Digital I/O modules

GW1-ETH-WQ-EU is an Ethernet gateway that converts Ethernet into wireless in the Sub-1GHz band. Data from the wireless I/O series terminal (Slave) can be sent to a PC via Ethernet, or received data from computers can be sent via Ethernet.With ...

Overview / Features This product is an IO-Link ｍaster with 8 channels of IO-Link port (Class A). It supports industrial Ethernet protocols of differing makers and can connect to the net-work of PROFINET, EtherNet/IP, Modbus TCP, and ...

New Remote I/O modules with Hight-functional Firmware Configurable Type in the CONPROSYS M2M series Easily connect modules using the stack method. Users are able to combine I/O modules freely and connect them to the CPU module in ...

I/O module IO20 with bus interface Profile IO20: IO module for evaluating digital sensors and controlling actuators Output of system information of ETC5000 SIKONETZ5 interface 8 digital inputs 8 digital outputs ...

For the simple connection of binary sensors to any IO-Link master Data and energy transmission also possible with unscreened connection cable Clearly visible LEDs for displaying operation, switching status and error Robust ...

Very safe mounting and high protection rating Digital inputs and outputs Fast detection and processing of analogue inputs Toolless mounting Three freely selectable directions of the flat cable

2 times 2 digital inputs for switching status and 2 outputs supplied from AS-i Four digital inputs for switching status and four inputs for function check Four analogue inputs, four analogue outputs or 4 Pt100 channels selectable ...

The CDF600-2 Profibus fieldbus module is an easy-to-use unit that integrates identification sensors in PROFIBUS-DP networks ideal for handling and warehousing systems, consumer goods and automotive industries. It comes with a refined ...

I/O modules PSS67 for the automation system PSS 4000 Compact modules with IP67 protection are now available, the PSS67 IO1 16FDI with SafetyNET p. Thanks to the fully encapsulated module electronics, the IP67 modules are particularly ...

Combine freely for your application A selection of I/O modules for safety-related and non-safety-related digital signal processing is available for the remote I/O system PSSuniversal 2. You can configure the system to fit your requirements, ...

In combination with our existing PLC and HMI PLC products, the XN300 I/O system provides an ideal system solution for machine building applications meant for mass production environments. Our CODESYS programming software and Galileo visualization ...

The SmarWire-DT connection is well known for its flexibility. This highly remarkable connection technology permits installation at any location in the control panel. One of the best features of this great technology is situating the input/output ...

I/O modules IP67 for connection of digital and analog inputs/outputs to the SmartWire-DT network The I/O Modules IP67 are available in two housing variants: T-Connector for connection of 1…4 sensors / actuators and Blockmodule with ...

The MELSEC ST series is an universal solution for distributed automation systems. Its modular architecture makes MELSEC ST exceptionally flexible, so that it can be configured precisely for any application. MELSEC ST is Mitsubishi's ...

AS-i Slave 4 digital input PNP Status display of inputs via LED AS-i status display Via AS-i cable connectable Connectors M12

With Ethernet IO modules from Pepperl+Fuchs, field devices are easily connected to a higher-level bus system. The modules support all common Ethernet communication protocols, and you can easily set the desired type using the rotary selector ...

The world’s smallest AS-Interface module with IP68/IP69K protection needs no more than 8 cm³ for each I/O. The one-piece enclosure mounts quickly and securely using a single stainless steel screw. Just 20 mm high, it easily fits in cable ...

The KE modules series offers a maximum of 4 inputs and 4 outputs on a device only 22.5 mm wide, saving space on the DIN mounting rail in the control cabinet. Colored removable terminals and labeling make connection safe and easy.

The EH-RIO2 series of Remote I/O modules allows you the flexibility to distribute I/O throughout your application. Using EH-RIO2, you can precisely plan and expand your I/O and locate them right where they are needed: close to the sensors and actors.

This product is a data acquisition module and transmitter with built-in alarms. Some of the product's most notable features include an RS 485 Modbus RTU and a digital input for PV hold. It comes complete with a universal output and analogue ...

This uses two wires for eight digital I/O. It has six inputs and two outputs with many functions plus two frequency inputs and an RS 485 Modbus RTU. It also uses outputs with not and hold functions.

The DIN Rail mounting offers two isolated inputs. It has two independent channels acquisition module and four freely addressable outputs.

CC-Link is a standardized fieldbus designed to integrate the most diverse automation components of a wide range of providers. CC-Link is already the principle fieldbus technology used in Asia. The open network is supported by the CC-Link ...

We have developed highly functional and practical fieldbus modules for the perfect connection of I/O systems to the open, deterministic high-speed network CC-Link IE/Field. This new generation outshines everything before it with its excellent ...

The BNI0001 Devicenet module has 16 PNP, type 2 inputs, 8 plug-in positions and does not allow input/output configuration. It has an enclosure that conforms to the IP67 standards when connected and is CE approved. It had LED indicators ...

