- Hydraulics - Pneumatics >
- Valve >
- Regulating valve
Regulating valves
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
DN: 15 mm - 250 mm
Pressure: 10 bar - 100 bar
Temperature: -60 °C - 350 °C
The sliding gate control valve type 8021 in reinforced GS3 design with integrated positioner is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can perfectly be handled. ...
Schubert & Salzer Control Systems GmbH
DN: 15 mm - 250 mm
Pressure: 10 bar - 40 bar
Temperature: -60 °C - 350 °C
The sliding gate control valve type 8043 in a reinforced version and long design with piston actuator and integrated positioner is due to its compact design universally applicable for neutral and aggressive media in the ...
Schubert & Salzer Control Systems GmbH
DN: 15 mm - 125 mm
Pressure: 10 bar - 40 bar
Temperature: -60 °C - 230 °C
This compact motor valve is used in a wide range of process engineering control tasks. It is particularly characterised by its very short design. Most media such as steam, fluids, gases, etc. can be excellently controlled ...
Schubert & Salzer Control Systems GmbH
Pressure: 315, 320 bar
Temperature: -40 °C - 80 °C
Flow rate: 30, 120, 90, 50, 20 l/min
... manifold mounting valve. Pressure-limiting valves and randomly switchable idle circulation valves are additional options. The flow control valve type SE and SEH controls ...
HAWE Hydraulik SE
Pressure: 180, 350, 320 bar
Flow rate: 40, 80, 120, 12, 20 l/min
Proportional pressure-reducing valves are a type of pressure control valve. They remotely control the pressure in hydraulic systems continually and electrically. The proportional pressure-reducing ...
HAWE Hydraulik SE
DN: 6.5, 9 mm
Pressure: 400, 300, 30, 100 bar
Temperature: -40 °C - 80 °C
Pressure reducing valves type ADC and AM are suitable for the supply of control circuits with low oil consumption. These valves feature an override compensation, i.e. acting like a pressure-limiting valve ...
HAWE Hydraulik SE
DN: 20, 15, 10 mm
Pressure: 10 bar
Temperature: 150 °C
... drops, cleaning time and CIP consumption •3-A approved The valve models are available in DN10, DN15, DN20 and ½" sizes. Optionally available are a tank outlet version and three electrical valve position ...
APV
DN: 25 mm - 100 mm
Pressure: 10 bar
Temperature: 150, 140 °C
The MS4 and MSP4 aseptic single seat valve series are designed for applications in the food, beverage, dairy, pharmaceutical and chemical industries. These valves are available in shut-off, change over, ...
APV
DN: 50 mm
Pressure: 0 bar - 10 bar
Temperature: 140, 135 °C
The CPV constant pressure diaphragm valve forms part of the pneumatically operated pressure regulating and pressure holding valves which keep process pressures constant in process technological ...
APV
Pressure: 30 psi - 100 psi
Temperature: 32 °F - 180 °F
Flow rate: 420 l/s
Pow-R-Amp vacuum console regulator obtains air flow rating of 100 psig or 15 standard cubic feet per minute, with nominal pressure rate scale between 30 and 100 psig. Ideally, this controller is used on Voltage in Alternating Current ...
DN: 0.125 in
Pressure: 50, 100 psi
Temperature: 32 °F - 230 °F
Needle Valve, #10-32 Input Ports Notes K=knob Additional Information Air Flow 5 scfm@ 100 psig Max PSI 2000 psig Ports 10-32 Thread Temperature Range 32 to 230 F
Pressure: 0 bar - 17 bar
Temperature: 0 °C - 110 °C
... pneumatic pinch valves are air-piloted devices designed to open or close tubes for controlling flow of liquids and gases. Other valve types have internal passages that may cause small amounts of fluid ...
DN: 0.063 in - 0.118 in
Pressure: 0 psi - 6,000 psi
Temperature: -54 °C - 232 °C
Parker's B Series ball valves, with a "free floating " ball design, offer superior performance in a variety of pressure and temperature applications in process, and instrumentation applications. Parker's B Series Ball ...
COMMON OPTIONS: Since check valves and shuttles are fairly simple components, there are very few options. Here are the standard options you will find. Seals: The Winner’s Circle products feature a standard 4301 Polyurethane ...
DN: 0.125 in
Pressure: 0.2 bar - 10 bar
Temperature: 0 °C - 80 °C
» Channelling of two signals coming alternately from two different points towards the same point The circuit selector Mod. SCS - 668-06 enables two signals coming alternately from two different points to be channelled towards the same point.
DN: 0.125, 0.25 in
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 80 °C
Circuit selector valves select two separate input signal without creating reciprocal interference, giving a single output signal. EAN code: 8024986016581 Quantity per package: 10 Minimum order quantity: 10 Unit ...
Pressure: 10, 100 bar
... Rotork manPOWER range high-integrity failsafe valve operation without the need for any power supply. The self-contained system is suitable for workshop or mounting on a wide range of rotary and linear operated valves ...
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 200 °C
The 2-way stainless-steel ball valve is the ideal partner for the pharmaceutical and cosmetics industry. Its sealing is compliant with FDA standards, and it has electropolished surfaces, long welded ends, or clamping ...
DN: 6, 15, 25, 50 mm
Pressure: 0 bar - 5 bar
Temperature: -5 °C - 60 °C
... normally open? The choice is yours. With the VZQA pinch valve, you can control media flows like granulate, fluids containing solids and highly viscous or abrasive media even better. The compact pneumatic valve ...
DN: 10 mm
Pressure: 1.5 bar - 3 bar
Temperature: 0 °C - 50 °C
... pneumatic valve. It is used to control gaseous and liquid media in laboratories The valve VZDB is a pilot-actuated pneumatic valve. Normally closed (2/2-way solenoid valve ...
DN: 15 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 80 °C
Externally controlled diaphragm valve with piston actuator and diaphragm seal. As standard, actuator from PA. The flow optimised and zero dead space valve body makes high flow rates possible. Flow ...
BÜRKERT FLUID CONTROL SYSTEMS
DN: 8 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 143 °C
... diaphragm valve Type 2032 consists of a pneumatically operated piston actuator, a diaphragm and a T-valve body. The proven and robust actuator with a plastic housing ensures use in hygienic or aggressive ...
BÜRKERT FLUID CONTROL SYSTEMS
DN: 8 mm - 100 mm
Pressure: 0 bar - 7 bar
Temperature: -10 °C - 143 °C
The externally controlled diaphragm valve Type 2033 consists of a pneumatically operated piston actuator, a diaphragm and a tank bottom valve body. The proven and robust actuator with a plastic housing ...
BÜRKERT FLUID CONTROL SYSTEMS
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 60 °C
Flow rate: 15,420 l/min
Interchangeable for NC, NO or double acting functions Visual position indicator as standard Dampened closing (closes against flow direction) Suitable for contaminated flow fluids Suitable for vacuum up to max. ...
Norgren
Pressure: 0 bar - 7 bar
Temperature: -10 °C - 60 °C
Flow rate: 35,470 l/min
Visual position indicator as standard Dampened closing (closes against flow direction) Suitable for contaminated flow fluids Suitable for vacuum up to max. 90% Reversed flow direction optional Port size: - G1-1/4 Operation: - 2/2
Norgren
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 60 °C
Flow rate: 5 m³/h
Visual position indicator as standard Dampened closing (closes against flow direction) Suitable for contaminated flow fluids Suitable for vacuum up to max. 90% Reversed flow direction optional Port size: - G1/2 Operation: - 2/2
Norgren
This energy valve is a 2-way valve that functions as a modulator for water-side control. It has an actuator with sensor, while its cable measures 1 meter, with PN 16 flange. The energy valve ...
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C
Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. Applications - Air for aeration in wastewater treatment plant - ...
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C
Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal ...
DN: 0.07, 0.375 in
Pressure: 0 psi - 250 psi
... to protect a pneumatic actuator such as a chuck, press, or gripper from sudden bursts of high pressure. The internal needle valve restricts the initial movement of the actuator to a user defined speed, and then opens ...
Beswick Engineering Co, Inc.
DN: 1.78 mm
Pressure: 0 psi - 500 psi
Beswick’s miniature mixing/diverting ball valve is an excellent choice for applications requiring a port selection valve. The MBVMD allows bi-directional flow between a common inlet port on the bottom ...
Beswick Engineering Co, Inc.
DN: 1.78 mm
Pressure: 500 psi
... selector ball valve this is manufactured using stainless steel materials. It is an excellent choice for application requiring a port selection valve. The MBVT-1414 allows bi-directional flow between ...
Beswick Engineering Co, Inc.
DN: 0.25, 0.375 in
Pressure: 700 bar
DN: 0.75, 0.562, 0.375, 0.25, 1 in
Pressure: 1,550 bar
Temperature: -50 °C - 230 °C
... a high reliability of the valve. MAXIMATOR valves of the 21V series have a cold-machined stainless steel body. Valve bodies are available in six different designs and can be equipped ...
Maximator GmbH
DN: 0.25 mm - 14.3 mm
Pressure: 2,500 bar
Temperature: -252 °C - 650 °C
The 36V system is a stainless steel valve that can be operated using a regulating shaft. It has non-rotating stem that provides dependability, and long service lifespans of the device. It can withstand ...
Maximator GmbH
DN: 1 in
Pressure: 0 bar - 2,965 bar
Maximator high pressure valves with métal to métal seats have a high level of safety and reliability under adverse operating conditions. These valves may be used both with gases and liquids. Traceability ...
Maximator GmbH
DN: 0.5 mm - 0.9 mm
Pressure: 7 bar
Temperature: -10 °C - 50 °C
DN: 1.2 mm - 1.6 mm
Pressure: 0 bar - 6 bar
Temperature: -10 °C - 50 °C
... excessive pressure. It 'necessary to apply these valves when the elements to be lubricated are enclosed in tight enclosures or protected by a ring gasket. When the pressure calibration of valve is ...
DN: 3.175 mm
Pressure: 0 bar - 5.2 bar
Temperature: 0 °F - 150 °F
... the device. The PTFE needle valves are suitable for laboratory and industrial applications. It regulates corrosive gases and liquids for high pressure applications. These valves may also be utilized ...
DN: 0.75 in
Pressure: 0 bar - 138 bar
Temperature: 0 °C - 200 °C
... replacement valve with Brooks® purge meters. The Cartridge III Valve is a multipurpose valve, designed for use with Brooks® purge meters in gas and liquid flow applications. It is ...
DN: 0.125 in - 0.5 in
Pressure: 0 psi - 150 psi
Temperature: -18 °C - 70 °C
ANVER Slide Valves are manually controlled, 3-way functioning valves that vent the downstream vacuum or pressure when the valve is turned to the OFF position. This provides a simple, ...
DN: 4 mm
Temperature: -18 °C - 93 °C
... sensing technology • Direct valve-to-vacuum cup mount Note: These valves are designed to not seal shut completely. This purposeful small vacuum loss allows the valves to have immediate ...
DN: 10 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 60 °C
... angle seat globe valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process controller. ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 15 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 80 °C
... GEMÜ R690 2/2-way diaphragm valve has a low maintenance membrane actuator and is pneumatically operated. Normally Closed (NC), Normally Open (NO) and Double Acting (DA) control functions are available. The High-Flow ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 4 mm - 25 mm
Pressure: 0 bar - 5 bar
Temperature: -10 °C - 100 °C
The GEMÜ 660 2/2-way diaphragm valve has a stainless steel piston actuator and is pneumatically operated. The valve was designed for dosing and filling a wide range of products. All metallic actuator ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 80 mm - 250 mm
Pressure: 10, 8 bar
Temperature: -30 °C - 180 °C
Wafer type butterfly valve for installation between flanges EN 1092, PN 10, one-piece body with centring lugs, end-to-end valve stem, flat disc design with excellent flow characteristics. The setting ...
GEFA Processtechnik
DN: 200 mm - 1,000 mm
Pressure: 10 bar
Temperature: -30 °C - 200 °C
Lug type knife gate valve for installation between flanges acc. to EN 1092-1/ PN 10. Also applicable as wafer type and suitable for dead-end service. ATEX approved for category II 1D/2GD c. For granulated solids, such ...
GEFA Processtechnik
DN: 50 mm - 1,200 mm
Pressure: 10 bar
Temperature: -30 °C - 200 °C
Control knife gate valve with optimised control plate designed for precise air volume control with almost linear control function, e.g. for ventilation tasks in sewage installation plants. Lug type knife gate valve ...
GEFA Processtechnik
... conditions caused by traditional flow diversion valves, extending the life of the valve and surrounding process equipment. The W265 HTST valve assembly comes complete with 1 or 2 Microswitches ...
Pressure: 400 bar
Cylinder body made of steel, phosphatized. Remaining parts made of tempering steel. Valve seat and piston are hardened and ground. This valve is leak free. The stop valve shuts the ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining