WEH vacuum testing fittings

Diameter: 0.13 in - 1 in
Operating pressure: 350 bar

Pressure-tight connections in seconds for pressure, function and leak testing. The Connector is designed for sealing standardized female thread applications for hydraulic and pneumatic pressure tests. The higher the test ...

Diameter: 0.13 in - 1 in
Operating pressure: 0 bar - 350 bar

... front o-ring reliably seals the connection and no additional clamping devices are required. Time-consuming and expensive testing devices are eliminated. The TW17 quick connector is available with different actuations: Manually ...

Operating pressure: 350 bar

... front o-ring reliably seals the connection and no additional clamping devices are required. Time-consuming and expensive testing devices are eliminated. The TW17 quick connector is available with different actuations: Manually ...

Diameter: 0.25 in - 1 in
Operating pressure: 0 bar - 350 bar

The WEH® TW19 Quick Connector is especially designed for sealing hydraulic components with internal threads in high and low pressure applications. The clamping lever actuated connector safely grips into the test piece, even in case of ...

Diameter: 0.5, 0.25 in
Operating pressure: 5 bar - 12 bar

... impacting of the test piece is accomplished in one operation by simple actuation of the sliding sleeve. In this way, costly testing times are shortened and the quick connector pays for itself in a very short time.

Diameter: 0.13 in - 1.5 in
Operating pressure: 345 bar

The WEH® TW03 quick connector is especially designed for testing components with internal threads. Only hand-tighten the quick coupling into the thread until the o-ring seal contacts the test piece. The TW03 seals without ...

Diameter: 0.5 in
Operating pressure: 350 bar

The WEH® TW18 Quick Connector establishes pressure-tight connections to components with external threads within seconds. Only place the connector onto the thread of the test piece, the clamping jaws grip on the thread and a pressure-tight ...

Operating pressure: 50 bar

The WEH® TW04 Quick Connector provides fast leak tight connections to components with external threads for testing, filling, plugging and venting. Only hand-tighten the connector onto the thread until the o-ring seal ...

Operating pressure: 100 bar

The WEH® TW141 Quick Connector is ideally suited for function, pressure and leak testing at straight tubes with an external Ø of 4.8 mm to 22.0 mm as well as filling of closed cooling circuits with refrigerants. Safe ...

Diameter: 2 mm - 5 mm
Operating pressure: 70 bar

The WEH® TW230 Quick Connector is suitable for underwater, pressure decay and helium testing. It is equipped with a safety system that prevents the type TW230 from being inadvertently disconnected whilst under pressure. ...