Pressure: 225 psi - 400 psi
... Altitude Valve controls the high water level in reservoirs without the need for floats or other devices. It is a non-throttling valve that remains fully open until the shut-off point ...
CLA-VAL Automatic Control Valves
... below the valve. The float mechanism may be located remotely from the main valve. See the technical data sheet on Model CF1-C1 Float Control for additional information. This is a hydraulically ...
CLA-VAL Automatic Control Valves
... and/or stuffing boxes are not allowed and there shall be no pistons operating the main valve or pilot controls. The Cla-Val Model 40-01 Rate of Flow Control Valve prevents ...
CLA-VAL Automatic Control Valves
Pressure: 0 bar - 250 bar
Flow rate: 0 l/min - 25 l/min
... RPCED1-*/T3 is a three-way flow control valve, pressure and temperature compensated with electric proportional control and mounting interface in compliance with ISO 6263 (CETOP RP121H) standards. — ...
Duplomatic Oleodinamica
Pressure: 6,000 psi
... 207bar) PSB4NS-X4 - 6,000psi (414bar) The 4-way multi diverter valves are an economical and safe method of diverting high pressure lines, this replaces several high pressure 2-way valves. Ideal for sampling ...
Alco
... butterfly valves of the series BFV are DVGW approved to the norms EN 161 and bear the - I D - Number. They are suitable to be used on residential and industrial combustion systems. They are particularly suitable for both manual ...
ECONEX S.R.L.
DN: 40 mm
Pressure: 10, 20 bar
Temperature: 50 °C
all medium contact parts made of Titanium Grade 2 | extremely corrosion-resistant, lightweight and compact | combined shut-off and pressure reducing function | manageable installation, easy-to-maintain owing to the clamp system | especially ...
DN: 40 mm - 80 mm
Pressure: 16 bar
Temperature: 130 °C
Float valves automatically control liquid levels in sealed or open (non-pressurised) tanks and vessels without requiring external energy. The float registers the liquid level and directly controls ...
DN: 25 mm - 150 mm
Pressure: 10 bar
Temperature: -10 °C - 25 °C
... different applications and products Easy maintenance without the need for special tools Sturdiness: valve bodies made from solid bar The BZAW3 is a double seal valve designed to guarantee separation ...
BARDIANI VALVOLE S.p.a.
DN: 0.5, 0.25 in
Pressure: 6,000 psi
Temperature: 200 °F
... All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Slotted spring pin to prevent accidental loosening ...
DN: 2.5, 0.75, 1.5, 0.5, 2 in
Pressure: 16, 40, 150, 300 bar
Temperature: 280, 300, 400, 238, 250 °C
... sense. Sightglasses – GESTRA Vaposkops – or monitoring electrodes are a fixed part of the equipment. USE VK Vaposkops are valves that allow you to see flow processes in pipes. When they are installed upstream of a steam ...
DN: 0.5, 1, 0.125, 0.25 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
Quick exhaust valves SR are used to exhaust the pressure of the chambers of a pneumatic cylinder directly into the atmosphere, growing the speed of the cylinder to the maximum. They have the body and the components ...
Planning, construction and delivery of high quality valves for power plant and process heat generation.
Pressure: 0 psi - 5,500 psi
The Series MV High Pressure Gas Control Valve is optimized for the demanding requirements of Gas Cylinder Fill Plants, Manifold, and Piping System applications. The High Pressure Oxygen Service Valve ...
Generant
DN: 25 mm - 150 mm
Pressure: 6 bar
... air operated pinch valves can also be provided in compliance with DIN 11853-2 and DIN 11864-2 Form A. Air Pinch Valve, VMC Series, Stainless steel design, ANSI B 16.5-150lbs Air operated pinch valve ...
AKO ARMATUREN
DN: 10 mm - 50 mm
Pressure: 4.5, 6 bar
... on nominal diameter, operating pressure, control pressure, operating temperature, product and activation AKO air operated Pinch Valves with Internal Thread Connection - VMP Series The air operated ...
AKO ARMATUREN
DN: 10 mm - 50 mm
Pressure: 6 bar
... the VM series pneumatic pinch valves can also be offered with alternative individually customised connections. For information on advantages of AKO pinch valves and their functions, see air operated ...
AKO ARMATUREN
DN: 16, 12, 10 mm
Pressure: 0 bar - 350 bar
Temperature: -20 °C - 80 °C
New valve series, with priority flow on demand and pressure compensator with static or dynamic load sense. These valves can be used to supply steering control units and have the required ...
DN: 0.75, 0.5 in
Pressure: 150, 300 psi
Temperature: 358, 550 °F
... ’s Flow Control Four-V Port Globe Valves are equipped with a micrometer dial and pointer which enables the valve to set within 1/100th of a turn of the handwheel. This allows you to fine-tune ...
DN: 0.5, 0.75, 1 in
Pressure: 250 psi
Temperature: 400 °F
The Motorized Ball Valve delivers a torque of 150 in-lbs using a non-reversing motor, opening the valve in 5 seconds and minimizing pressure hammer. The motor is protected in a NEMA 4X enclosure and features ...
Pressure: 700 bar - 1,500 bar
... NiSoX-Valve technology introduces a complete change in high pressure homogenization technology. The NiSoX-Valve design optimizes different fluid dynamic effects employing the energy in the most efficient ...
DN: 2 mm - 30 mm
This bi-directional valve is ideal for controlling varying flow rates of gas, liquid and slurries. Rangeability in excess of 350 to 1 Cavitation and noise reduction trim available Bi-directional ...
Celeros
DN: 0.375 in - 24 in
Pressure: 2,500 psi
Temperature: 360 °C
... actuator wall-mounting of the entire valve. The design is in accordance with ANSI B16.1, B16.5, B16.11, B16.25, B16.34. Copes-Vulcan also holds the following certifications that can be applied to the GS-Style Globe valve: ...
Celeros
DN: 2 in - 36 in
... water, and safety injection valves. Copes-Vulcan nuclear valves are manufactured in Houston, Texas. The Houston facility holds the following certification 'N', 'NPT', and 'NR' and is certified by ASME ...
Celeros
DN: 0.5 in - 6 in
Flow rate: 0 us gal/min - 880 us gal/min
... make Cv calculations when selecting control valves Always maintains 100% authority, ensuring excellent control Combination valve reduces cost and more accurate ...
DN: 0.75 in - 3 in
Flow rate: 0 l/min - 300 l/min
... Bronze valves with seat connections. Packing & Gasket: Asbestos-Free B&G Flo-Control Valves are used for preventing gravity flow in forced water systems and to permit summer-winter ...
DN: 0.75 in
Flow rate: 9 us gal/min
... hydronic systems utilizing zone valves Controls excess flow in the system when there is reduction in demand Available in ¾” connection All brass body with non-ferrous internals The differential ...
DN: 2 in - 12 in
... available • Integral top-works direct mounting pad to ISO 5211 • 6” and larger valves are equipped with lifting lugs • 8” and larger valves can be equipped with vent and drain valves ...
HABONIM
DN: 0.25 in - 8 in
Pressure: 1,494 psi
... Tight stem-to-ball directional engagement, ensures relief hole alignment. Strict materials and manufacturing tolerances control. Efficient heat transfer A narrow space between the extension ID and the stem OD allows ...
HABONIM
DN: 0.25 in - 8 in
... . Tight stem-to-ball directional engagement, ensures relief hole alignment. Strict materials and manufacturing tolerances control. Efficient heat transfer Narrow space between extension ID and stem OD allows the stem ...
HABONIM
Pressure: 25,000,000 Pa
Flow rate: 10, 40, 140, 250 l/min
... and speed control functions. Controls direction by supplying an input current into one of the two proportional solenoids and controls flow by changing the input current. Remote ...
DN: 40 mm - 300 mm
Pressure: 25, 16, 10 bar
Temperature: -10 °C - 90 °C
pressure reducing valves Controls and maintains a constant preset reduced downstream pressure regardless of variations in downstream demand or upstream pressure
DN: 8, 6, 12 mm
Pressure: 0 Pa - 35,000,000 Pa
Temperature: -30 °C - 51 °C
Single conterbalance valves with regenerative function. Flow range from 1 to 160 liters / min. Max calibration pressure 350 bar. Assembly with in-line manifold or CETOP3 flanging, in steel or aluminum material.
OMT Group
DN: 4 mm - 38 mm
Pressure: 350, 400, 500 bar
Temperature: -20 °C - 80 °C
Connection 1 + 2 BSP cylindrical internal threads Sealing form 1 + 2 for screw-in pins with shapes A, B and if necessary E Note Bitte die Bedienungsanleitung für Kugelhähne beachten. Bitte die zul. Druckangaben ...
DN: 6 mm - 38 mm
Pressure: 400 bar
Temperature: -20 °C - 60 °C
Connection 1 + 2 BSP cylindrical internal threads Sealing form 1 + 2 for screw-in pins with shapes A, B and if necessary E Note Bitte die Bedienungsanleitung für Kugelhähne beachten. Bitte die zul. Druckangaben ...
DN: 6 mm - 50 mm
Pressure: 25 bar
Temperature: -20 °C - 150 °C
Sealing form 1 - 3 Shape A Connection 1 - 3 BSP cylindrical internal threads Bore L shaped Contact travel 0°; 90° Surface nickel plated Material Brass housing Aluminium handle Brass ball, ...
DN: 0.375 in
NEEDLE VALVE A 109 N Needle valve A 109 N • For accurate control of the oil flow, also under maximum pressure • Connection: 3/8" NPT female (2x)
Holmatro Industrial equipment
Gate valves Gate valves are primarily used to enable or prevent a fluid medium to flow (i.e. ON / OFF control). A fully open gate valve results in no obstruction to ...
KLINGER
Please specify:
Help us improve:
remaining