- Hydraulics - Pneumatics >
- Valve >
- Manual valve >
- Weir Power & Industrial
Weir Power & Industrial manual valves
IVEK’s Ceramic Liquid Valves offer a durable high-performance alternative to “plug valves” commonly used in instrumentation Traditional polymer valves have a limited life due to material ...
DN: 65 mm
The water stop valve is used to stop water of fire hose, controlled by ball valve, easy to operate with its strong practicality, light weight. It can block the water flow quicky when the fire hose bursts, ...
DN: 1, 2 in
Pressure: 2,500 psi
Temperature: 260 °C
... service time, thanks to top entry design and easy-to-service-seat Design offers choice of angle and globe valves Standardised 1" and 2" valves with variable trim options Choice of materials for body, ...
DN: 6 mm - 28 mm
Pressure: 414 bar
Temperature: -54 °C - 316 °C
Needle valve is a fine-tuning valve with a needle-shaped valve plug, which is mainly used to adjust the air flow. The fine-tuning valve requires the valve ...
Jiangsu Deenpu Petrochemical Machinery Co.,Ltd
... systems. They are normally operated remotely by air cylinders, electric or pneumatic actuators, although manual versions through the customary hand lever, handwheel and reduction gearboxes can be accommodated.
ROTOLOK
DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 60 °C
Dueker gate valves – for water and gas.Reliable, safe and cost-effective. Dueker gate valves are used to great effect all over the world. There is a good reason for this – valves have ...
Düker GmbH
DN: 50 mm - 350 mm
Pressure: 1.6 MPa
DCL series high vacuum ball valves are widely used for silicon panel production equipments in Solar energy industry and semiconductor industry. Valves can be used for pipe pressure from 105Pa to 1.3*10-4Pa ...
PTFE high vacuum valve The properties of high vacuum and PTFE rubber O-rings at the top could arrive at the perfect effect of high vacuum and corrosion resistance. PTFE high vacuum rod with PTFE rubber O-ring YZ0501 ...
DN: 40, 50 mm
Butterfly valve No.1 ----Aluminum alloy interface butterfly valve Model Number:DN40 - Application:General - Material:HDPE Temperature of Media:Normal - Pressure:Medium Pressure - Power:Manual Media:Water ...
Wenzhou Sanlo International Trade Co., Ltd.
Depending on the version, the 5A venting valve is suitable for venting harmless gases, for drawing off aggressive media or for special drainage on manifolds. Important for the application: The valve is ...
EM-Technik GmbH
Pressure: 0 bar - 16 bar
Temperature: 50 °C
Flow rate: 1,570 l/min
The block device is particularly useful during maintenance operations. It prevents the system from being accidentally or wrongly pressurized. It can be wall mounted using the relative holes. Discharge connection: G 1/8”. Maximum inlet ...
Aircomp by Stampotecnica
The G84(5)F-10P/R manual three-way diaphragm valve has a maximum working pressure of 10 bar (in EPM or FPM) or 6 bar (in EPDM) and a maximum working temperature of 150℃. It features a tri-clamp and welding ...
Zhejiang Kangsaite Valve Co., Ltd.
DN: 50, 20, 25, 40 mm
Pressure: 15 bar
Temperature: -20 °C - 80 °C
... outside, fittings are made of robust cast aluminium, painted in grey, with durable Nitrile gasket seals, pipe, fittings, and valves are available silicone-free.
DN: 5 mm - 38 mm
Pressure: 350, 400, 500 bar
Temperature: -20 °C - 100 °C
Body, Connecting Parts, Ball and Stem Stainless Steel, V4a (AISI 316) Each PH ball valve is subject to an inspection for resistance, sealing and special characteristics. Inspection control certificates 3.1 B or 3.1 ...
PH Industrie-Hydraulik GmbH & Co. KG
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 180 °C
Flapcon® BA102 Series Monoblock flanged ball valves are manufactured from cast iron, cast steel and stainless steel castings. Thanks to full-bore ball construction, they provide high capacity permeability. Due to the ...
FLAPCON VALVES AND AUTOMATION SYSTEMS CO LTD
Flow rate: 2 l/h - 15 l/h
... 4 –20 mA proportional control input V-notch precision rate valve Modbus Communication High quality stepper motor 5-POINT valve calibration Led indication of the valve position MANUAL ...
DN: 25 mm - 600 mm
Pressure: 0 bar - 16 bar
Temperature: -30 °C - 200 °C
... seats of double eccentric high performance valves today,butterfly valves are used from basic water applications to industrial applications and highly corrosive severe service applications Butterfly ...
Doruk Endustri Ltd.
DN: 6.35 mm - 25.4 mm
Pressure: 300, 350 bar
Flow rate: 200, 120, 60, 90 l/min
4 ways inverter valve, cast iron painted body. Zinc plated stem. Available in 1/4 – 3/8 – 1/2 – 3/4 – 1G both open and closed center.
DN: 0.25 in - 8 in
Pressure: 150 psi - 4,500 psi
Temperature: -254 °C - 1,038 °C
The HI-100® Control Valve features an in-line Straight-thru, venturi flow design. The control element, a spherical ball, is contained by a cage that positions the ball relative to the downstream seat by means of linear ...
DFT Inc.
DN: 0.25, 0.125 in
Pressure: 1,000,000 Pa
Temperature: 0 °C - 120 °C
... offers simple-type, precision-type and various other needle valves, and also manufactures flow controllers having a combination of a needle valve and diaphragm as well as proportional solenoid valves ...
KOFLOC Corp.
DN: 6 mm - 16 mm
Pressure: 45 bar
Temperature: -40 °C - 130 °C
Check valves and stop valves are designed for installation on commercial refrigeration systems and civil and industrial air conditioning systems employing the following refrigerants: R22, R134a, R404A, ...
DN: 20 mm - 110 mm
Pressure: 10, 16 bar
... Ball Valve For Water Supply Application area 1. water supply 2. irrigation, swimming pool, agiculture 3. wastewater treatment 4. chemical industry Description: - Name of Items - PVC Socket True Union Ball ...
Huasheng Pipeline Technology Company
COMAP SRL
DN: 25 mm - 65 mm
... factory assembled and tested stainless steel or bronze ball valve,stainless steel hydraulic actuator to the ball valve.The actuator has a position indicator for manual reset.
Shenzhen Winan Industrial Development Co., Ltd.
DN: 15 mm - 100 mm
Pressure: 8, 10 bar
Temperature: 80, 150 °C
Non rising hand wheel with optical indicator Flexible diaphragm suspension Encapsulated diaphragm CDSA sealing concept
SED Flow Control GmbH
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining