DN: 50.8, 76.2, 127, 38.1 mm
HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize ...
DN: 1.5 in - 8 in
Pressure: 0 psi - 5 psi
Flow rate: 0 us gal/min - 2,000 us gal/min
HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize ...
DN: 0.25 in - 1 in
Pressure: 0 psi - 5,000 psi
Temperature: 70 °F - 1,200 °F
... Tantalum, and other exotics with various trim sizes for every valve measure and incorporate an exact precise control. It is available in globe, angle, 3-way, sanitary, and cryogenic designs. This valve ...
Badger Meter
DN: 25 mm - 500 mm
Temperature: -198 °C - 593 °C
Metso’s Neles globe valves designed to provide the best possible control accuracy and wide rangeability with economical high-performance. Standard units are equipped with linear actuators and ND9000 intelligent ...
Metso Automation
DN: 20 mm - 100 mm
Pressure: 25 bar
Nominal diameter DN 20...100 Nominal pressure PN 16. 25 Three-way design with short B -flange Spindle packing with chevron rings or long life torsion safe chambered bellows seal Easy to change the actuator orientation for operation and cabling access
RTK Regeltechnik Kornwestheim
DN: 12, 16, 20, 25, 40 mm
Pressure: 420 bar
Temperature: -25 °C - 200 °C
... placed and held, leak-free load-control valves from the CINDY series are the right solution. Load-control valves in this series prevent hydraulic actuators from running ahead of the available oil supply. ...
DN: 2.5 mm
Pressure: 2 bar - 10 bar
Temperature: 0 °C - 60 °C
Microvalves with plug button 3/2 NO or NC with several actuation options, mechanical or manual. Thanks to the usage of the adaptor all actuators can be mounted on microvalves and it is also possible to combine two microvalves to obtain ...
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 70 °C
The quick exhaust valve allows to exhaust the air in the cylinder to increase the speed. We suggest the mounting directly on the cylinder’s supply
Pressure: 210 bar
Flow rate: 20 l/min
The Leak Free Solenoid Valve is specifically designed to provide a good quality performance and functionality. It is built with a sub-plate or screw-in, two-way, poppet style normally used to cut off the hydraulic power. ...
DN: 6 mm - 250 mm
Operation switching components compatible in a wide range of fields using the air supply (no power supply needed) in the 4KB Series. [Compatible cylinder] Dia.6 to Dia.250
DN: 5 mm - 12 mm
Pressure: 0 bar - 12 bar
Temperature: -20 °C - 70 °C
Valves series “CA” are produced in the 3/2, 3/3, 5/2 and 5/3 pneumatic functions. The poppet kind of construction and the very rugged control allow the valve to stand high stress. The push-botton and ...
Pressure: -1 bar - 10 bar
Temperature: -20 °C - 200 °C
In-line Valves • Extracts a liquid sample from pipeline. • Installed on Horizontal or Vertical pipeline. • Sample is representative. • All wetted parts are made from corrosion resistant materials. Materials of ...
... operation is accomplished by using the geared limit switch and the torque switch inside the Limitorque, to move the poppet valve. The rotary vane air motor is compact and powerful. SMBA is ideal actuator for the use ...
DN: 3, 0, 4 in
Pressure: 230 mbar - 8,000 mbar
Temperature: -20 °C - 40 °C
... . 10/520 19/03/1955 and subsequent amendments. Valve is used to prevent any possible overfill during charging hazardous or dangerous fluids. Application: petrochemical. food. pharmaceutical & more. Valve ...
Ridart srl
DN: 3, 4 mm
Pressure: 230 mbar - 8,000 mbar
Temperature: -20 °C - 60 °C
... 520 19/03/1955 and subséquent amendments. Valve is used to prevent any possible overfill during charging hazardous or dangerous fluids. - Application: petroc hernie al. food. pharmac eutic al & more. - Valve ...
Ridart srl
DN: 3 in
Pressure: 230 mbar - 8,000 mbar
Temperature: 60 °C
... /EU. ISO EN 13616-1, Technical Norm Fire Prévention 41/256 31/10/2019. d P.R. 10/520 19/03/1955 and subseguent amendments. Valve is used to prevent any possible overfill during charging hazardous or dangerous fluids. - ...
Ridart srl
DN: 50 mm - 600 mm
Pressure: 16 bar - 420 bar
Cast steel globe valve product overview:Athena globe valves are torque seated valve which are used for on-off service as well as for throttling purpose. ...
Athena Engineering S.r.l.
Pressure seal type globe valve product overview:Athena pressure-seal valves are designed based on API/BS and ASME B16.34. They're widely applied within high temperature and high pressure ...
Athena Engineering S.r.l.
Globe valve for oxygen service Athena Oxygen valves are made of Monel 400. They have the advantages of high mechanical strength, wear resistance and good safety. Used on oxygen pipeline, ...
Athena Engineering S.r.l.
DN: 150 mm - 180 mm
AWF
DN: 6.35 mm
Pressure: 0 psi - 150 psi
AWF
... making the primary seal on the precision formed tapered seat. For replacement Viton® O-ring Kit, see R110112.0-12mm high vacuum valve(T-Type) Accessories: S540012 0-12mm high vacuum plug and control knob Viton® O-ring at tip 42.05
Synthware glass
DN: 9 mm
VALVE, HIGH VACUUM, PTFE, O-RING, THREE-WAY With two 9mm O.D. sidearms sealed to the barrel at a 90® angle to one another. The non-rotating PTFE plug has three O-rings, the tip O-ring making the primary seal on the ...
Synthware glass
DN: 9 mm
... primaryseal on the precision formed tapered seat . For replacement Viton® O-ring Kit, see R7010,or R108110.0-8mm high vacuum valve ,180° Accessories: S540004 0-4mm high vacuum plug and control knob Viton® O-ring at ...
Synthware glass
DN: 15 mm
Pressure: 150 bar
Temperature: -29 °C - 120 °C
Forged Steel Globe Valve Manufacturer: Forging Steel Globe Valves, 1/2 Inch, DN15, Class 800 LB, PN150, API 6D. Standard: API 6D. Face to face: ASME B16.10. Test ...
China MED Valve Co., Ltd.
DN: 15 mm - 600 mm
Pressure: 16 bar - 420 bar
Temperature: -29 °C - 560 °C
DIN GS-C2 Angle Globe Valve Fabricator: DIN 3356 Globe Valves, DIN GS-C2, 4 Inch, DN100, Class 300 LB, PN50, Flanged RF Ends, Test EN 12266-1/2. Design standard: DIN ...
China MED Valve Co., Ltd.
DN: 2 in - 16 in
DBB Expanding Plug Valve Provider: Double Block and Bleed Plug Valves, 2-16 Inch, Class 150-600 LB, API 6D, ASME B16.34, API 599, Full Venturi Port, Blowout-proof Stem. Expanding plug valve, ...
China MED Valve Co., Ltd.
DN: 50 mm - 800 mm
Pressure: 25, 40, 10, 16 bar
Di Nicola manufactures hydraulic control globe valves for upstream and downstream pressure regulation , flow regulation and level control in tank . The body is made of ductile iron EN GJS 400 or carbon ...
DN: 3.88 in
... standard GURU® Plug. This thermostatic drain valve responds to the engine coolant temperature and will pop open to rapidly drain the system before freeze damage can occur when the coolant reaches the valve’s ...
Pressure: 207 bar
Temperature: 121 °C
... otherwise be harmed by high temperature samples. The valve responds only to temperature. Under normal operation the valve is fully open. If the sample temperature reaches 120°F, the thermal element within ...
DN: 10 mm - 50 mm
Pressure: 63 psi
Temperature: -328 °F - 392 °F
The main function of the 2140 shut-off valve is the controlled opening and closing of pipeline sections via the valve seat integrated in the body. Due to the use of high-quality materials, the fitting ...
Goetze KG Armaturen
DN: 6, 8 mm
The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. ...
DN: 15 mm - 250 mm
Pressure: 0 bar - 10 bar
VSG VSG type is a globe valve for gas suitable for inline installation and end-of-the-line mounting. The inner globe is manufactured with a full and straight gas passage that results ...
AB-Cocks are simple constructed, robust shut-off cocks which are specially designed for the measurment engineering. Due to their reliability and economic efficiency they are applied by the million. Operating Principle AB-Cocks A cylindrical ...
... design isolates working parts and top-works from fouling or corrosive service, and nullifies the effects of back pressure on valve performance. The “D” to “T” orifices meet API Standard 526 covering orifice areas and ...
Injection control valve Tasks Injection control valves are primarily flow control valves, which means they supply the required amount of cooling water to the point of use. The pressure ...
Level control valve Tasks One of the functions of condensate (level) control valves is to control the level of accumulated condensate and discharge it to the main or auxiliary condenser. Different types ...
Please specify:
Help us improve:
remaining