Flow: 0.6 m³/h - 158.9 m³/h
Pressure: 0 bar - 16 bar
Fluid temperature: -10 °C - 140 °C
... designed lobes. The pump is authorized to carry 3-A symbol. Note: Consult the options of the pumps authorized to carry 3-A symbol. The SLR pump is a bare shaft rotary lobe pump. ...
INOXPA
... This could even cause the pump to become completely blocked. To maintain the temperature of the chocolate and avoid it solidifying inside the pump we recommend fitting a heating jacket to the front ...
INOXPA
Flow: 115 m³/h
Pressure: 16 bar
Fluid temperature: -10 °C - 140 °C
The HLR pump is a hygienic rotary lobe pump designed in compliance with the EHEDG specifications for plants and processes that comply with the strictest hygienic requirements. Due to the low working speed, ...
INOXPA
KGL series servo screw platen pump realizes precise glue supply and metering of the system based on the technical principle of eccentric screw valve, and is suitable for various single and two-component glues from high ...
Flow: 0 l/min - 0.5 l/min
Pressure: 0 mbar - 500 mbar
Head: 17 mm
CMP-11G,mini gas pump,diaphragm micro pump are well suited for gas sampling, transferring, evacuating and compressing air and neutral or corrosive gases as well as vapors. Technical ...
ALLDOO Micropump | Micro Diaphragm Pumps
Flow: 0.1 l/min - 10 l/min
Pressure: 0.1 bar - 5 bar
Head: 17 mm - 40 mm
Custom Design and Manufacture Vacuum Gas Liquid and Brushless Miniature Pumps With Compact Size and Light Weight.
ALLDOO Micropump | Micro Diaphragm Pumps
Flow: 0.3 l/min
Pressure: 3, 4 bar
Head: 30 mm
CMP30L,micro water pump,mini membrane pump,liquid micro pumps are well suited for transferring and evacuating neutral or corrosive liquid as well as water with low flow ...
ALLDOO Micropump | Micro Diaphragm Pumps
Close-coupled Centrifugal Pump for sea water and hot spring Spec Type:Other Key Features Features: 1. Pump casing and impeller are made of highly reinforced plastic. The shaft is using SUS316 ...
Enfound enterprise co.,ltd
Flow: 36 m³/h
Pressure: 5 bar
Head: 25 m
Close-coupled Centrifugal Pump for sea water and hot spring Key Features Features: 1. Pump casing and impeller are made of highly reinforced plastic. The shaft is using SUS316 material. It is anti-corrosive, ...
Enfound enterprise co.,ltd
Flow: 0 l/min - 1,450 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 31 m
Close-coupled Self-priming Pumps Spec Type:Other Key Features Features: 1. Close-coupled design, small size, space-saver,high efficiency, easy maintenance. 2. ...
Enfound enterprise co.,ltd
CEMO
Crank pump for AdBlue® / DEF / ARLA 32 Order-number: 10517 Details Crank pump for AdBlue® / DEF / ARLA 32, antl-freeze, water -solid construction for professional operation -housing in stainless ...
CEMO
Flow: 70 l/min
... The standard containers are primed and painted. We offer a 10-year warranty against rusting thro Electric pump CUBE 70 MC50 - self-priming - pump flow rate approx. 70 l/min - electronic ...
CEMO
Flow: 30 m³/h
... , the CIP self-priming pump adopts acid-resisting stainless steel (AISI 316) in its valve body. This has a unique resistance to alkali and acid. The positive displacement pump ...
Flow: 40 l/h - 150,000 l/h
Pressure: 16 bar
Power: 2.2 kW - 90 kW
... feeding makes the seal at the Atmospheric pressre, keep the pump's seal ability at the high pressure. 3. High self susction ability．Self-priming down to a vacuum ...
Head: 60 mm - 260 mm
Power: 250, 120, 60, 180 W
... power (watt) : 60 • Weight (Kg) : 2 • Packaging (mm) : 25X25X30 • Draught (mm) : 60 The continuos service self-priming electric pumps are suitable for continuos coolant flow and ...
Flow: 3 m³/h - 40 m³/h
Head: 4.2 m - 18 m
Power: 0.37 kW - 2.2 kW
Technical data Construction Self-priming swimming pool pumps with built-in strainer and motor insulated from pumped water. The pump is made with high quality plastic ...
Calpeda
This high-powered, self-priming transfer pump achieves up to 200 gpm (757 lpm) and 58 psi (4.0 bar). The series includes 1542P-55SP, 1542P-65SP, 1542P-65ESP, 9342P-HM1C-5SP, and 9342P-HM5C-5SP. Key ...
Hypro Pressure Cleaning
Hydraulically-Driven Centrifugal Pumps, Cast Iron & Stainless Steel Self-Priming, 97 - 147 GPM This self-priming hydraulic motor driven pump achieves up to 98-122 gpm ...
Hypro Pressure Cleaning
... Stainless Steel Self-Priming Centrifugal Pumps, 140 GPM max Pentair Hypro self-priming centrifugal pumps handle big, high-capacity spraying jobs with ...
Hypro Pressure Cleaning
Pressure: 275 bar
Ideally suitable for the automatic grease lubrication of all types of industrial machines and as a chassis lubrication pump for trucks, trailers, buses, construction and mechanical handling vehicles. In conjunction with ...
I.L.C. srl
Flow: 42 l/min - 129 l/min
Pressure: 500, 400, 320 bar
Power: 0 kW - 75 kW
HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s
Hauhinco
Flow: 201, 167, 266, 221, 278 l/min
Pressure: 160, 210 bar
Power: 0 kW - 75 kW
HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s
Hauhinco
Flow: 103 l/min - 163 l/min
Pressure: 365, 575, 465 bar
Power: 0 kW - 110 kW
HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s
Hauhinco
Flow: 500 l/h
Head: 5.4 m
Power: 90 W
The Si 1805 is a centrifugal tank pump for air conditioning units & refrigerated display cabinets. Designed for discharging condensates from air conditioning and refrigeration systems.
Sauermann
Flow: 568 l/min
Head: 29 m
Fluid temperature: 149 °C
Compact close-coupled design Standard NEMA 56C motor Mechanical seal: 3/4″ Type 21 Buna, carbon vs. ceramic standard on cast iron pumps; 3/4″ Type 21 Fluorocarbon, ceramic vs. carbon is standard on ...
Price Pump
Flow: 400 l/min
Head: 32 m
Power: 0.18 kW - 3 kW
The MPN Pump Series is particularly suitable for crystallizing media (no air can get inside), toxic or environmentally hazardous media. A small amount of gas in the liquid can also be transferred without ...
Flow: 200 l/min
Head: 27 m
Power: 0.25 kW - 2.2 kW
The S Pump Series has a special pump housing with a collection container that serves as a liquid reservoir. After filling the liquid container, the pump creates a strong negative pressure ...
Pressure: 0 bar - 210 bar
... for example, self-controlling vane pumps This type of pump, first developed by Racine in 1925 (since 1988 by BOSCH / RACINE), has been further developed and continues to set new standards ...
Flow: 10,000 us gal/min
Head: 150'00"
Multi-stage Vertical Turbine Pumps with bronze impellers and cast iron bowls Lineshaft turbine pumps have above-ground discharge with water-lubricated line shaft bearings Column pipe coupling has bronze ...
Flow: 240 m³/h
Pressure: 32 bar
Head: 320 m
Vertical inline pumps are supplied with different material of construction suitable for high pressure application. The inline construction simplifies the piping work and major saving on floor space compare to other type ...
C.R.I. Pumps
Flow: 7 m³/h
Pressure: 7.6 bar
Head: 76 m
... multistage pumps are designed in single shaft construction which eliminates transmission losses between motor and pump. Major components of these pumps are made up of corrosive resistance ...
C.R.I. Pumps
Flow: 16,000 m³/h
Pressure: 25 bar
Head: 250 m
... turbine pumps are single stage or multistage in construction and submerged impellers allow the pump to be started without need of priming. VT pumps are designed to operate ...
C.R.I. Pumps
Application The TP pump is a pneumatically operated, single acting, piston pump. Discharge capacity is adjustable from 0.57cc to 1.1 cc per stroke. A high pressure ratio of 50:1, offers high outlet ...
Flow: 90 l/min - 440 l/min
Pressure: 0.4, 0.28, 0.33 MPa
Head: 0 m - 24 m
Chemically resistant self-priming magnetic drive pumps which can tolerate abnormal operation The SMX-F is a horizontal self-priming magnetic drive pump ...
IWAKI Europe GmbH
Flow: 90 l/min - 440 l/min
Head: 0 m - 25.5 m
Power: 0.37 kW - 4 kW
... system an exceptional self-priming duration of 90 seconds for up to 4 m can be achieved. Additionally no valves are required for the repeated self-priming process. Enhanced durability ...
IWAKI Europe GmbH
Flow: 0.038 l/min
Pressure: 2 bar
Power: 5.6 W
... injection. The sealed drive unit and control unit assure the water-/dust-proof of IP65. *Note: This pump is not completely water resistant. Protect the pump with a cover when installing it out of doors.
IWAKI Europe GmbH
The Macnaught 20L ATF Hand Pump is your reliable fluid transfer companion. This pump is equipped with an anti-drip aluminium nozzle, ensuring precision and cleanliness with every stroke. No more messy ...
Macnaught Pty Ltd
The Macnaught 60L ATF Hand Pump is your reliable fluid transfer companion. This pump is equipped with an anti-drip aluminium nozzle, ensuring precision and cleanliness with every stroke. No more messy ...
Macnaught Pty Ltd
Flow: 10 l/min
... within pump body Motor is protected by IP55 rating Supplied with connection cables and alligator clips Pump is suitable to use with Diesel, Kerosene and light oil with viscosity less than 500CST Package ...
Macnaught Pty Ltd
Flow: 5,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 0.7 kW
... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components • Polypropylene (Moplen) pump ...
OMG sas di Gibogini Stefano e C
Flow: 25,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 4 kW
... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components. • Polypropylene (Moplen) pump ...
OMG sas di Gibogini Stefano e C
Flow: 5,000 l/h
Pressure: 1.8 bar
Power: 0.7 kW
... bar): ca. 1,8-2 N.B. The filter pumps of the series CESE marked with the letter “M” are equipped with a magnetic entrainment pump, which is designed without mechanical seal. This constructional feature ...
OMG sas di Gibogini Stefano e C
Flow: 1,000 m³/h
Head: 120 m
Power: 250 kW
... plastic pumps Based on innovative strength and over 60 years of expertise in the use of thermoplastics, we have set a new milestone in the shape of a future-oriented, efficient and reliable pump system.It ...
ASV Stuebbe GmbH & Co. KG
Flow: 235 m³/h
Head: 68 m
Power: 30 kW
STÜBBE E-CLASS: entry-level model in the STÜBBE pump family horizontal, single-stage centrifugal chemical plastic pump with mechanical seal in monobloc design (not self-priming) efficient ...
ASV Stuebbe GmbH & Co. KG
Flow: 130 m³/h
Head: 42 m
Power: 11 kW
Horizontal single-stage spiral cased pump Shaft sealing through single or double acting mechanical seal Circulation, rinsing, quench or barrier medium depending on application Made of sturdy plastic components, ensuring ...
ASV Stuebbe GmbH & Co. KG
Flow: 12 m³/h
Power: 0.37, 0.25 kW
Weight: 8, 12 kg
The FL20C centrifugal pump is well known for its small size and high performance. Despite their small size, these pumps can provide flows up to 12 m3/h with good outcomes. FL20C pumps ...
... consisting of Water Pumps, Thermostats, Thermostat Kits, Switches & Sensors, Coolant Flanges and Radiator Caps. In the quest to reduce engine emissions, there is a growing trend among vehicle manufacturers to use Electric ...
Flow: 23 l/min
... Series •The pump head may be mounted at 90° increments on the motor to allow mounting asneeded. •Meets USCG 183.410 & ISO8846 Marine (Ignition Protection) Diesel Transfer Pump Flow rate: 6 USgallons/min ...
Please specify:
Help us improve:
remaining