Witte Pumpen electric pumps

Power: 7 kW - 21 kW

... atmospheric pressure state. Emergency manual operation is available . (needs not by-pass line) Body:SCS13A, Ball:Durability is good and strong against corrosion by using SUS304 quality of the material. Switching time ...

Flow: 0 m³/h - 10.8 m³/h
Head: 20 m - 92.5 m
Power: 0.55 kW - 5.5 kW

... not higher than 80°C. PUMP: Horizontal axis pump with bronze closed impeller, pump body and base support made of G20 cast iron, AISI 304 stainless steel shaft and mechanical seal made ...

Flow: 2.4 m³/h - 6.5 m³/h
Head: 0 m - 7 m
Power: 0.32, 0.2 kW

The pump for residential drainage Cooling jacket for motor housing Low level pumping by detachable strainer base Flushing device activatable and deactivatable Variable discharge branch with closable ...

... CLOSE-COUPLED CENTRIFUGAL PUMP WITH HIGHEST EFFICIENCIES DESCRIPTION Highly efficient single stage centrifugal pumps with 100% coating (internal and external) to protect against corrosion! Highest ...

Carbon black feeding pump, independently researched and developed by Doright, is a new product of improving feeding stability of carbon black granulator. Carbon black feeding pump is consisted of ...

Flow: 80 l/min - 660 l/min
Pressure: 20 bar - 25 bar
Power: 30, 7.5, 4, 22.5, 15 kW

... Dosanova offers a variety of efficient pumps e.g. for: wash-down systems, CIP systems, trolley washers,... The thoroughly tested range is built on more than 60 years of experience and includes very compact ...

Flow: 0 m³/h - 200 m³/h
Pressure: 24 bar
Fluid temperature: 100 °C

Food-safe pumps with a large suction chamber. Made in polished AISI 304 and/or 316 stainless steel for transferring products of low/medium viscosity.

Flow: 1,500 l/min
Power: 65 W

... FEATURES Small foot print, bench top. Silent and free from vibrations. Pump tube held by a simple clamp Glass dosing tip “PECIPUMP” provides precise dispensing. Dispense rate: The pump ...

... canals, rivers, tanks, tubs, etc. These pumps should be installed in a covered area, protected against the weather. Main Technical Pump body: cast iron Impeller: Brass Pump cover: ...

Flow: 10 l/min - 150 l/min
Pressure: 7 bar
Head: 15 m - 62 m

Self-priming horizontal multistage stainless steel pump suitable for domestic use, also in combination with autoclave tanks. Suitable for irrigation, drinking water or glycol distribution, water treatment, heating and ...

Flow: 0 us gal/min - 110 us gal/min
Head: 0'00" ft - 20'00"
Power: 0.03 ch

... acidic nature. Features High impact ABS tank Three 1" standard condensate inlet holes 6' Power cord with ground Built-in overflow safety switch Pellet media is a granular form of magnesium ...

Flow: 9 m³/h - 2,500 m³/h
Head: 12 m - 465 m
Power: 7.5 kW - 410 kW

... structure with motor and pump integrated, easy to install, maintain or disassemble, covers little floor space. It works safely and reliably, causes no pollution to water source. QJ Deep Well Submersible ...

Flow: 5, 3 m³/h
Pressure: 10 bar
Head: 14 m - 80.5 m

... reservoir and wells COMPACT CLOSE-COUPLED DESIGN ◘ Easy installation: the single-phase version have internal capacitor and thermic motor-protection thus is not necessary to connect the electric pump ...

Flow: 3, 1.5, 4 m³/h
Pressure: 20 bar - 124 bar
Power: 1, 5, 1.5, 0.5 ch

... Roll Cage and Heavy Gauge Steel Base, protects pump from damage.Stainless Steel Liquid-Filled Gauge ensures accurate readings with less flutter. Electric Driven Pump – EL Series These ...

Flow: 4 m³/h - 400 m³/h
Pressure: 1.6 MPa
Head: 20 m - 125 m

... with a high specific gravity. The YQMPS type pump is a YONJOU standard pump for all the applications listed. The YQMPS type pump can be customized with a heating cavity (heating ...

Flow: 96 l/min
Power: 1.1 kW

1'' (25.4 mm) Alumınıum Body EM Dıaphragm Pump Fluid Inlet-Outlet : 1'' NPT Housing Material : Aluminium Diaphragm Material : PTFE Valve Ball Material : PTFE Valve Seat Material : PTFE Fluid Inlet-Outlet : 1'' ...

Pressure: 2,000 bar - 7,000 bar
Power: 7.5 kW - 55 kW

... products As the only manufacturer of ultra high pressure amplifiers in France, HYDROPROCESS® offers a wide range of high-pressure pump from 2000 to 7000 bar and from 7.5 kW to 55 kW. Our ultra high pressure amplifiers ...

Flow: 0.1 m³/h - 300 m³/h
Pressure: 0 bar - 48 bar

... and loads on the rotor end, and the pump drive shaft. This significantly extends stator life, and ensures the mechanical seal is not adversely affected by shaft deflection. Many of our K range progressing ...

Flow: 9 us gal/min - 215 us gal/min
Head: 15 m - 92 m
Power: 0.08 ch - 5 ch

The T-Mag AM Series Mag Drive Pump consists of three sizes of a Mag Drive Pump, the 1/12, 1/4 and 1/3 HP. The fractional sizes are for low flow applications looking ...

Flow: 7.5 m³/h

... Top-quality model, fitted with electronic control Low oscillation of pressure High level of cutting pressure Air cooler not integrated in the pump Integrated electrical ...

DFEG-High Efficient inline circulating pump(Basic type)

Flow: 0.5 m³/h - 80 m³/h
Pressure: 12 bar
Head: 4 m - 240 m

CDM(F)E sériés vertical multistage intelligent variable frequency pump (Hereafter as CDME/CDMFE sériés or pump) is equipped with intelligent variable frequency controller. It can realize constant pressure, ...

Flow: 0.3 m³/h - 36 m³/h
Pressure: 4 bar - 15 bar

... meet the demands of food manufacturing customers. The pump is coupled to a screw auger (usually from a hopper above) that delivers the product into the pumping chambers as well as driving the pump. ...

Flow: 7 m³/h - 342 m³/h
Pressure: 6 bar - 24 bar

Inexpensive pumps for large flow rates The ED series is the first choice for applications with normal demands on energy efficiency, wear protection and high flow rates. The ED series is a further development of ...