Digital I/O modules

... Voltage, current, resistance, potentiometer, RTD, thermocouple, strain gage (full-, half-, and quarter-bridge configuration), IEPE High-accuracy digitization 24-bit ADC, 100 kHz sample rate per channel Status, trigger, tare, alarm, command Signal ...

The PCM-UIO96C-16 is a highly versatile PC/104 input/output module providing 96 lines of digital I/O. One important feature of this card is its ability to monitor 48 of the 96 lines for both rising and falling digital edge transitions, latch them, and ...

... -Wall mounting -Base supports 2 I/O modules only (not expandable) -Secure easy-to-use module mounting -Hot Plug-in of I/O modules -Automatic I/O module identification and scanning -Optional module keying Maxiflex 2I/O Master Base for PSU, CPU ...

The 905U and 805U simply and reliably communicate transducer and switch data by providing a 4-20mA, mV and digital interface in a small footprint radio. The sensor data is transmitted to a remote output as digital and 4-20mA effectively replacing the ...

... CEDIO-P 24/24/2 With 48 digital I/O and 2 analog outputs on board it is the controller with highest I/O packing density. ...

... Overview
DomBus32 is a DIN-RAIL module (54 mm wide) with 3 relay outputs, 3 AC inputs and 5 programmable low-voltage I/Os. Available in two firmware/protocol variants: proprietary DomBus protocol (multi-master with DCMD commands and Domoticz ...

... Overview
The iUSB modules are compact, industrial-grade intelligent I/O systems for measurement, control, regulation and monitoring tasks. Typical applications include industrial automation, laboratory and test automation, process control (MSR), ...

The SPiiPlus IOMnt-32-32 (Network Inputs and Outputs Module) is an EtherCAT digital I/O module with 32 inputs and 32 outputs. The input voltage is 24Vdc

The IOM-CH16 Digital I/O Module can acquire the status of 16-channel digital inputs, or 8-channel digital inputs and 4-channel relay outputs, or 12-channel high-voltage digital inputs, or 8-channel relay outputs. It also supports remote data acquisition ...

... Product overview
High connectivity, openness and configurability. The new generation of ESA I/Os is engineered to promote efficiency and digitization in accordance with Industry 4.0 and IoT. The ideal solution for distributed control of device ...

... The SNAP-PAC-RCK4 mounts one SNAP PAC brain or on-the-rack controller and up to 4 analog, digital, serial, and special-purpose SNAP I/O modules. The SNAP-PAC-RCK4 can be DIN-rail or panel mounted. This rack works with all SNAP I/O modules on the Opto ...

The SPC-SDIO-S0808SPK is an intelligent distributed IO module designed by SonnePower for industrial and vehicle control applications. With 8 flexible I/O channels, a CAN bus interface supporting CANopen, and built-in voice alarm functionality, this smart ...

Modular CsCAN remote I/O platform with seamless integration, functionality, and low cost in mind. OCS-I/O is a modular I/O system for OCS offering a fieldbus network (CsCAN). It is a flexible I/O system that can be applied as a local expansion I/O or ...

The BACnet I/O modules allow digital and analogue input values to be connected using the BACnet communication protocol. MS/TP (Master/Slave Token-Passing) based on the RS485 standard is used here. This allows a total bus length of 1,200m per segment with ...

FD-16M Modbus Modular I / O module has designed from a different perspective to automation systems. The FD-16M hardware modular design allows you to solve both your systems in a cost-effective way and to design them in such a way that there are no spare ...

CAN-IO module CIO is a versatile I/O module for the CAN bus. Designed for industrial series applications it has a robust and cost efficient layout. CIO supports eight digital 24 V / 500 mA output and eight analog input channels. The inputs are split in ...

Interra Ethernet I/O module is a versatile device that allows a variety of configurations and provides cost-efficient automation for smart home applications. The Ethernet module is intended to cover several automation requirements in a smart building ...

... GF 30 % Polyamid 8(12)~32 VDC -40°C … +80°C 24 Pin Connector USB2CAN Interface for Configuring Device Up to 19 Digital Inputs Up to 2 Frequency Inputs Up to 16 Analog Inputs Up to 2 Current Inputs Up to 4 Resistive Inputs Up to 19 Low-Side Outputs ...

Acquisition and actuation module, usable as extension for operator panels with integrated logic ( ATR313, TD329, TD240) or SCADA software. In a standard container DIN43880 9 modules for rail mountain, there are 4 controllers with universal input and a ...

The TRS67 modules are EtherCAT slave devices, available in plastic or metal, waterproof and dustproof, compliant with the international standard IEC 60529. Depending on the model, each connector contains digital inputs or outputs and/or a connection to ...

... The modular high-performance system is optimized for textile dyeing and finishing machines automation. It can be equipped with CANopen®, PROFIBUS DP® and Modbus RTU interface. One gateway contains up to 6 IO-boards in an aluminum rail housing. Features ...

... The PLC TPLC050 has a modular and flexible structure based on ARM9. The inputs and outputs of the TPLC050 are expandable by adding Mect MPNC030 and MPNC035 series modules for analog signals and MPNC020 for digital signals. The analog and digital I/O ...

... 1 stop-function / current 5 A / short-circuit protected »Listen before talk«-technology mit automatic frequency management for higher operational safety or frequency hopping for USA and Canada Several systems can be operated at the same ...

PROFINET is an open industrial Ethernet communication protocol, designed to collect and transmit data in industrial systems, and can realize real-time data transmission and reception. It is a real-time industrial Ethernet. Since profinet is based on Ethernet, ...

... Modbus-TCP Comunications allow the extention of the system through a Prometheus2 I/O unit, An integrated Web Server extends the use of the user interface through network . Extra interfaces include CAN Bus communications (Inverters, extra I/O). Prometheus2 ...

The 12 Inputs, 8 Analog and 1 Relay Outputs CAN I/O Module can extend machine control networks by adding I/O to the CAN bus. The controller features 1 Isolated CAN port for user-defined communications over the bus. It accepts up to 10 analog (0-5 V, 0-10 ...

... MI03XX IS AN I/O EXPANSION MODULE, CAN INTERFACE, USING CANOPEN COMMUNICATION, SUPPORTING 8 RELAY OUTPUTS AND 8 SWITCHING INPUTS. This product can easily and reliably collect the switching quantity and control the relay. Dimensions WxHxD (mm) 146 ...

... Small footprint for easy installation inside the side-frame High flexibility to fit in all applications Fully compatible with all ConveyLinx High communication speed Real time applications Error-free comissioning ...

... These boards require BRD.019.025 - max 8 modules x node Part code BRD.007.454 16 digital outputs (24 Vdc) protected against short-circuits and overload, max 1A. Part code BRD.007.458 16 digital inputs (24 Vdc) protected against reversal, with 10 msec ...

... Connect your components quickly and easily using adio connection in the field and link your systems with our newest and wifi-enabled I / O module SPACE. The Wifi-capable control module Space with integrated antenna enables wireless networking of individual ...

With an IP65 rating and up to 2A through each of the 18 outputs, the EtherCAT® I/O Box is suitable for almost all applications. Inbuilt diagnostics detect broken cables, short circuits and overcurrent’s quickly with onboard diagnostic functions and features. ...

The USB-DIO96H Series of USB digital devices provide a higher channel count than other digital devices. Each device provides high current, logic-level, bidirectional digital I/O and counter operation, and is designed with a heavy-duty chassis for rugged ...

The xtremeBLOCK CANopen module combines many different I/O signal configurations. It offers a total of 12 inputs, eight of which can be parameterized as analog. The remaining four digital inputs can also be configured as frequency inputs or counters. ...

To expand the I/O capability of certain RTCU products an MODBUS compatible I/O module can be connected to the product and configured using the I/O Expansion configuration functionality available in the RTCU IDE. The I/O Expansion is completely transparent ...

... M12 interface、multi-protocol bus module、16DI/DO configurable、PNP、007E31 > Integrated four Ethernet interfaces: PROFINET, Ethernet/IP, CC-Link IEF Basic、Modbus TCP > 8 ports 16 signals > Input/output configurable > Protection level: IP67 (when installed ...

... Combined module of digital inputs and outputs with an NPN open collector and a relay. The integrated power supply has enough power even for additional modules on the bus. 8x digital input 4x analogie output, 0…2/5/10/±10 V, 0…5 mA, 0/4…20 ...

... FSoE slave module for safe speed and position of one axis for further evaluation in an FSoE master unit. 14 safe digital inputs Up to 4 safe digital outputs 2 Encoder interfaces 2 Relay / clock outputs 2 Auxiliary outputs ...

... 8 inputs / 8 transistor outputs Easy connection to the SPEEDY extension port ...

The DINDxx facilitates the reporting of the status of up to 8 dry contacts or up to 8 pulse counter indices. It also allows to remotely control industrial equipments and to check their proper functioning. The readings are regularly transmitted on Sigfox ...

... I/O acquisition modules with 16 inputs / outputs: NXT-D16 NXT-D16 is a remote I/O acquisition module and it is compatible with ModBus RTU (RS485) and ModBus TCP (Ethernet) protocols. Versatile digital IO module equipped with ModBus and CANBus for ...