TURCK IP I/O modules
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
... Glass fiber reinforced housing Shock and vibration tested Fully potted module electronics Protection classes IP65, IP67, IP69K M12, ...
TURCK
... potted module electronics Protection classes IP65, IP67, IP69K M12, 5-pin, L-coded male connector for power supply Galvanically isolated voltage ...
TURCK
... vibration tested Fully potted module electronics Protection classes IP65, IP67, IP69K 4-pin M8 male connector for power supply Galvanically ...
TURCK
... resistance due to full potting Sensor and actuator supply also possible with external voltage Reliable detection and display of peripheral and communication faults Addressing via infrared interface ...
ifm electronic
For the simple connection of binary sensors to any IO-Link master Data and energy transmission also possible with unscreened connection cable Clearly visible LEDs for displaying operation, switching status and ...
ifm electronic
Very safe mounting and high protection rating Digital inputs and outputs Fast detection and processing of analogue inputs Toolless mounting Three freely selectable directions of the flat cable
ifm electronic
... Discrete input/output can be independently configured as NPN or PNP R95C IO-Link Hubs are a quick, easy, and economical way to integrate non-IO-Link discrete and analog devices into an IO-Link ...
... series connection of up to 32 sensors regardless of the manufacturer Up to 100 m in cable length between the sensors IP65 and IP67 enclosure rating Integration via M12 standard cable Individual monitoring ...
Our Bulletin 1732 ArmorBlock® Guard I/O™ modules provide all the advantages of traditional distributed I/O for safety systems. These modules are available in an IP67-rated ...
... PLC-based applications, two other modules are available for use in cloud-based and hybrid systems: the ICE2 (EtherNet/IP) and ICE3 (PROFINET) IO-Link master series. These support the ...
The world’s smallest AS-Interface module with IP68/IP69K protection needs no more than 8 cm³ for each I/O. The one-piece enclosure mounts quickly and securely using a ...
... programmable relay outputs • Approved according to EN54-17 and EN54-18 • VdS Approval: G218074 • CPR: 0786-CPR-21579 • Operating temperature: - 10 to +50 °C • Ambient humidity: < 95% • Dimensions: 110x110x49 mm • ...
Panasonic Eco Solutions
Our Bulletin 1732 ArmorBlock® Guard I/O™ modules provide all the advantages of traditional distributed I/O for safety systems. These modules are available in an IP67-rated ...
Compact modules with IP67 protection are now available, the PSS67 IO1 16FDI with SafetyNET p. Thanks to the fully encapsulated module electronics, the IP67 ...
With the PDP67 modules, Pilz offers solutions for decentralised applications directly in the field. Protection type IP67 means that the modules are resistant to dirt and water. The decentralised ...
... standard I/O) to industrial networking protocols (EtherCAT, EtherNET/IP, PROFINET). The devices also offer enhanced durability with IP67 and IP69K protection rating.
The PT series 5-pin M12 connector sensor distribution boxes offer flexibility for installing multiple sensors in various applications. With 4, 6, and 8 ports, the distribution boxes can supply power and receive signals for sensors using ...
Cost-optimized CANopen-slave-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication of the master control unit takes place via CANopen or a layer 2 protocol. The ESX.iox ...
The ESX.3ios is a CAN-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication with the master control unit takes place via CANopen, CANopen Safety, the STW ...
... bridge, and one digital output are supplied via a safety relay (max. 15 A per safety relay). The module also possesses four multifunction inputs, one module identification output, one digital output and ...
... protocol module and I/O module plug and play, features as below: 1. designed with a max of 64 modules, each I/O module is built with ...
ODOT Automation
... period of 250us.The adapter supports a maximum input of 1440 bytes, a maximum output of 1440 bytes, and 32 pcs of extended IO modules. Hardware Specification System Power: Nominal: 24Vdc, Range: ...
ODOT Automation
The CN-8033 EtherCAT I/O module supports standard EtherCAT protocol access. The adapter supports a Max. input of 1024 bytes and a Max. output of 1024 bytes. It supports 32 pcs of extended IO ...
ODOT Automation
SmartMod+ expandable I/O supporting Modbus TCP/IP communication protocol. Modbus TCP/IP -Traditional slice type I/O -Connects to Ethernet via RJ45 to any ...
... : Modbus TCP/IP, CANopen and Modbus RTU. SmartMod+ can cost effectively provide additional points of I/O to any solution and is a great choice for expanding X-Series OCS when one or more digital or analogue ...
... : Modbus TCP/IP, CANopen and Modbus RTU. SmartMod+ can cost effectively provide additional points of I/O to any solution and is a great choice for expanding X-Series OCS when one or more digital or analogue ...
... is an I/O module with 4 digital inputs, 2 analog inputs, and 2 digital relay outputs, for slave communication over ModbusTCP-IP (Ethernet) and Modbus RTU. The module ...
... case of failure of a module in the chain. Max power consumption - 3 W Insulation - 1.5 kVac Status indicators - Power supply Input/Output status STS (IP address / DHCP) Profinet IO ...
The xtremeDB -1 (pronounced: "dash one") CANopen module combines many different I/O signal configurations. It offers a total of eight inputs, up to four of which can be parameterized in analog mode. Two ...
... the same time, the module offers 14 digital outputs, most of which can be configured as PWM or PWM(i). The maximum output current of 7 A is sufficient to control even actuators with high power. Fully potted IP69K ...
Our comment on "xtremeDB 8 inputs 8 outputs, SAE J1939" The xtremeDB -1 (pronounced: "dash one") SAE J1939 module combines many different I/O signal configurations. It offers a total of eight inputs, ...
GF 30% Polyamid 8(12)-32 VDC 1S Li-on Battery -40C +80C 1x IMU Sensor Up to 1 Frequency Input Up to 4 Current Inputs Up to 4 Resistive Inputs Up to 4 High-Side Outputs Up to 4 Low-Side Outputs Up to 1 Analog Output Up to 2 ...
Makersan
GF 30% Polyamid 8(12)-32 VDC 1S Li-on Battery -40C +80C 1x IMU Sensor Up to 1 Frequency Input Up to 4 Current Inputs Up to 4 Resistive Inputs Up to 4 High-Side Outputs Up to 4 Low-Side Outputs Up to 1 Analog Output Up to 2 ...
Makersan
GF 30% Polyamid 5(9)-12 VDC -40C +80C 1S Li-on Battery Up to 1 Frequency Input Up to 4 Current Inputs Up to 4 Resistive Inputs Up to 4 High-Side Outputs Up to 4 Low-Side Outputs Up to 1 Analog Output Up to 2 Solid State Relays
Makersan
>16DI/DO configurable >Support: Profinet, Ethernet/IP, EtherCAT, CC Link IEF Basic protocol fieldbus interface >Protection class: IP 67 (when correctly connected) >Shell material: Nickel plated Gd Zn alloy
Fuyansheng Electronic (Fujian) Co., Ltd.
>16DI/DO configurable >Support: Profinet, Ethernet/IP, EtherCAT, CC Link IEF Basic protocol fieldbus interface >Protection class: IP 67 (when correctly connected) >Shell material: Nickel plated Gd Zn alloy
Fuyansheng Electronic (Fujian) Co., Ltd.
> 16DO >Support: Profinet, Ethernet/IP, EtherCAT, CC Link IEF Basic protocol fieldbus interface >Protection class: IP 67 (when correctly connected) >Shell material: Nickel plated Gd Zn alloy
Fuyansheng Electronic (Fujian) Co., Ltd.
The Modbus module in an IP65 housing with 4 digital inputs and 2 relay outputs was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window ...
METZ CONNECT
The BACnet MS/TP module in IP65 housing with 4 digital inputs and 2 relay outputs with manual control was developed for decentralized switching tasks. It is suitable for accommodating, for example, light ...
METZ CONNECT
The I/O module in IP65 housing with 4 digital inputs and 2 relay outputs is developed for decentralized switching tasks. Suitable, for example, to accommodate light switches and window ...
METZ CONNECT
ASi Digital I/O Module EXTREME Product Line in IP67, with 8 x M12 sockets, 4 digital inputs, 4 digital outputs, Y wiring, input voltage/sensor supply out of ASi, output voltage/actuator ...
Bihl+Wiedemann GmbH
... 50155 qualified input / output modules make it possible to build complete train control control (TCMS) architectures. These acquisition and control modules are based on a generic platform: the “Basic ...
... continuity in environments typical of industrial applications with power constraints. 905U-K Wireless I/O The ELPRO 905U-K Wireless I/O is a small I/O transmitter that extends long ...
... FSU, MRP EtherNet/IP according to CIP Edition V3.11, EIP adaption of CIP V1.12, DLR, Quick Connect EtherCAT I/O according to ETG.1000 V1.2, auto-increment and fixed addressing, CoE, EoE, FoE IP-rated ...
... type of module): - Housing: PBT or PUR, Metal - Inserts: PA - Contacts: CuZn, pre-nickeled and gold plated Protection class: IP67 Nominal current at 40°C: 0.5 A to 2 A per channel and up to 15 A ...
... suite of 17 E3 I/O modules offer up to 34 mixed I/O points to meet varying requirements. Add high-density I/O to our award-winning Graphite® HMIs or deploy in remote ...
Red Lion's Sixnet series EtherTRAK®-2 Ethernet enabled I/O modules provide simple and secure remote monitoring for deployments in harsh environments. EtherTRAK-2 offers a low cost per I/O ...
... developed for the direct acquisition and calculation of I/O signals close to the test object in the harsh industrial environment and has a robust normed metal housing with the degree of protection IP ...
... inputs/outputs (24 V). It is intended for multidimensional measurement in harsh industrial environments. The system has a robust IP 65 housing as well as numerous protection circuits. It is designed for an operating temperature ...
... directly at the sensor in the harsh industrial environment. It has a robust normed metal housing with the degree of protection IP 65 and an extended temperature range from -40°C to +85°C. The ARM®9 32-bit processor allows ...
... indicators. Different module versions support nominal vehicle battery voltages from 24Vdc to 110Vdc. It is designed for the harsh traction environment (-40°C to 70°C) and tested against EN 50155 / EN 50121. FEATURES TCP/IP, ...
... indication of OK and reset is shown via LEDs on the front panel. Compact and Cost Saving All I/O functions are located on one board and provided via one rugged I/O connector. This lowers the number ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining