Control valves

DN: 10 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 150 °C

... the diameter of the pipe High flow capacity 2. Pneumatic actuator integrated in the valve Space saving (-60%) and reduced costs compared to an automated valve 3. Piston with chemical nickel plating Lower wear ...

... Part 0006522676 air fill valve for portable stainless steel tanks. ...

DN: 8 mm - 19 mm
Pressure: 0 bar - 40 bar

... Brass diaphragm valve For non corrosive gases and gas mixtures up to quality 6.0 Suitable for pressures up to 40 bar Wide range of in- / outlets Metal-to-metal sealing to atmosphere Tested to use with oxygen Ergonomically ...

Pressure: 0 bar - 13.6 bar

... Magna™ Flow Control Valve Series 608 Flow Control Valve For Gases or Liquids The Magna Flow Control Valve with an easy to read micrometer dial offers ...

DN: 2 in - 12 in

... available • Integral top-works direct mounting pad to ISO 5211 • 6” and larger valves are equipped with lifting lugs • 8” and larger valves can be equipped with vent and drain valves (Optional) • ...

DN: 8 mm - 80 mm
Pressure: 63 bar
Temperature: -50 °C - 180 °C

... Two-piece stainless steel ball valve with screwed ends. Low pressure loss due to full and extremely smooth passage. Blow-out proof switching shafts are inserted from the inside. The ball valve does not require any maintenance ...

DN: 20 mm - 80 mm
Pressure: 0 mbar - 500 mbar
Temperature: -20 °C - 60 °C

... modulating valves Modulating valves LMV are used in combustion processes that require linear adjustment of air or gas flow. The flow varies proportionally to the opening angle of inner mechanism, therefore flowrate ...

DN: 0.375 in - 2 in
Pressure: 0.2 bar - 20 bar
Temperature: -60 °C - 225 °C

... resistant stainless steel provides a solution. The sealed and gas-tight design covers an even wider application range. The valves can be conveniently adjusted or aligned using the external adjustment, which means that perfect alignment ...

... Planning, construction and delivery of high quality valves for power plant and process heat generation. ...

DN: 25 mm - 500 mm
Temperature: -198 °C - 593 °C

... Neles globe valves designed to provide the best possible control accuracy and wide rangeability with economical high-performance. Standard units are equipped with linear actuators and ND9000 intelligent valve ...

Pressure: 0 psi - 5,500 psi

... The Series MV High Pressure Gas Control Valve is optimized for the demanding requirements of Gas Cylinder Fill Plants, Manifold, and Piping System applications. The High Pressure Oxygen Service Valve ...

Pressure: 350 bar
Temperature: -18 °C - 105 °C

... Connect one end to a Quick-test hose and the other to the process connection then turn the knob to control the pressure • Easily control pressure of a closed system • Fine tune pressure to a precise number ...

DN: 0.5, 0.75 in
Pressure: 20.7 bar
Temperature: 149 °C

... The HAT/FP is a reliable and automatic freeze protection valve designed to protect water resupply lines from freezing. This thermostatic valve controls flow based on temperature variations to prevent ...

Pressure: 303 bar
Temperature: 121 °C

... sampling components from high temperature liquids. It is an economical and reliable mechanical replacement for a solenoid shutoff valve and temperature controller, requiring no external source of electricity, air or hydraulics. The sensor/actuator ...

Pressure: 0 psi - 600 psi
Temperature: 110 °C

... The Seetru Air Start Valve (GS56) The Seetru GS56 is a high quality control valve designed to handle a two-stage operation for air starting of engines. Air starting is typically used for diesel engines. ...

Pressure: 6,000 psi

... 207bar) PSB4NS-X4 - 6,000psi (414bar) The 4-way multi diverter valves are an economical and safe method of diverting high pressure lines, this replaces several high pressure 2-way valves. Ideal for sampling or vent / ...

... butterfly valves of the series BFV are DVGW approved to the norms EN 161 and bear the - I D - Number. They are suitable to be used on residential and industrial combustion systems. They are particularly suitable for both manual and automatic ...

DN: 6, 4, 8 mm
Pressure: 0 bar - 20 bar
Temperature: 0 °C - 140 °C

... Römer flow and stop valve program consists of throttle, shut-off and check valves. The function fittings offer fine adjustment possibilities for the precise regulation of fluid flows. Throttle valves ...

DN: 10 mm
Pressure: 0.3 bar - 10 bar
Temperature: 5 °C - 90 °C

... The DN 10 float valve (angle valve) is a servo-controlled membrane valve that closes by the buoyancy of the float to regulate the level in containers. When liquid is withdrawn from the tank, the float ...

... Cameron's DBA multistage choke is a multiple-pressure drop, anticavitation valve ideally suited for water injection. It controls the problems of cavitation, excessive noise, and vibration. To optimize performance, our ...

DN: 20 mm - 100 mm
Pressure: 12 bar - 40 bar
Temperature: 0 °C - 220 °C

... 2/3-Way Motorised Control Valves with Electric Actuator For Mixing or Diverting type(On-Off and Control Application). Fluid: Air, Water, Steam, Gas ...

DN: 0.25 in - 0.5 in
Pressure: 0 bar - 210 bar
Flow rate: 0 l/min - 55 l/min

... Variable Flow Control Valves maintain the flow rate of hydraulic fluid to a selected value. Applications include hydraulic cylinders requiring constant extension or retraction speeds and hydraulic motors requiring constant ...

DN: 1 mm - 6 mm
Temperature: -10 °C - 200 °C

... Pneumatic control valve VALVE STYLE Globe valve USAGE Throttling service Low-pressure service Mixing or diverting service On/off service Mixing service VERSION ANSI MEDIUM ...

DN: 0.25 in - 2 in
Pressure: 400 psi

... Threaded, 2-Piece, Std. Port, Bronze Ball Valve, 400 CWP, Sizes: 1/4" to 2" (DN 8 to DN 50) ...

DN: 0.125 in
Pressure: 0 bar - 34.5 bar
Temperature: 0 °C - 121 °C

... 90 degree flow patterns Valves are offered in straight (T) and 90 degree (L) flow patterns. All valves are supplied with 1/8” FNPT inlet and outlet ports. Valve cartridges are also interchangeable ...