Regulating valves

Pressure: 0 bar - 315 bar

... The type UZSZ-8 is a bleeder valve that is used to remove pressure by force in port P. It is generated by a mechanical hydraulic system. This valve is specifically manufactured for base plate installation equipped with ...

Pressure: 3,000 psi

... Model RD-900 Selector Valve - 30 GPM SPECIFICATIONS Pressure Rating Maximum Operating Pressure ........ 3000 psi Flow Rating .....................................30 GPM Filtration: For general purpose valves, ...

DN: 10 mm - 150 mm
Pressure: 160 bar - 250 bar
Temperature: 350 °C

... – shut-off globe valve with bellows (A10) and regulating globe valve with bellows (A11 rough – regulation) – forged body (lifetime up to 60 years) – non-cobalt overlay – threaded yoke – multi-layer ...

... ball valve, V-type wear-resistant ball valve, high-performance eccentric rotary valve, forged steel ball valve, special ball valve, and control ball valve ...

Pressure: 150,000 Pa - 1,000,000 Pa

... Range of Application DThis product is installed at the bottom of water cup for auto dischargers, air filters and air filter regulators and can auto discharge the condense water gathered in the water cup. Feature Auto draimer Manual Drain Air ...

DN: 0.75, 1, 1.5, 2 in

... depressurizing, venting and safe draining of piping systems. Performance is far superior when compared to conventional three valve configurations. Features/Benefits The SaVD™ Safety Seal Cap is designed to replace high pressure ...

DN: 15 mm - 100 mm
Pressure: 10 bar
Temperature: -29 °C - 180 °C

... PFA LINED, FULL BORE, DIN BALL VALVE – KTN 123T The KTN 123T is our PFA lined DIN flanged full port ball valve. The range is from DN15 to DN150. Suitable for handling large quantities of highly corrosive media thanks ...

DN: 1.5 in - 4 in
Pressure: 0.5 bar - 10 bar

... •Control of main valve: by built-in solenoid pilot valve •Applications : For water distribution, where downstream pressure should be reduced, the valve is commanded to open Description G500-PREL ...

DN: 6 mm - 50 mm
Pressure: 250, 500, 400, 315, 420 bar
Temperature: -20 °C - 100 °C

... Locking devices on request Position switches on request Detent on request ...

DN: 0.75 in - 2 in

... POL Drain Valve (DV) is a large orifice valve capable of handling large volumes of corrosive fluids via an all non-metallic wetted surface. For cost efficiency this valve is fabricated from Polypropylene ...

DN: 0.25 in - 1.5 in
Pressure: 5 psi - 150 psi
Temperature: 70 °F

... Series Pressure Regulator Valves is specifically used in pharmaceutical, landfill service, metal finishing and plating, chemical processing, and aquaculture application. It comes with a threaded type of end connection. These valves ...

... brake valves (EBV) and accessories, each optimized for specific full-power braking applications, including retarding, hill holding, ABS, traction control and stability control. MICO Electrohydraulic Brake Valves (EBV) ...

DN: 15, 20 mm
Pressure: 51 bar
Temperature: 425 °C

... accompanied by a Isolation valve for isolation to maintain/repair the trap and a Bypass valve to let out the condensate uninterrupted while the trap is being maintained. This was available in the form of a Trap Module, ...

... The Rotosphere is a metering valve that has been designed and manufactured by Sterivalves. This dosing valve is capable of operating without loss of pressure or vacuum. It is constructed in a structure that enables firmness ...

... operation is accomplished by using the geared limit switch and the torque switch inside the Limitorque, to move the poppet valve. The rotary vane air motor is compact and powerful. SMBA is ideal actuator for the use in areas not suited ...

... This type of valve is used to throttle (regulate) the fluid flow. Globe valves can also shut off the flow, but for this function, gate valves are preferred. A globe valve creates a pressure ...

DN: 15 mm - 80 mm
Pressure: 16, 25 bar
Temperature: -10 °C - 220 °C

... Three-way control valves for HVAC systems The rugged and varied three-way control valves of A. Hock’s Series 1003 can be converted from mixing version to diverting version and vice versa without any additional parts. ...

DN: 15 mm - 80 mm
Pressure: 0.4 bar - 14.4 bar

Valves for use in pharmaceutical or food industries; operated by piston or by diaphragm, different connections possible, for example with clamp connection DIN32676, male union DIN 11851, aseptic connections DIN11864

Pressure: -1 bar - 9 bar
Temperature: 0 °C - 150 °C

... Non-Intrusive Plug Valve Sampler • The plug is flush with the vessel wall when retracted. • Extracts a representative sample from the side of a vessel/dryer. • Can sample under vacuum or over-pressure • Sample Plug retracts to open ...

Pressure: 250 bar
Flow rate: 20 l/min - 80 l/min

... diverter valves and 8-way diverter valves. The 6-way diverter valves can be both single, or stackable. Our range of diverter valves cover from 20 l/min until 80 l/min, with superior curves ...

... that has clumped together in storage, dust formation, ensuring exact/calibrated quantities etc. Product range ■Flat slide valves ■Chutes ■2-way switches Properties/variants Applications For flowing or pourable bulk materials Configurations ...

Temperature: 330, 180, 265 °C

... contamination from air leaks into the valve. Reduced maintenance with extended valve lifetime Extend your treated GC valve head coating lifetime due to our reduced insert and valve ...

DN: 20, 25 mm
Pressure: 16 bar

DN: 0.125, 0.25, 0.375, 0.063 in
Pressure: 10,000, 15,000 psi
Temperature: 650, 450, 350, 200 °F

... and AF6 for on-off service and insure long life on valve seats. Regulating tip stems are available at no additional cost, add - REG to the catalog number. Glands and sleeves are supplied with each valve ...

DN: 6 mm
Pressure: 700 bar
Temperature: -20 °C - 60 °C

... Our manual valve is designed for reliable use with single or double acting hydraulic systems. If desired, it is available with a lock function for secure load holding. Technical data Mounting face Cetop C DIN 24340-A6 (others ...