For factory automation we offer compact fieldbus I/O-modules for PROFIBUS-DP, DeviceNet™, CANopen, INTERBUS, AS-interface®, Modbus TCP, Ethernet/IP™ and PROFINET. The IP67-modules for use in harsh environments have glass-fiber reinforced ...

For safety-related applications, we offer IP67 block I/O modules with safe digital inputs and universal digital channels that can be used as inputs or outputs. The modules also feature non-secure universal digital channels and IO-Link ...

Rear I/O module for CP3923 - Managed Layer2/Layer3 3U CompactPCI Switch Specifications 3U, 8HP RTM Eight Gigabit Ethernet ports via RJ45 Managment either via RS232 serial interface or Gigabit Ethernet The CP-RIO3-923 is a ...

- 12-ch DI, 6-ch DO, Ethernet-based smart I/O - Remote monitoring and control with mobile devices - Group configuration capability for multiple module setup - Flexible user-defined Modbus address - Intelligent control ...

Advantech's new generation of remote I/O & sensing devices bring an IT oriented spirit to the market. With the advanced concepts of data A-P-P, data Acquisition, data Processing to data Publishing, fulfilling mobile monitoring and controlling ...

- USB 3.0 SuperSpeed - Daisy chainable by built in USB hub - 16-ch digital input and 16-ch digital output with 2,500 VDC isolation - Wide input voltage range (10 ~ 30 VDC) - Wide output voltage range (5 ~ 40 VDC) and ...

16 freely selectable input and output pins 2 Industrial Ethernet ports 8 digital I/O ports High protection class IP67 Rugged aluminium housing This connection allows simple connecting of up to 16 PNP sensors ...

Pulses delivered independently to eight isolated binary inputs are counted by the SLI-8 multi-counter module. It is 24bit long and can be cleared or read by the operator at any time. The LEDs signaling the occurrence of high states on ...

Multi I/O is a device that integrates UPS into a control system using fully configurable input and output relay signals. It can be used to connect two devices to a single UPS serial communication port. It can be used anywhere where ...

he USB digital I/O card allows you to add serial interfaces to embedded systems by Syslogic or third parties. The USB I/O digital card is equipped with four inputs and four outputs (current sinking/current sourcing). They are made available ...

The digital IOs are optimized for fast detection of digital signals and switching of actuators and can be operated directly on a control or decentralized via a bus coupler. Modules are available with a granularity of 8 and 16 for inputs ...

The IM 270/W is a cost- and space-saving compact module. It combines the typical I/O design for plastic injection molding machines in one module and offers functions for changeover point detection. In addition to application in the plastics ...

The KeConnect communication modules enable customized communication to a wide range of communication partners through back-to-back modules and plug-in cards. Simple wiring is ensured through standard plugs. Support of a wide range ...

Kuhnke's FIO is a system of I/O modules for interconnecting the process signals in an EtherCAT network. It consists of the bus coupler and a range of I/O modules. The bus coupler converts the physical transfer technology (twisted pair) ...

The Kuhnke FIO relay module from Kendrion has 8 relays with separated contacts. The relay contact is available for voltages up to 24 V AC or DC and can be used universally for switching devices requiring mains power. The relay output ...

The Kuhnke FIO is a Bus Terminal EtherCAT® designed to connect the operation signals within the EtherCAT network. It comprises of different I/O modules and a bus coupler. The Kuhnke FIO bus coupler changes the transmission physics from ...

With 4 test outputs for sensor tracking operations, 2 programmable control outputs, and 2 pair of safe transistor outputs (PNP)/400 mA, elobau's eloProg Input/Output Module enhances the test outputs and control inputs of the base module. ...

Elobau field bus module Profibus DP ,with a transmission rate of 12MBit/s, can be easily connected to the base via a T connector with an optional station address from 0…125 via bus configurator. It flashes a LED display to show the status ...

The Elobau 485EPFDN is a DeviceNet DN fieldbus module that can exhibit a transmission rate of 125kBit/s, 250kBit/s, and 500kBit/s. This device allows direct connection to the PLC as well as various configuration made by the bus configurator. ...

The PCD1 E-Line I/O modules enable centralised automation in the control cabinet and the decentralised distribution of the components through the bus connection. They can be commissioned quickly using the implemented override operation. Types - ...

The modules in the Saia PCD1.E-Line S-Series for HVAC applications have a mix of analogue and digital inputs and outputs. With 6 to 12 data points per module, they can be combined easily and are an economical addition to the L-Series. ...

The ARD Series comprises of remote I/O module. It is integrated with different functions including its automatic communication speed identification and network voltage monitoring duties. A noise resistance and an extensive dependability ...

Modbus RTU Digital Remote I/O (Sensor Connector Type) The ARM series digital remote I/O units provide input and output expansion for PCs, PLCs, and Autonics logic panels using standard Modbus RTU protocols. The sensor connector type ...

4-input impulse centralising equipment. Inputs are optoisolated to read impulses and it has a 32-bit memory to store the values metered. - It has an RS-485 communications port that can be used with an RS-232 or Ethernet converter ...