt-32-32 (Network Inputs and Outputs Module) is an EtherCAT digital I/O module with 32 inputs and 32 outputs. The input voltage is 24Vdc
EtherCAT ® Digital I/O Modules Powerful Digital and Analog I/O Modules for EtherCAT® Network Up to 32 Inputs and 32 Outputs ...
... cabinet. They’re also excellent alternatives when the use of an active IP67 I/O system would not be cost-effective due to a low signal count or the simple signal conditions (only digital signal acquisition/output). Plug-&-Play ...
... Traditional I/O systems are located centrally in the control cabinet, with extensive wiring required for sensors and actuators. In addition, modular machine designs often require intermediate connections with multi-pin ...
B&R Industrie-Elektronik
6 digital inputs (+24 V DC/3.5 mA) Input delay: 1 µs 8 digital short circuit proof outputs (+24 V DC/0.5 A/backreadable) 1 analog input (±10 V DC/16 bits) 1 analog current input (0-20 mA resp. 4-20 ...
SIGMATEK GmbH & Co KG
... gathering and processing machine data on site. HIGHLIGHTS Maximum on flexibility with more than 50 available digital and analog I/O modules Standard and light network adapter ...
Hitachi Europe GmbH
... CPSN-MCB271-S1-041 model only I/O module expansion With this product, you can freely add I/O modules to match the necessary functions from among the varied ...
CONTEC
Digital input/output mixed module 8 digital inputs, 8 digital outputs 24 VDC Sink/Source input option with 2 isolated groups, source outputs with 1 isolated ...
... Power supply via FDnet/C-NET in potential-free mode. Monitored mode requires additional DC 24 V power supply. Input/output module incl. 3 resistors and 2 mounting feet for TS35 U-rail. Operating temperature -25…70 ...
Siemens Fire Safety
... designed to expand the digital and analog I/O of ABB’s Relion® series protection relays, provide I/O for the station automation device COM600 using IEC 61850 communication and Grid Automation ...
... Fully-isolated I/O Application Flexibility •Handles diverse I/O configurations including analog 4-20 mA, 0-5 V or 0-10 V and digital 5-36 VDC •Long range wireless communication up ...
... line fault monitoring, LED fault and status display for each channel and SIL2 shutdown input Module in Zone 2 and Class I, Div. 2 can be replaced during operation (hot swap) Functional ...
R. STAHL AG
... communication module. Devicenet Subnet allows an additional 256 I/O per node, 63 nodes maximum, and third party DeviceNet modules can also be used. SXG and diagnostic electronic ...
Parker Pneumatic Division Europe
... PCM-UIO96C-16 is a highly versatile PC/104 input/output module providing 96 lines of digital I/O. One important feature of this card is its ability to monitor 48 of the 96 lines for both ...
Dedicated I/O expansion modules Various models available to I/O requirements Communications via CAN with Centurion™ controller Type J or K Thermocouples or 100Ω Pt 3-wire RTD temperature ...
... Adapter functionality and the safety module implements the CIP safety layer and safe control of three dual-channel inputs as well as one dual-channel output. The module's very compact size and flexible ...
IXXAT Automation
... supports 2 I/O modules only (not expandable) -Secure easy-to-use module mounting -Hot Plug-in of I/O modules -Automatic I/O module ...
Omniflex
Please specify:
Help us improve:
remaining