- Machine-tools >
- Cutting Tool >
- 2-flute milling cutter >
- Walter
Walter 2-flute milling cutters
Diameter : 35 mm - 52 mm
Milling head suitable for insert shape: round Milling application: Circular milling Milling application: Ramping Spacing of the cutters: ...
Diameter : 2.5, 3, 2, 4 mm
Length: 1.75, 2.38, 1.57 in
90° Face Mill 12 mm Insert with 4 indexes .43" Depth of cut 32-63 Ra surface finishes when engaging the wiper (WEP) Insert corners: .015", .031", .062" R
Ingersoll Cutting Tools
Diameter : 0.1 mm - 12 mm
Length: 35 mm - 100 mm
... type with the shortest neck length has been added to the lineup. New coating TH3 for machining hardened steel Optimized flute shape for high-hardness steel machining Double face shape Features ...
MOLDINO Tool Engineering Europe GmbH
Diameter : 2 mm - 20 mm
Length: 50 mm - 104 mm
... and application Slotting: Ball Nose Side Milling/Shoulder Milling: Ball Nose 3D Profiling Corner Style: Ball Nose Helix Angle: 30° DIN number 6528 Tool Dimensions: Flute Configuration: ...
Kennametal
... quiet end milling. Designed for shoulder and slot milling, ramping, helical milling, and plunge milling. High rake angle and ground cutting edges ...
Diameter : 20 mm - 100 mm
... overlapping effect between all adjacent tool pockets, providing a fully effective cutter configuration. Unlike other milling tools carrying inserts with serrated cutting ...
ISCAR Tools
Diameter : 10 mm - 40 mm
Cutter range 10-40 mm (0.375-1.500 inch) Max depth of cut 5 mm (0.197 inch) Recommended slotting depth of cut 3 mm (0.118 inch) Insert corner radii range 0.2-1.6 mm (0.008-0.063 inch)
SECO TOOLS
Diameter : 12 mm - 20 mm
Length: 37.5 mm - 300 mm
Indexable endmill for high-precision finishing Excellent surface fi nish and stable machining due to secure clamping and minimum run-out New indexable endmill for die & mold and aerospace industries.
Tungaloy Germany
Diameter : 10 mm - 12 mm
... profiles with up to 200 teeth. Hob Gear milling cutter Hobs single position Hob for bevel gear Cutter frontal gear 1-turn hob Hob conikron Broaching tool internal gear Carbide ...
Diameter : 2 mm - 16 mm
... teeth: 2 / 4 flutes Aurora coat series AURORA COAT is a high hardness, low coefficient layer of DLC - Diamond Like Carbon DLC coat can be used for dry cutting and is environmental ...
Sumitomo Electric Hartmetall GmbH
Diameter : 0.2 mm - 20 mm
Length: 50 mm - 150 mm
... in mid and high range cutting speeds with best results. Also in low reinforced plastics these tools are showing there most efficient power. Mills with 2 flutes Two flute ...
Hufschmied Zerspanungssysteme GmbH
Diameter : 80 mm - 200 mm
Designed for rapid metal removal when machining cast and ductile iron, the PWC 15 degree semi shoulder cutter features tangentially mounted inserts to maximise the amount of teeth in contact with the ...
Sumitomo Hardmetal Division
Diameter : 0.4 mm - 6 mm
Length: 1.5 mm - 20 mm
... precision New solid carbide cutters designed for high-efficPOKOLM_VHM-Fraeser_bis_65_HRCiency machining of tempered steel grades with up to 65 HRC With a brand new series of solid carbide cutters ...
Diameter : 4 mm - 10 mm
Length: 80, 60 mm
... ball-head end mills are characterised by the high accuracy of form of the full radius. The tools with numbers of teeth from Z1 to Z2, according to diameter range, are notable for their quiet running not just in the HSC area.
MAPAL
Diameter : 8 mm
Length: 50 mm
Rotational speed: 8,000 rpm - 36,000 rpm
The EURACRYL PL-FK-2 tool has a main cutting edge in SUPERFINISH® quality for the vertical edge of the material and 2 additional cutting edges with 45 ° degrees that ...
EURACRYL GmbH
Diameter : 80 mm - 315 mm
Length: 50, 63, 80 mm
Face Mill Series, Insert with 14 Cutting Edges AHX-W / Wedge type for cast iron Extra fine ~ super extra fine pitch AHX-S / Screw in type for all materials Coarse and fine pitch Maximizing the performance of ...
MITSUBISHI MATERIALS
Diameter : 19 mm - 32 mm
Length: 90, 120, 100, 80 mm
Boring and Chamfering Tools, Counterbores mono, Counterbore multi. 2-edge Chamfer Tool 2x45° and Chamfer and Face Milling Tool
Diameter : 0.38 mm - 1,000 mm
Length: 0.5 in - 1.25 in
Rotational speed: 15,000 rpm - 30,000 rpm
Our HVMag is a 2 flute tool, with field tested, patented geometries designed specifically for the newest generation of hyper-velocity machining centers. We have produced an exceptionally ...
Diameter : 3 mm - 20 mm
Length: 40 mm - 104 mm
End mills Z=2 straight flute Internal Standard "ULTRA Ra” Speed Line with fine lapped chip flutes
Cerin s.p.a.
Diameter : 6, 10 mm
... to 4000HV and 1200*0 , respectively. Cutting parameters: Cutting speed Vc = 130 (120-180) m / min Cut depth ap = 1/3D (1 / 8-1 / 2D) Cut width ae = 1/2D (1 / 4-1D) Single ...
Diameter : 50 mm - 200 mm
Groups of milling cutters made with carbide tips or of high speed steel or of whole-carbide, for aluminium and/or pvc profiles working. Hss right and left bits for aluminium and pvc working.
Diameter : 3 mm - 8 mm
... in 2 flute and 3 flute design for better working stability. Highest PCD substrate quality. Other dimensions are available per request. Telcon Diamond Ltd. is a ...
Telcon Engineering Ltd.
Diameter : 12 mm
Length: 64 mm
Two flute finishing tools are used when a smooth edge cut is required and is a popular tool design for most routing applications. The helical cutting edge reduces material contact while in the cut. These ...
Diameter : 25 mm - 40 mm
The perfect combination of resistance and finishing quality Optimum tool for production machinig Operation: roughing, semi-roughing Extras: internal cooling, Weldon shank and tool shank lengthl
Euskron S.A.
Diameter : 0.5, 1, 1.5, 2, 2.5 mm
Length: 50 mm
Karcan Cutting Tools
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining