Digital I/O modules

... For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet. Type - +24 V DC Input voltage - +24 V DC (+18-30 V DC) Input current - 3.5 mA at +24 V Input delay - typically 1 µs Type - +24 ...

... Unit that converts 1 CH of IO-Link ports in IO-Link Master to 16-point of digital I/O Expandable I/O up to 256 (16 x 16) points by connecting to IO-Link Master UR Series. Digital input is Sink(NPN) / Source(PNP), all terminals are switched at once. Digital ...

... The digital I/Os are optimized for fast detection of digital signals and switching of actuators. They can be operated directly on a controller or remotely via a bus coupler. The modules are available in various granularities for inputs and outputs. ...

... Host Interface Ethernet # of Ports 4/4 Brand/Family eI/O Digital I/O Isolated Inputs, Form C Relay Outputs RoHS Yes Number of Inputs/Outputs 4 Inputs, 4 Outputs Power Requirement 9-30 VDC @ 5W Input Range 5-30 VDC Input Isolation 2500 VAC RMS, 3500 VDC Input ...

To transform Revolution Pi into an industrial control unit, various digital I/O modules can be connected to the base module RevPi Core. The I/O modules come in three versions. All have the same 28-pin I/O connector at the front (connector with two rows ...

... Dedicated I/O expansion modules Various models available to I/O requirements Communications via CAN with Centurion™ controller Type J or K Thermocouples or 100Ω Pt 3-wire RTD temperature measurement B+ or B- Digital inputs Low Voltage Digital outputs ...

... Voltage, current, resistance, potentiometer, RTD, thermocouple, strain gage (full-, half-, and quarter-bridge configuration), IEPE High-accuracy digitization 24-bit ADC, 100 kHz sample rate per channel Status, trigger, tare, alarm, command Signal ...

The PCM-UIO96C-16 is a highly versatile PC/104 input/output module providing 96 lines of digital I/O. One important feature of this card is its ability to monitor 48 of the 96 lines for both rising and falling digital edge transitions, latch them, and ...

... The Ixxat Safe T100/CS offers device manufacturers an easy way to control safe I/O signals using a safe fieldbus protocol. The module meets the SIL3 safety requirement level as defined by IEC 61508 and Performance Level PLe / Category 4 in ISO 13849-1. Safe ...

... -Wall mounting -Base supports 2 I/O modules only (not expandable) -Secure easy-to-use module mounting -Hot Plug-in of I/O modules -Automatic I/O module identification and scanning -Optional module keying Maxiflex 2I/O Master Base for PSU, CPU ...

The 905U and 805U simply and reliably communicate transducer and switch data by providing a 4-20mA, mV and digital interface in a small footprint radio. The sensor data is transmitted to a remote output as digital and 4-20mA effectively replacing the ...

... CEDIO-P 24/24/2 With 48 digital I/O and 2 analog outputs on board it is the controller with highest I/O packing density. ...

... Product overview
High connectivity, openness and configurability. The new generation of ESA I/Os is engineered to promote efficiency and digitization in accordance with Industry 4.0 and IoT. The ideal solution for distributed control of device ...

... The SNAP-PAC-RCK4 mounts one SNAP PAC brain or on-the-rack controller and up to 4 analog, digital, serial, and special-purpose SNAP I/O modules. The SNAP-PAC-RCK4 can be DIN-rail or panel mounted. This rack works with all SNAP I/O modules on the Opto ...

The SPC-SDIO-S0808SPK is an intelligent distributed IO module designed by SonnePower for industrial and vehicle control applications. With 8 flexible I/O channels, a CAN bus interface supporting CANopen, and built-in voice alarm functionality, this smart ...

Modular CsCAN remote I/O platform with seamless integration, functionality, and low cost in mind. OCS-I/O is a modular I/O system for OCS offering a fieldbus network (CsCAN). It is a flexible I/O system that can be applied as a local expansion I/O or ...

The BACnet I/O modules allow digital and analogue input values to be connected using the BACnet communication protocol. MS/TP (Master/Slave Token-Passing) based on the RS485 standard is used here. This allows a total bus length of 1,200m per segment with ...

FD-16M Modbus Modular I / O module has designed from a different perspective to automation systems. The FD-16M hardware modular design allows you to solve both your systems in a cost-effective way and to design them in such a way that there are no spare ...

The module offers 32 channels. Of these, 17 are configured as digital outputs by default. Up to 3 option cards with 5 channels each can be used to add digital inputs and outputs. The digital input signals can be further processed in the JUMO variTRON ...

CAN-IO module CIO is a versatile I/O module for the CAN bus. Designed for industrial series applications it has a robust and cost efficient layout. CIO supports eight digital 24 V / 500 mA output and eight analog input channels. The inputs are split in ...

Interra Ethernet I/O module is a versatile device that allows a variety of configurations and provides cost-efficient automation for smart home applications. The Ethernet module is intended to cover several automation requirements in a smart building ...

... GF 30 % Polyamid 8(12)~32 VDC -40°C … +80°C 24 Pin Connector USB2CAN Interface for Configuring Device Up to 19 Digital Inputs Up to 2 Frequency Inputs Up to 16 Analog Inputs Up to 2 Current Inputs Up to 4 Resistive Inputs Up to 19 Low-Side Outputs ...

Acquisition and actuation module, usable as extension for operator panels with integrated logic ( ATR313, TD329, TD240) or SCADA software. In a standard container DIN43880 9 modules for rail mountain, there are 4 controllers with universal input and a ...

The TRS67 modules are EtherCAT slave devices, available in plastic or metal, waterproof and dustproof, compliant with the international standard IEC 60529. Depending on the model, each connector contains digital inputs or outputs and/or a connection to ...

... The modular high-performance system is optimized for textile dyeing and finishing machines automation. It can be equipped with CANopen®, PROFIBUS DP® and Modbus RTU interface. One gateway contains up to 6 IO-boards in an aluminum rail housing. Features ...