- Machine-tools >
- Cutting Tool >
- Cast iron milling cutter >
- Walter
Walter cast iron milling cutters
... Offers good impact strength and cost efficient machining due to high productivity achieved with both high feed and cutting depth. Suitable for face milling of cast ...
Dormer Pramet
... times. The system has been developed primarily for the general machining and die & mould industries with the TungFlex series being targeted at machining steels, stainless steel, cast ...
Diameter : 1 mm - 20 mm
Length: 50 mm - 100 mm
Rotational speed: 600 rpm - 18,000 rpm
Multipurpose End Mills- 3 Flutes Steel < 48HRC MG Carbide AlTiCrN HX 1. Effectively decrease the vibrationby the designs of various helix geometry and unequal flutes. 2. Big chip breaker is designed to reach high removal rate ...
7Leaders Corp.
Diameter : 1 mm - 25 mm
Length: 50 mm - 120 mm
Rotational speed: 380 rpm - 31,800 rpm
Multipurpose End Mills- 4 Flutes Steel < 48HRC MG Carbide AlTiCrN HX 1.Effectively decrease the vibrationby various helix geometry andunequal flutes designs. 2.Big chip breaker is designed to reach high removal rate for various ...
7Leaders Corp.
Diameter : 1 mm - 20 mm
Length: 50 mm - 150 mm
Rotational speed: 480 rpm - 31,800 rpm
E141-1.5HX / 2.0HX / 3.0HX Multipurpose End Mills- 4 Flutes with various short and long length types Steel < 48HRC MG Carbide AlTiCrN HX 1. Effectively decrease the vibration by various helix geometry and unequal flutes designs. 2. ...
7Leaders Corp.
Diameter : 25 mm - 50 mm
Length: 110 mm - 140 mm
RECOMMENDED INSERT: MITSUBISHI INSERTS CCMT06,CCMT09,CCMT12,CPMT08
Diameter : 63, 80, 100 mm
Length: 50 mm
■With scraped APMT1604 inserts,reducing tooling costs to zero.
Diameter : 3 mm - 20 mm
Length: 75, 100, 150 mm
4-flute End Mill | Square Head | Straight Shank | Coating TiAlCrN | With Long Cutting Edge Features: * Cutting flutes: 4; * Helix angle: 45°; * Coating: TiAlCrN; * Min diameter: 3.0 mm; * Max diameter: ...
Diameter : 6 mm - 25 mm
Length: 54 mm - 121 mm
... chatter suppression over symmetrical designs. Features Radial Rake Specially designed radial rake balances positive cutting action and edge strength. End grind features include a positive axial rake for high-performance ...
KYOCERA SGS Precision Tools
Diameter : 1 in - 6 in
Length: 1.75, 2.38, 3.38 in
Heavy Duty 45 degree lead facemill series is ideally suited for massive chip-loads in forged steels, cast steels and irons Ingersoll’s “Shear-Clear” combines extremely strong insert with high axial shear High ...
Ingersoll Cutting Tools
Diameter : 0.3 mm - 20 mm
Length: 50 mm - 160 mm
... Realizes longer tool life in cutting prehardened Steel such as HPM-MAGIC, carbon Steel, alloy Steel, stainless Steel, hot and cold tool Steel, etc. By improving heat résistance, longer tool life is achievable for ...
MOLDINO Tool Engineering Europe GmbH
Diameter : 21, 29 mm
Rotational speed: 31,000, 27,400, 36,600 rpm
Dramatically improves MRR using the latest milling strategies. Engineered to run up to 0,1 IPT. Ideal for pocketing, ramping, and helical interpolations. Z-plunge capabilities. First choice for deep cavities or from 3 x D.
Diameter : 6.3 mm - 31 mm
Length: 45 mm - 71 mm
... tempering steels, Alloyed tempering steels, Nitriding steels, Tool steels, High-speed steels, Cast iron, Ductile iron, Malleable cast iron, White cast ...
... revolving the lifting nut from the side. High Speed Cutter for Aluminum and Cast Iron Quick Adjustment of Cutting Edge Height Light Weight & High Rigidity Secure ...
Diameter : 63 mm - 160 mm
Cutter range 63-160 mm (2-5 inch) Max depth of cut 13 mm (0.511 inch) Recommended depth of cut 8 mm (0.315 inch) 8 cutting edges, double-sided inserts
Diameter : 100 mm
... the cutter's unique cutting edges and design optimizes surface roughness while machining depths of cut of under 0.5 mm and reduces set-up time. The double-sided 4 corner 4WHU insert’s ...
Diameter : 4, 3, 25, 9, 45 mm
... supply delivers the coolant directly to the cutting edge. The three carbide cutting edges and three insert seats in the tool body are manufactured to extremely tight tolerances. This means that high ...
Diameter : 20 mm - 160 mm
... two grades have been added: ACP200 grade for steel machining and ACK300 grade for cast iron machining. Handle an even wider range of milling needs with the RSX(F)08000 ...
Sumitomo Electric Hartmetall GmbH
Diameter : 80 mm - 200 mm
Designed for rapid metal removal when machining cast and ductile iron, the PWC 15 degree semi shoulder cutter features tangentially mounted inserts to maximise the amount ...
Diameter : 35 mm - 125 mm
Length: 42, 52 mm
... axial rake angle allow extremely easy cutting when using these new Milling Cutters. Using a cutting depth of < 2,2 mm ail cutting edges of these Octagonal ...
POKOLM Frästechnik GmbH & Co. KG
... economical machining of these large groups of materials, as two successful examples show New cutting material series for milling cast iron and steel ...
MAPAL
Diameter : 80 mm - 315 mm
Length: 50, 63, 80 mm
Face Mill Series, Insert with 14 Cutting Edges AHX-W / Wedge type for cast iron Extra fine ~ super extra fine pitch AHX-S / Screw in type for all materials Coarse and fine pitch Maximizing ...
MITSUBISHI MATERIALS
Diameter : 0.38 in - 1 in
Length: 0.5 in - 3 in
... carbon steels and cast iron. The multi-flute design allows for increased feed rates while not requiring massive amounts of horsepower. The tools are available from stock in stub and standard length with ...
Data Flute CNC
Diameter : 50 mm - 250 mm
... maximize machining efficiency. Side milling cutters of entire series are equipped with original screws with patented design and keys imported from Swiss to enhance locking strength more ...
YIH TROUN CUTTING TOOLS GMBH
... Advantages Provides a 25-50% increase in tool life over the competition Increased strength and rigidity when cutting forces are applied Standard cutting lengths accommodate multiple applications without ...
Allied Machine & Engineering
Diameter : 1 mm - 16 mm
Length: 50 mm - 150 mm
Torus copy cutters - Z=2 Helix 40° Internal standard extra long | “ULTRA Ra” Speed Line with fine lapped chip flutes Standard and Custom Coating
Diameter : 0.25 in - 0.75 in
Length: 2 in - 2.75 in
... stock removal in harder materials Chisel type cutting edge to minimise tool chatter and reduce chips to granular shape Suitable for use in steel, stainless steel, high temperature alloys and cast ...
Diameter : 10, 6 mm
... steel, general steel, cast iron, mould steel, nickel alloy, aluminum alloy, copper alloy, 45# steel, etc. Product Design: Sharp wave and 35 helix angle design improve the chip removal capacity,widely ...
Diameter : 32, 40, 45, 50 mm
... for a wide range of applications. The extremely smooth cutting, which is also evident in heavy duty machining scenarios, delivers highly precise machining results. This is a critical advantage to ensure ...
Avantec Zerspantechnik GmbH
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining