{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
DN: 10 mm - 65 mm
... Parker's 3/4" Angle Seat Valve is actuated by a pneumatically driven piston and is capable to handle slurry solutions with particles or corrosive solutions at high temperature up to 180°C, operating pressures to 16 Bar and flow rates ...
Parker Hannifin France SAS
DN: 8 mm - 25 mm
Pressure: 10,000 psi - 20,000 psi
... Needle Valves, SM Series - 20,000 PSI | #20SM4071 Parker Autoclave's SM Series needle valves are a non-rotating rising stem design, with working pressures to 20,000 psi (1379 bar). Tubing sizes range from 1/4" to 1-1/2". The ...
Parker Hannifin France SAS
... COMMON OPTIONS: Since check valves and shuttles are fairly simple components, there are very few options. Here are the standard options you will find. Seals: The Winner’s Circle products feature a standard 4301 Polyurethane “D”-Ring. ...
Parker Hannifin France SAS
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 60 °C
Flow rate: 2,400, 3,800, 4,000, 10,500, 14,000 l/min
... • Poppet valve • Indirectly actuated • Brass design • In-line mounting The valve is actuated only while pilot pressure is applied. ...
DN: 14.288 mm
Pressure: 0 bar - 1,379 bar
... Actuated high-pressure control valve assembled with Parker 20SM9072-LT valve. Valve body in Stainless Steel 316, connection 9/16 in. FNPT, line size 0.5625 in, Cv 1.3 and maximum pressure ...
Rotork
DN: 14.288 mm
Pressure: 2,757.9 bar
... Product overview
- Valve: 40VM9882
- Valve manufacturer: Parker
- Valve type: Angle needle valve
- Valve material: Stainless Steel 316
- Valve
Rotork
DN: 0 mm - 10,000 mm
Pressure: 0 Pa - 689,480,000 Pa
... Product overview
Hydraulic shuttle
valve FP15/SV(Shuttle) from Bifold. Shuttle
valves select the higher-pressure input between two sources and provide reliable flow transfer with a high flow coefficient (Cv ...
Rotork
DN: 0.125 in - 1 in
Pressure: 2.5 bar - 13 bar
Temperature: -5 °C - 50 °C
... Progressive start-up valve • Available in 4 sizes with flow rates up to 15000 Nl/min and connections from 1/8” to 1” • Suitable for downstream system gradual pressurization • Downstream circuit filling time regulated via a built in ...
PNEUMAX
DN: 0.25 in - 2 in
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 150 °C
... Pad Valves offer a reliable and economic solution to fluid control. The valve is manufactured with a 2 way Bronze body and actuated pneumatically using either a single or double acting compact cylinder ...
PNEUMAX
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 50 °C
Flow rate: 2,000, 3,500, 3,800 l/min
... series, air-treatment units, PNEUMAX develops a supply and discharge valve, with an electropneumatic control and spring-return, fitted with a diagnostic system regarding the state of the valve, with the ...
PNEUMAX
DN: 6.5, 9 mm
Pressure: 400, 300, 30, 100 bar
Temperature: -40 °C - 80 °C
... Pressure reducing valves type ADC and AM are suitable for the supply of control circuits with low oil consumption. These valves feature an override compensation, i.e. acting like a pressure-limiting valve ...
HAWE Hydraulik SE
DN: 0.5, 0.75, 1 in
Pressure: 320 bar
Temperature: -40 °C - 80 °C
... flow control valve type SD, SF and SK is available as a single valve for pipe connection or as a manifold mounting valve. Pressure-limiting valves and randomly switchable ...
HAWE Hydraulik SE
Pressure: 350 bar
Temperature: -40 °C - 80 °C
Flow rate: 320, 30, 150, 75 l/min
... The load-holding valve type CLHV is suitable for applications with low and medium tendencies to oscillate and is used especially in connection with proportional directional spool valves, e.g. types PSL and PSV. It ...
HAWE Hydraulik SE
DN: 150 mm - 400 mm
Pressure: 10 bar
Temperature: -10 °C - 200 °C
... close collaboration with our customers, for challenging fields of application that simply require more than a standardised valve product. This has resulted in countless variations. Many of them have been developed to series production, ...
EBRO ARMATUREN Gebr. Bröer GmbH
DN: 40 mm - 600 mm
Pressure: 6, 10, 5 bar
Temperature: -10 °C - 160 °C
... Thanks to their design and material diversity, centrally mounted, resilient seated shut-off and control valves are almost universally usable. Whether the medium is water, powder or gas - with a broad range of materials, ...
EBRO ARMATUREN Gebr. Bröer GmbH
DN: 40 mm - 600 mm
Pressure: 10, 5, 6 bar
Temperature: -10 °C - 160 °C
... Thanks to their design and material diversity, centrally mounted, resilient seated shut-off and control valves are almost universally usable. Whether the medium is water, powder or gas - with a broad range of materials, ...
EBRO ARMATUREN Gebr. Bröer GmbH
DN: 0.2 mm - 1.5 mm
Pressure: 35 bar
... grease and oil The spray valve is a special kind of valve designed for full-surface application of greases and oils. It is suitable for both intermittent and continuous material applications. A unique feature of this ...
DN: 100 mm - 400 mm
Pressure: 0.2 bar
... VFP/VFPX Butterfly Valves can be fitted beneath hoppers, bins, silos, screw or other type conveyors, or to intercept pneumatic conveying ducts. Due to their special design material residue between valve and the connected ...
WAMGROUP S.p.A
... to abrasion as compared to traditional valves. Moreover, it avoids the use of flange gaskets. VL Slide Valves are available in a variety of configurations including rectangular sizes. In the VLQ version the valves ...
WAMGROUP S.p.A
Temperature: -10 °C - 500 °C
Flow rate: 1 m³/h - 18 m³/h
... Double Dump Valves are the ideal solution for controlled discharging of large particle size or particularly high temperature materials from silos, bins or hoppers in heavy-duty applications in virtually all industries. VDC Double Dump ...
WAMGROUP S.p.A
... The AGVB / AGVM control valves are basic and the most versatile type of control valves. Description The CV 3000 Alphaplus range of Top-guided Single-Seated Control Valves ...
DN: 8 mm - 80 mm
Pressure: 40, 63 bar
Temperature: -20 °C - 80 °C
... Actuated valves in the RV-FLUID series consist of a pneumatic rotary actuator series R4 that controls a ball or a butterfly valve. Ball valves come in the 2- and the 3-way version, with ...
DN: 6, 8, 4 mm
Pressure: 1 bar - 10 bar
Temperature: -20 °C - 60 °C
... thread and push-in fitting. The main feature of these valves is that the discharge flow can be adjusted via a pin regulator. This allows you to control the speed of the actuator connected to the valve, ...
DN: 0.25, 0.5 mm
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 70 °C
... progressive starter is a valve that regulates the flow of air until the outlet pressure reaches a certain value, at which the valve opens and allows air to flow at full rate. This valve can be used to ...
DN: 5.47 mm
... threadless, cartridge-style flow control valve is 5.5 mm in diameter and is designed for installation into metal manifolds. Functionally, a flow control valve is an orifice in parallel ...
DN: 0.25 in
Pressure: 50 psi - 5,000 psi
Flow rate: 0.01 us gal/min - 0.1 us gal/min
... This high pressure miniature pressure compensating flow control valve is only .250” in diameter and 1.38” in length. This valve provides a constant flow rate over a wide range of pressure differentials. ...
DN: 6 mm
Pressure: 210 bar
Temperature: -20 °C - 80 °C
... Industrial hydraulic valve in a high performance range. Reliable oil flow control to command value signal. Spool valve Pilot-operated Connection diagram - ISO 4401-03-02-0-05 Spool symbol ...
DN: 15 mm - 150 mm
Pressure: 100 bar
Temperature: -196 °C - 300 °C
... A range of 3-piece ball valves designed for ASME B.16.34, General Purpose and specific application requirements combined with seat and seal combinations provide customers with reliability and long service life over a broad pressure range ...
FLOWSERVE
DN: 50 mm
Pressure: 25 bar
Temperature: 1 °C - 120 °C
... as a control valve in closed circuits Technical Specifications Stroke 20 mm Leakage rate Class IV (0…0.01% of volumetric flow) Volumetric flow Vmin 5.7 m³/h Valve characteristic Linear Rangeability 1:100 Material, ...
Siemens Building Technology HVAC Products
Pressure: 0.1 MPa - 0.7 MPa
Temperature: -5 °C - 60 °C
... Your three-in-one solution • Make temporary intermediate stops – With integrated pilot check valve • Construct a safety circuit – With residual pressure release function as an option • Fit it anywhere – As small as 26.8 mm high for ...
DN: 40 mm - 150 mm
Pressure: 0 mbar - 500 mbar
Temperature: -20 °C - 450 °C
... Butterfly valves for control ratios up to 10:1, prepared for attachment of an actuator IC 20 or IC 40 and for fitting between two flanges. Features & Benefits: BVA, BVAF for continuous control ...
Honeywell Thermal Solutions
DN: 50 mm - 150 mm
Pressure: 25, 16 bar
Temperature: -30 °C - 120 °C
... Series 2-way and 3-way flanged control ball valves are used either as isolation valves or control valves in closed loop hydronic HVAC systems, with chilled water or hot ...
Honeywell Environmental & Combustion Controls EMEA
DN: 15 mm - 50 mm
Pressure: 7, 10, 25 bar
Temperature: -10 °C - 185 °C
... optical position feedback to pneumatic control and integrated fieldbus interface. Maximum service life and tightness are achieved by the proven self-adjusting v-seal packing gland. The highly integrated system of valve ...
BÜRKERT FLUID CONTROL SYSTEMS
DN: 0.25 in - 1 in
... Type - Tube Fitting Connection Size - 1/4” Connection Type - Let-Lok® Tube Fitting Body Material - Stainless Steel 316 CV - 1.2 ...
HAM-LET
DN: 7, 32 mm
Temperature: -30 °C - 260 °C
... Overview BEU Urea+ control valve is engineered for urea fertiliser and carbamate production, providing precise flow control in severe-service conditions. The internal trim and flow path eliminate ...
IMI Critical Engineering
DN: 0 mm - 10,000 mm
Pressure: 210, 320 bar
Flow rate: 250, 400 l/min
... Product type: Steering valve to control flow to/from steering cylinders on wheel loaders (used with an orbit roll or pilot valve).
Kawasaki Industrial Equipment
DN: 0.5, 0.375, 0.25 in
Pressure: 0 bar - 8 bar
Temperature: 0 °C - 40 °C
... is a line of proportional valves with pressure sensor units and digital control electronics. Valve control loop parameters can be optimized for the application with easy-to-use ...
ASCO
... Handling bleed valves (HBVs) control the outlet of bleed air from the engine and into other aircraft systems. They are primarily used for engine starting, transient bleed, and surge control. A handling ...
Parker Cylinder Division Europe
Pressure: 3.5, 1.5 bar
Temperature: -20 °C - 100 °C
... • Made of stainless steel with large free cross section and sealed gate blade • For installation between two flanges in gravity pipes at up to 1.5 barg (FUS) and 3.5 barg (FUH) • Low construction height - Application Suitable for fluid group ...
DN: 150 mm
... The Fisher Vee-Ball V150 control valve is your choice for performance and cost-effectiveness across a broad range of applications. The precision-machined parts and pressure-balanced seal designs allow smooth, precise ...
FISHER REGULATORS
DN: 20 mm - 150 mm
Pressure: 52 bar
Temperature: -60 °C - 120 °C
... motor operated valves from Danfoss ICV Flexline™ series are quick and simple to handle, install and service due to their low weight and compact design. The valve is designed to regulate the expansion process in liquid ...
DANFOSS Refrigeration & Air Conditioning
DN: 15 mm - 200 mm
Pressure: 25, 16, 40 bar
Temperature: -10 °C - 450 °C
... Service-friendly control valve to DIN/EN with flanged ends, either with linear or equal-percentage control characteristic at Kvs values of 0.1 to 630 m³/h and closing pressures of up to 40 bar; all internal ...
DN: 25 mm - 150 mm
Pressure: 6, 4, 10 bar
Temperature: -25 °C - 140 °C
... optimized valve operation Space-saving inline mounting that easily connects to the piping system High process hygiene due to the use of the same components as the EHEDG-certified LKB valve Count on the double-flanged ...
Alfa Laval
DN: 100, 80, 65, 150 mm
Pressure: 20 psi - 250 psi
Temperature: 4 °C
... Tyco® Model DPV-1 Dry Pipe Valves are differential valves that automatically control the flow of water into dry pipe fire protection sprinkler systems. These valves also provide for actuation ...
Total
DN: 3.2, 4, 6 mm
Pressure: -100,000 Pa - 1,000,000 Pa
Temperature: -5 °C - 60 °C
... 2/3-Port Mechanical Valve with One-touch Fitting VM100F ・Built-in One-touch fitting reduced installation space and less piping work ・Space saving Built-in One-touch fitting Approx. 35% reduction (25.8 mm shorter) ・Lightweight With ...
SMC PNEUMATIC
DN: 0.25 in - 1 in
Pressure: 0 bar - 1,380 bar
Temperature: 0 °C - 315 °C
... customizing of valve Positive gland locking device BuTech Medium Pressure Valves are designed for liquid and gas flow control in petroleum, chemical, power generating and general industrial applications. Available ...
Haskel
DN: 0 mm - 0 mm
... Overview
These
valves are designed to automatically drain water from components or
valves that are normally dry, such as alarm lines,
control
valves at hose stations, dry standpipes, ...
DN: 0.125 in
Pressure: 0.5 bar - 3 bar
Temperature: 0 °C - 50 °C
... Applications
- Pressure reducing valves (e.g. low-pressure irrigation using lay-flat)
- Flow control valves (Differential Pilot: PC-SD-A-P, sealed cover)
- Differential pressure
BERMAD CS Ltd
DN: 1 in - 4 in
Pressure: 10,000 psi - 20,000 psi
Temperature: -29 °C - 121 °C
... Plug Valve is an important high pressure part for well service to allow and stop flow by plug rotation. Jereh plug valves are made from premium alloy steel, with special coating and heat treating process which greatly ...
Yantai Jereh
DN: 0 mm - 10,000 mm
Flow rate: 0.5 l/min - 540 l/min
... Respiratory care systems (ventilators, CPAP/BiPAP)
Key features
- Wide
DN: 40 mm - 100 mm
Pressure: 73, 145, 87, 116 psi
Temperature: 275, 284 °F
... Valves / Mixproof Valves The DT4 tank outlet mixproof valve is used for the reliable separation between the tank and servicing pipeline. The DT4 tank outlet is an extension to the D4 Series mixproof ...
Waukesha Cherry-Burrell
DN: 10 mm - 100 mm
Pressure: 10, 16, 6 bar
Flow rate: 40 l/min - 11,000 l/min
... protection. Lever The ergonomically designed lever allows easy and precise operation. To protect against unintentional or unauthorized operation Electrical Feedback The optional LED position feedback allows the ...
GF Piping Systems
DN: 0.25 in - 1.5 in
Pressure: 0 bar - 690 bar
Temperature: -40 °C - 74 °C
... 30 Series shut-off valves are high pressure, high flow applications up to 10000 psig / 690 bar and offer Cv = 0.28-20.0. The 30 Series offer globe and angle pattern bidirectional flow, soft seat and built-in metallic stop. Ideal for use ...
Emerson Automation Solutions - TESCOM
DN: 40 mm - 100 mm
Pressure: 73, 145, 116 psi
Temperature: 0 °F - 275 °F
... fluids. Valve System Overview High Value, Low Life Cycle Costs Pig use enables valuable product recovery Pig use decreases downtime related to cleaning, and reduces wastewater and CIP fluid costs Shared seal kit for 1.5” ...
APV
the best suppliers