- Hydraulics - Pneumatics >
- Pump >
- Industrial pump >
- Weir
Weir industrial pumps
Flow: 0 m³/h - 11 m³/h
Pressure: 0 bar - 16 bar
Head: 47 m - 120 m
... controlled by CM control module. - Multistage pump made of AISI 304 stainless steel. An inverter allows 4HS to: - Change pump speed to maintain set-pressure regardless of water demand. Consequently ...
Flow: 31 m³/h
Pressure: 8 bar
Head: 62 m
Wide range of pumps for domestic and industrial applications.
LOWARA
Flow: 0.6 m³/h - 158.9 m³/h
Pressure: 0 bar - 16 bar
Fluid temperature: -10 °C - 140 °C
... designed lobes. The pump is authorized to carry 3-A symbol. Note: Consult the options of the pumps authorized to carry 3-A symbol. The SLR pump is a bare shaft rotary lobe pump. ...
INOXPA
Flow: 1,000 m³/h
Pressure: 10 bar
Head: 295'00"
The DIN-FOOD pump is a hygienic high capacity centrifugal pump (up to 1000 m³/h) designed to cater for an unfulfilled need in the food-processing and chemical and pharmaceutical industries. The applications ...
INOXPA
Flow: 2.4 m³/h - 45 m³/h
Pressure: 12, 6 bar
Fluid temperature: 85 °C
Kiber KS progressive cavity pumps are used to transfer products of low and high viscosity as well as products containing soft particles. They are also recommended for use with edible oils, wine, concentrates and beverages ...
INOXPA
KGL series servo screw platen pump realizes precise glue supply and metering of the system based on the technical principle of eccentric screw valve, and is suitable for various single and two-component glues from high ...
... saving and noise reduction Compared with the traditional pneumatic platen pump, the servo screw platen pump can save energy by more than 300%. The servo screw platen pump runs more ...
Flow: 104 m³/h
Head: 36 m
Power: 7,500 W
• PP materials, PVDF • Connections DIN EN ISO 9906 Dry-run safe close coupled sump pump Highest operational safety because of bearing-less design partly suitable for particle loaded fluids Tailor-made mounting plates ...
DIVATEC,SL
Flow: 80 m³/h
Head: 27 m
Power: 180 W - 7,500 W
... seals • Materials PP-GF, PVDF • Height up to 65m • Engine coated corrosive EPOXI paint Type of construction • Horizontal pump with hermetic seal and magnetic coupling, with special bearing pair, suitable for dry ...
DIVATEC,SL
Flow: 1,000 m³/h
Pressure: 16 bar
• PP, PVDF, PTFE materials • For large pumps • PN16 • ISO 2858 / DIN EN 22858 connections • For fluids with solids X-CLASS is the beginning of a new generation of powerful heavy-duty plastic pumps. Based ...
DIVATEC,SL
ALLDOO Micropump | Micro Diaphragm Pumps
... ,12VDC and 24VDC micro diaphragm vacuum pumps,gas pumps,water pumps,self priming liquid pumps and long lasting DC brushless motor micropumps,provides ...
ALLDOO Micropump | Micro Diaphragm Pumps
Flow: 5 l/min
Pressure: -700 mbar - 2,000 mbar
Length: 30 mm
CMP30 vacuum(air,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors. Technical Features: 1.Uncontaminated ...
ALLDOO Micropump | Micro Diaphragm Pumps
air MAGNETIC DIAPHRAGM pump Spec Type:Aeration Pipe,Areator,Other air pump:air MAGNETIC DIAPHRAGM pump Key Features * Low Noise * High Durability * No Lubrication Necessary * ...
Mohno screw pump Key Features Working Principles: Mohno Pump is a container type pump with a single shaft , turning eccentrically; it is composed of a rotor and a stator. The rotor ...
CEMO
Hand pump 25 l/stroke Order-number: 1452 Details Hand pump, accessories for UNI- and MULTI-Tank, pumps and accessories specially adapted for DWT diesel filling stations -robust ...
CEMO
Steel drum-pump Order-number: 7892 Details Hand pumps for diesel and lubricants -robust construction -no energy source required -low-cost -2” connector -suction tube can be ...
CEMO
Power: 1,400 W
Length: 195 mm
Width: 195 mm
Magnetic pump • Total dimensions L x W x H: 195 x 195 x 355 mm • Power: 1400 W • Alloy capacity: 8 Kg • Maximum PCB dimensions: 160 x 500 mm • Maximum temperature: 300 ° C • Heating time: 1h Pot of ...
HIGH VISCOSITY MATERIAL FEEDING PUMP THIN MEDIUM FEEDING PUMP SANITARY FEEDING PUMP HEAT PRESERVATION SLEEVE DESIGN WATER CLEANING MECHANICAL SEAL AVAILABLE ALMOST HAVE ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Lobe pump is widely used to transfer high viscosity liquid and semi-solid liquid. Lobe pump can transfer sauce, cream,food, cosmetic, pharmaceutical liquid,mayonnaise,syrup,meat paste and so on. Rotor ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Stainless steel pneumatic diaphragm pump Brief introduction The stainless steel pneumatic diaphragm pump uses compressed air as the power source, which can be used in various complex working conditions ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 0.5 l/min - 12 l/min
Pressure: 20 bar
Power: 1.8 kW
The m-tec speedy-MP is an easy-to-handle pump for processing soft materials or pumpable products such as structured or decorative renders with a granularity of up to 2 mm. It is mainly used to pump creative ...
M-TEC Mathis Technik
Flow: 3 l/min - 22 l/min
Pressure: 30 bar
Power: 4 kW
The m-tec P20 is a compact pump for processing soft materials or pumpable products with a granularity of up to 4 mm. The P20 is mainly used to pump basic, decorative, synthetic resin ...
M-TEC Mathis Technik
Flow: 3 l/min - 24 l/min
Pressure: 30 bar
Power: 4 kW
... m-tec m-tec pump is the perfect entry-level model for the automation and automation and 3D printing sector. Advantages Easy adaptation to different materials due to infinitely variable power control Problem-free ...
M-TEC Mathis Technik
Flow: 35 l/h
Pressure: 903 bar
The “V” Series pump is a range of compact, self-contained, pneumatic metering pumps suitable for injecting a wide variety of chemicals that range from 0.07 gph to 9 gph (0.27 lph to 34 lph) and pressures ...
Williams Milton Roy
Flow: 111.66965, 2, 5 l/h
Pressure: 3,000, 2,500, 1,600 psi
Weight: 12.2, 55.1, 62.1 kg
WILROY Series Hydraulic Diaphragm Pump The WILROY metering pump is a unique blend of Williams and Milton Roy pump technology The WILROY is a pneumatic-hydraulically actuated diaphragm ...
Williams Milton Roy
Flow: 2.8 l/h - 170.3 l/h
Pressure: 5.17 bar - 6.54 bar
Weight: 2.7 kg - 5.2 kg
Low Pressure Diaphragm Pumps The CLD Pneumatic diaphragm metering pump consists of a liquid chamber and an air chamber separated by a diaphragm The CLD is a pneumatic driven low-pressure diaphragm ...
Williams Milton Roy
Head: 60 mm - 260 mm
Power: 250, 120, 60, 180 W
... ) : 60 • Weight (Kg) : 2 • Packaging (mm) : 25X25X30 • Draught (mm) : 60 The continuos service self-priming electric pumps are suitable for continuos coolant flow and assure absolute operating safety even at high temperatures.
Flow: 0.8 l/min - 5 l/min
Fluid temperature: 0 °C - 45 °C
Length: 112 mm
... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling ...
Casella
Flow: 2 l/min
Length: 112 mm
Width: 37 mm
... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling ...
Casella
Flow: 1 l/min - 300,000 l/min
Length: 112 mm
Width: 37 mm
... that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling ...
Casella
Pressure: 10 bar
Fluid temperature: 60 °C
Weight: 600, 720 g
A, AD Type Modern and compact oil burners pump, designed to pump fuel from the tank to the burner nozzle, at the required pressure. The A – AD type pump is made of a ...
Elettromeccanica Delta S.p.A.
Flow: 1 m³/h - 66 m³/h
Head: 3.5 m - 114 m
Power: 0.37 kW - 9.2 kW
... centrifugal pumps; electric motor with extended shaft directly connected to the pump. NM: single-impeller. NMD: with two back-to-back impellers (with axial thrust balancing). Connections : threaded ports ...
Calpeda
Specifically suited for transferring toxic, dangerous and WHC goods. These magnetically coupled pumps are designed for applications with special safety requirements. The open impeller is connected to the driving unit ...
FRISTAM
Flow: 0 m³/h - 80 m³/h
Pressure: 0 bar - 28 bar
The Fristam Centrifugal pumps FM enable effortless pumping at high pressures. They are designed to suit higher pressure loads. Technical briefs: The pumps are manufactured in three sizes that last ...
FRISTAM
Flow: 20 m³/h - 180 m³/h
Pressure: 20, 25 bar
When developing this exceptional pump, we intended to set new standards in double-screw technology. We started by rethinking functional principles from the ground up and eliminated previously known deficiencies typically ...
FRISTAM
Hypro centrifugal pumps handle big, high-capacity spraying jobs with ease. Use them for spraying liquid fertilizers and other chemicals, including wettable powder slurries for weed control. Make short work of other jobs ...
Hypro Pressure Cleaning
... Self-Priming Centrifugal Pumps, 140 GPM max Pentair Hypro self-priming centrifugal pumps handle big, high-capacity spraying jobs with ease. They offer outstanding performance without the need for a flooded ...
Hypro Pressure Cleaning
... high-powered, self-priming transfer pump achieves up to 200 gpm (757 lpm) and 58 psi (4.0 bar). The series includes 1542P-55SP, 1542P-65SP, 1542P-65ESP, 9342P-HM1C-5SP, and 9342P-HM5C-5SP. Key Features Close-coupled, ...
Hypro Pressure Cleaning
Flow: 1,700 us gal/h - 8,000 us gal/h
Rule your dewatering! Backed by the Rule brand of DC pumps, a brand enjoying over 45 years of operational excellence, the Evacuator series is a new line of high efficiency portable utility pumps. Providing ...
RULE INDUSTRIES
Flow: 10 m³/h - 20,000 m³/h
Head: 3 m - 300 m
PRODUCT FEATURES Expect more with the improved design and above standard, standard materials options of the e-XC split-case pump: Xylem's proprietary mechanical seals - carbon/silicon carbide seal with an EPDM elastomer ...
Jabsco
Pressure: 275 bar
Ideally suitable for the automatic grease lubrication of all types of industrial machines and as a chassis lubrication pump for trucks, trailers, buses, construction and mechanical handling vehicles. ...
I.L.C. srl
Flow: 30, 40, 85, 150 m³/h
Pressure: 9, 12 bar
WANGEN BIO-MIX pumps have been integrated for many years in the energy production process and undergone continuous further development and optimization. They are suitable for conveying maize silage, grass silage, GPS, ...
WANGEN Pumpen
Flow: 0 m³/h - 560 m³/h
Pressure: 0 bar - 12 bar
Thanks to the vertical construction form, the WANGEN KL-T / KB-T has only a small space requirement. The consistent diameter of the joint connections ensures constant flow speeds and reduces the sensitivity to foreign ...
WANGEN Pumpen
Flow: 0 m³/h - 100 m³/h
Pressure: 0 bar - 80 bar
... pharmaceutical and cosmetics industry. Low-impact delivery of products containing solids. CIP and SIP cleaning is possible, the pump is available as a mobile or stationary unit. Benefits and Characteristics ...
WANGEN Pumpen
Flow: 0 m³/h - 120 m³/h
Head: 0 m - 58 m
Power: 4, 3 kW
... centrifugal pumps of the series SM are single-stage horizontally mounted pumps. Because of their robust and durable design the SM pumps can be used in a wide variety of applications. ...
SCHMALENBERGER GmbH + Co. KG
Flow: 0 m³/h - 0 m³/h
Head: 0 m - 38 m
Power: 3, 4 kW
... without costly and time-consuming chip crushers in conjunction with lifting systems. The SZcut combines a proven centrifugal pump design with a cutting element and optimises the difficult transport of aluminum chips in ...
SCHMALENBERGER GmbH + Co. KG
Flow: 0 m³/h - 450 m³/h
Head: 0 m - 100 m
Power: 4, 3 kW
Standardized centrifugal pumps type NB are single-stage horizontally mounted pumps. They are characterized by a maintenance-friendly design and can be used in a wide variety of applications. 18 sizes ...
SCHMALENBERGER GmbH + Co. KG
Flow: 0.03 m³/h - 180 m³/h
Pressure: 24 bar
PCM Ecomoineau™ M is the most compact progressing cavity pump (PCP) available on the market today. Its revolutionary design combines the legendary performance and reliability of PCM PCP technology with ...
PCM
Flow: 1 m³/h - 100 m³/h
Pressure: 0 bar - 260 bar
PCM pumps are easy to order, delivered fast, simple to operate and incredibly reliable. PCM Oil & Gas transfer pumps combine the legendary performance and reliability of PCM progressing ...
PCM
Flow: 0 m³/h - 55 m³/h
Pressure: 0 bar - 24 bar
... progressing cavity pump is a culmination of our unrivalled industry expertise and our unwavering commitment to provide the best fluid handling solutions. PCM Moineau™A pumps meet all ...
PCM
The external gear pump with innovative hygiene concept Dead space free and maintenance free. The rinsing concept ensures maximum hygiene and optimized cleaning cycles. The selected materials guarantee a long service ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining