Walter metal milling cutters

Diameter : 0.13 in - 1 in
Length: 0.25 in - 2.63 in

The SS series 3 flute end mill remains the work horse when roughing in ferrous alloy applications. A standard corner radius protects the tool corner and enhances tool life in aggressive roughing applications. The SS series is offered ...

Face milling of aluminium alloy and light metal alloy; ultra-polished mirror face.

Diameter : 6 mm - 30 mm

... tools not only for CNC machining We engineer and produce beveling tools for your applications. The GERIMA tool program is the right decision when it comes to the application of bevels or radii in metal ...

Diameter : 2 mm - 16 mm

... coat can be used for dry cutting and is environmental friendly Producing excellent surface finish for machining of aluminium Very smooth AURORA COAT results in low adhesion as well as good surface ...

... carbide or our superior PCD inserts this cutter is suitable for high precision machining at high speeds - VC=5000m/min.Capable of mirror finishing and roughing aluminium alloys and non ferrous metals the cutter ...

Diameter : 50 mm - 500 mm
Length: 48 mm - 100 mm
Rotational speed: 4,880 rpm - 25,000 rpm

... classic amongst all the milling heads, has been constantly adapted to meet the growing demands of cutting operations. The main difference to the EcoMill series lies in the milling cartridge. ...

Diameter : 3 mm - 12 mm
Length: 84, 76, 65, 60 mm
Rotational speed: 8,000 rpm - 36,000 rpm

... In addition to the peripheral cutting edge, it also has a short front cutting edge as an auxiliary cutting edge with which a small * horizontal surface can be machined, as the bottom ...

Diameter : 1 mm - 25 mm
Rotational speed: 480 rpm - 40,000 rpm

... resulting in better machined surfaces, reduced cutting resistance and improved chip discharge. This is the next generation of coated end mills that delivers long tool life and is the first choice when machining ...

Diameter : 4 mm - 10 mm
Length: 58, 57 mm

... Mill EFA EFA - 4,5,6,8,10 Description: Special cutting geometry for Aluminium. Wide flutes for good chip removal. Cutting geometry for boring and ramping. Working range: Milling, ...

Diameter : 2 mm - 40 mm
Length: 0 mm - 250 mm
Rotational speed: 100 rpm - 50,000 rpm

... K05, K10, K20, K30, K40 depending on the type of machined material MASAM chooses End Mills MASAM is possible to use for machining at least whole material groups under ISO classification – P,M,K,N,S,H DIN 6535 HA, ...

Diameter : 1 mm - 12 mm
Length: 3 mm - 12 mm

... sectors such as the automobile, the aeronautics or for the manufacture of injection moulds. We also have saw cutters for various cutting work.

Diameter : 50 mm - 250 mm

Indexable side milling cutter exclusively used for slotting / cut-off application. Its unique insert cutting edge design is used for small / large slot width, deep groove or material ...

Diameter : 50, 63, 66, 80 mm
Length: 75, 90, 100 mm

... for a wide range of applications. The extremely smooth cutting, which is also evident in heavy duty machining scenarios, delivers highly precise machining results. This is a critical advantage to ensure ...

Diameter : 3 mm
Length: 38 mm

DATRON Single Flute End Mill, 3mm dia., 1/8 in shank D1 = 3.0 mm, D2 = 3.175mm (1/8 Inch), L1 = 38.0mm, L2 = 9.0mm Able to cut aluminum, wood, plastic, copper, brass and

... end mills for slot milling, finish cutting, deburring, rough cutting, trochoidal milling, profile milling and circumference milling. Karnasch's product range of CNC ...

Diameter : 6 mm - 20 mm
Length: 58 mm - 165 mm

Diameter : 50 mm
Length: 50, 100, 75 mm

Product introduction ： HP-MAX Ball End Mill 2-Flute 30 Tool Materials ：Micro Grain Carbide Applicable Work Materia：NAK/HPM Application field ： Application industry covers automobile, motorcycle, engine, aerospace, military ...

Diameter : 63, 100, 125 mm

High-precision aluminum machining with diamonds URMA cannot reinvent the wheel, or indeed aluminum machining – however, thanks to the new modular MX diamond milling ...

Diameter : 10, 6 mm

... cast iron, mould steel, nickel alloy, aluminum alloy, copper alloy, 45# steel, etc. Product Design: Sharp wave and 35 helix angle design improve the chip removal capacity,widely used in slot, profile, rough milling.

... of ceramic milling cutter is better than that of coated tungsten steel cutter. The service life of ceramic milling cutter is longer and the surface ...

Diameter : 3 mm - 16 mm
Length: 60, 70, 75 mm

... dimensions are available per request. Telcon Diamond Ltd. is a world leading manufacturer of Diamond PCD and CVD cutting tools for the machining of composite materials: CFRP, GFRP, MMC, CMC and hard ...

Diameter : 0.06 in - 1 in
Length: 1.5, 2.5, 3, 3.5, 4 in

... ferrous materials and soft materials 45° high helix for reduced cutting forces and increased material removal rates Stub flutes for maximum rigidity Corner radius profile Center cutting ZrN coated ...

Diameter : 0.8 mm - 12 mm
Length: 3 mm - 75 mm

2 FLUTE, DIAMOND COATING BALL NOSE High performance on graphite, wrought aluminum,bakelite, plastics, wood, brass etc

Diameter : 0.25 in - 0.63 in
Length: 2 in - 2.32 in

Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.

Diameter : 2 mm
Length: 40 mm

One flute end mill for professional vertical machining on milling machines and CNC milling routers. Main application: soft aluminum, hard aluminum, non-ferrous metals, ...