- Hydraulics - Pneumatics >
- Valve >
- Sludge valve >
- Weir
Weir sludge valves
DN: 50 mm - 1,200 mm
Pressure: 4 bar - 10 bar
Temperature: -30 °C - 200 °C
V305 series slurry knife gate valves are designed specifically for heavy duty conditions in the mining industry. 2 steel ring reinforced elastomer ring insulates the inner part of the valve from the ...
Doruk Endustri Ltd.
DN: 0.5 in - 6 in
Pressure: 150 psi - 2,500 psi
Temperature: -20 °F - 1,000 °F
... spherical ball. These basic features enable the valve to operate smoothly and efficiently at high or low temperatures and in slurries. The ball, cage and stem can be easily replaced in-line without removing the valve ...
... former DIN 25011. ANS1150 on request MEDIA Liquid and pulverised media with fibre parti- cles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request) Not suitable for steam BODY • ...
DN: 50 mm - 1,000 mm
Pressure: 6, 16, 25 bar
The TL model knife gate is a through conduit wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or reverse flow. The valve ...
ORBINOX
Pressure: 0 bar - 16 bar
Our range of general purpose Butterfly Valves have been designed to provide a cost effective solution to your flow control and product shut-off requirements. Available in sizes from 50mm to 1000mm bore. Suitable for ...
Mucon
... close the valve. The sleeve’s flexibility allows the valve to close drop-tight around entrapped solids, eliminating hang-ups that can damage the valve. Sealing area is equal to 95% ...
Red Valve
DN: 8 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 150 °C
... industrial control valves, has a full range of industrial control valve solutions that continue to provide the most competitive control valve products to customers worldwide. We provide ...
SuZhou KoSa Environmental Protection CO.,LTD
DN: 50 mm - 600 mm
Pressure: 16, 10 bar
Slurry Knife Gate Valve Body: Ductile Iron, Carbon Steel Stem: F304, F316 Gate: F304, F316 Stem Packing: PTFE, Graphite End Connection: Wafer, Lug Standard Compliance MSS SP-81, T 8691 Face to ...
Segment ball valve (V–Notch Ball Valve) is a throttling control segmented ball valve that provides high flow capacity with optimum characteristics for industrial markets including Pulp ...
HEFEI AFC INTERNATIONAL TRADE CO., LTD.
... provides for a more stable concentration of sludge to the sludge thickening system and to reduce the amount of flocculent.
DN: 25 cm - 100 cm
Pressure: 16, 40 bar
Temperature: -29 °C - 180 °C
The KTN 121LT is our 3-way, full bore, DIN flanged ball valve. The range comprises from DN 25 to DN 100, varying its floating valve design from DN 65 where the sphere is guided for better performance, ...
KTN
DN: 50 mm - 2,000 mm
Bidirectional knife gate valve. The valve body is composed by two body parts that are bolted together. This valve is bidirectional with equal maximum Dp resistance from both flow directions. ...
C.M.O.
DN: 1 in - 2.5 in
TECVAL Boiler Blowdown Valves blow down sludge formed in steam boilers. Devices in grey iron or steel, sizes range from 1" to 21/2", threaded or flanged, with a quick, slow, or automatic opening mechanism.
DN: 80 mm - 200 mm
Pressure: 10 bar
Temperature: 60 °C
The Ramén KSG Ball Sector Valve is a rubber lined control valve that offers extended resistance to wear in various industrial applications containing abrasive particles. All wetted parts (body, ball sector ...
DN: 0.5 in - 3 in
Pressure: 125 psi
Temperature: -40 °F - 275 °F
The Series 22 Dia-Cam Pinch Valve is a high flow capacity pinch valve with a flow-thru design to handle fluids like slurries. It only has one wet part, the PTFE-lined Diaphragm Spool.The valve ...
DN: 5 in - 72 in
Pressure: 150 psi - 450 psi
Temperature: 150 °C
... corrosion-resistant nickel seat and variety of end styles are available. Ecccentric Plug Valves are capable of handling clean and dirty liquids and gases, sludges and slurries.
DeZURIK
DN: 25 mm - 500 mm
Pressure: 1.6 bar - 42 bar
Temperature: -196 °C - 650 °C
R5 series three piece ball valve are of fixed ball structure. Through the design of the flow pass, the fluid pressure loss is reduced to a minimum level. Typical application: shutting off service of liquid, gas and slurry. Soft ...
Wuxi Smart Auto-control Engineering Co., Ltd.
DN: 80 mm - 600 mm
Temperature: -46 °C - 593 °C
Lock Hopper Ball Valve Product type On/off valve Valve Type Lock Hopper Ball Valve Model Q*49H Size NPS 3~NPS 24 Operating temp. -46℃~593℃ Seal ...
FLUSHING VALVE Flushing valve FLX constructed in cast iron, to be installed directly on the pump casing by means of a threaded coupling. This type of valve operates on the "Venturi" principle ...
DN: 160, 110, 200 mm
We offer a range of manual valves (knife gate valves) for piped slurry systems, which fit standard PVC pipe diameters of 110, 160 and 200 mm. All valves are in acid-proof stainless ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining