|
|
500 SERIES - MEDICAL EQUIPMENT
Nonsparking cast aluminum housing. Aluminum base plate with nonskid conductive rubber base pad. Both models prewired with potted connector MS-3102R-18-4PW. Two pedal model wired with an electrical interlock and supplied with a divider bar between pedals which helps prevent accidental operation of both pedals at one time. Foot switch painted black.
600 SERIES - MEDICAL EQUIPMENT.
Medical Explosion Proof foot switch Series 600 is a UL Listed construction that allows the addition of sealing 0-rings on the pivot rod and between the base and cover. This is accomplished by increasing the thickness of the housing wall, without negating the integrity of the metal to metal contact required to qualify as explosion proof. The same specifications apply for the 600 Series as detailed for the 500 Series, except for a modest increase in weight and the mating connector required. Use mating connector MS or ~ which includes cable clamp, or CA-06R-18-45W-(Al 05)~(F74)* which includes cable clamp. |
|
This type is suitable for vacuum.
Direct, manually actuated valve series
- Flow rate: 600 l/min
- 3/2-way valve
- Normally closed
Type F foot valves are actuated by means of a foot lever. When the lever is released the valve returns to its initial position.
Accessories:
FH protective cover for foot valve
Can be repaired with wearing parts kit
|
|
APEM panel mount professional joysticks
- Easy to use, reliable and designed for extremely long service lives
- Switch, potentiometer or contactless industrial joysticks
- Optional sealing
- Single, dual or tri-axial industrial joysticks
- Wide choice of handles
- Handles using sealed pushbutton switches
- Highly configurable
Applications: CCTV cameras, marine (boat guidance), powered wheel chairs for handicapped persons, transport, hoists, industrial equipment, microscopes, medical equipment.
APEM, the broadest offering in the switch market: miniature switches, industrial switches, LED indicators, professional switch panels and professional joysticks. |
|
| EAO joysticks with 2, 4 or 8 positions and protection up to IP 65. The joystick control can be modified with different switching elements. |
|
ELAP joystick range includes a wealth of models with mechanical and electronic features which allow to employ them in several fields - marine, medical instruments, robot operations, civil engineering costruction machinery, precision machine tools - just to mention some.
- different sizes are available
- 2- to 6-dimensional coodinate types with several directions of lever operation
- motion controlled by precision potentiometers or Hall sensors and/or inductive sensors or microswitches
- different optionals available ( e.g.: special knobs, different lever shapes, dust-proof covers, spring return devices)
- specially tailored joysticks can be designed according to the customers' requirement |
|
| Electronic versions are becoming increasingly popular in the commercial vehicle industry. Especially if safety-relevant aspects are involved, a high reliability is required. The joystick range of elobau offers interesting solutions in this field. Specifically designed to meet your needs from the design stage through to serial production. |
|
| A wide range of fingertip and hand-operated joystick controllers for industrial applications. From simple forward-reverse levers to complicated multiple axis rugged controllers, we offer a choice of sensing technologies using long-life conductive plastic potentiometer tracks to Hall effect sensors. |
|
Welcome to Spohn Burkhardt
Our Products
Our production program includes a diverse range of controllers, control stations, resistors, starters, in addition to a broad spectrum of controls for all types of transport machinery, construction and shipping cranes.
Our comprehensive series production is customisable in many different ways according to specific needs.
Our Company
The firm was founded in 1920 by Karl Spohn and David Burkhardt and remains in family ownership.
Our highly motivated team strives to achieve maximum customer satisfaction starting with the first contact through to after-sales service.
Our recipe for success has remained consistent over the years – and effective:
flexibility in product development and reliability in production.
Quality standards
A high quality standard – and therefore the complete satisfaction of our clients is one of our most important aims.
This is confirmed by various certifications, e.g. DIN EN ISO 9001-2000, CCC as well as by national and international standards, IEC 947, EN 60947, CSA and UL
Plus d'information...
|
|
Traxsys produce a wide range of joysticks for all uses including:
Professional Desktop Joysticks for general desktop use and light industrial applications.
Industrial Desktop Joysticks for use in a wide range of applications up to and including both industrial and military.
3-Axis Desktop Joystick
Force Operated Joysticks ideal for use in mobile applications where shock and vibration contribute to generally harsh environments.
Fascia Mounted Metal Bodied industrial grade switches and heavy duty joystick available with a range of interface options. |
|
CTI’s precision control industrial joysticks (F Series mini joysticks) feature a non-contacting design, which ensures a much longer lifespan than other types of joysticks. These analog industrial joysticks are extremely precise, highly reliable, rugged, and drift-free. The F1000 Series OEM industrial joysticks design provides an excellent feel, morewhich is very responsive to touch and more user friendly than a touchpad.
CTI’s OEM joysticks are NEMA 4 (IP66) sealing and offer the following options; protection from extreme operating temperatures, protection from EMI, and a redundant safety feature. These rugged joysticks are ideally suited for harsh environments, precision instruments, and restricted spaces (e.g. wheel chair joysticks). CTI’s OEM industrial joysticks are also available as USB FlightSticks a.k.a. sidewinder joysticks. |
|
| a portable TRANSMITTING UNIT which communicates to the receiving unit, the sequence of digital data that is necessary for carrying out the command selected by the operator using the command devices (pushbuttons, selectors, joysticks). |
|
The T-JOY3 is a programmable joystick that can control three independent axes of motion. The joystick can be daisy-chained to any T-Series motion control products, allowing for a very flexible setup. All 5 buttons of the joystick are programmable to store a location, recall a location, or a host of other functions.
The joystick can run with or without a computer attached. In stand-alone mode the joystick is a compact controller that fits easily on the lab bench. Its functionality can be expanded simply by adding a computer or laptop running Labview, Visual Basic, Microsoft Excel, or your own program. The T-JOY3 programmable joystick is the ideal controller for microscope, x-y, or x-y-z stage applications.
The joystick is compatible with all T-Series products, such as the T-LS Motorized Linear Slides. |
|
Developed for reliable operation in a variety of environments. Conforms to UL Recognized Component Mark for Canada and the United States. All steel housing protects air bulb.
Tubing used is reinforced and connected to the foot switch with a molded grommet for pull-out protection. Remote switch has bulkhead mounting provisions. Wide operating temperature range. Twin foot switch models available. Can be mounted in a full guard.
Medical grade tubing is available
Size: 2.9" x 2.5" x 1.3" Weight: Approx. 1.0 lbs. (0.45 kgs.)
The new AIR-SEAL foot switch series combines a foot operated air bulb mounted in our strong, steel COMPACT housing and a remotely located air operated electric snap switch.
The AIR-SEAL is available in either momentary or maintained versions, with SPDT snap
switch. A 10 foot 1/8" ID PVC tubing connects the foot pedal to the remote air switch,
which is equipped with a 9/16" NF bulkhead mount. The tubing is connected at the foot
switch end using a molded on strain relief grommet providing superior pull out
protection. The AIR-SEAL can
also be mounted in the Linemaster Full Guard 522-B14 for
those applications which require full guarding of the foot switch pedal. |
|
The Varior Potentiometer foot switch was designed as a low cost foot control where a non-watertight housing is suitable. Four standard prewired 2 Watt linear models are available. The momentary models have a spring return pedal action, and the maintained models have adjustable friction pads. Maximum resistance must be specified when ordering. The foot switch has a drawn steel housing with black cover, complete with full treadle pad and nonskid base pad.
Also available in our heavy duty Hercules housing:
HERCULES POTENTIOMETER FOOT CONTROL
Environmental Ratings:
NEMA Type 1, 2, 4 & 13
Driptight - Dusttight - Watertight - Oiltight
EN 60529 Degree of Protection IP56
This foot switch is designed for use with variable speed motor drives and is available in selected 2 watt linear values. Specify the maximum resistance you want. Depressing the treadle rotates the potentiometer from zero to the selected maximum resistance shown below. By wiring to the third terminal it goes from the maximum resistance to zero. The treadle is spring loaded and returns to the normal position when the foot pressure is removed. A SPDT auxiliary switch contact rated at 15 Amps 125-250 VAC can be added to the control. The auxiliary switch will operate at the beginning of the treadle stroke. On special order, up to 3 SPDT switches can be added and adjusted for operation at any point of the treadle stroke. Details on switch size, weight, full shields and construction are the same as for the Hercules foot switches. "OX" Shield available |
|
ATLAS
HEAVY DUTY FOOTSWITCH
Environmental Ratings:
NEMA Type 1, 2, 4, 6, 6P & 13
UL ENCLOSURE 1, 2, 4, 6, 6P & 13
IP68
IEC 60601-2-2
Driptight - Dusttight - Watertight - Oiltight
Key Benefits
Foot switch developed for worldwide application
Snap action - SPDT and DPDT with forced disconnect (positive break) on NC contacts
Slow action mechanism with forced disconnect on the NC contacts - available as SPDT make before break or break before make
Direct PLC interface compatible (two-circuit bifurcated contact single-pole versions)
Galvanically isolated bifurcated contacts - NO and NC circuits can be wired to different loads and polarities
Foot switch has a rugged cast aluminum housing painted Alert Orange
Oversized "O" & "OX" shield models accept oversized safety shoes and metatarsal foot guards. The "OX" shield has an additional 3/4" (19.1mm) opening height as compared to the "O" shield
Single PG 16 threaded conduit entry is standard
U.S. and other international conduit sizes and side entry for twin or triple interconnect, available to the O.E.M. on special order
3 holes provided for rigid mounting to the floor or equipment
Size: 9" x 6" x 5-1/2"
Weight: Approx. 4-1/2 lbs. (2.1 kgs.)
|
|
| A heavy duty desktop joystick for use in a wide range of applications up to and including both industrial and military. |
|
| CTI Electronics IndustrialMouse® pointers are available as desktop, hand held, and panel mounted units, and are the perfect solutions for applications requiring reliable pointing/control input devices. These Industrial Mouse® pointers and control input devices (USB FlightStick a.k.a. sidewinder joystick) are NEMA 4X (IP66), and are designed as high precision instruments capable of working in the most demanding of environments. |
|
HERCULES
HEAVY DUTY FOOTSWITCH
Environmental Ratings:
NEMA Type 2, 4 & 13
UL ENCLOSURE 2, 4 & 13
CSA ENCLOSURE 2, 4 & 13
EN 60529 Degree of Protection IP56
Driptight - Dusttight - Watertight - Oiltight
Rugged cast metal enclosure has sufficient weight to keep the foot switch from sliding when being operated. Potentiometer version also available.
All models have a neoprene cover gasket plus O-rings on the activating shaft and a separate ground screw.
In all Maintained Contact models the release is accomplished by simply pressing the latch with a light forward movement of the toe. The release is placed under the Full Shield so falling objects cannot easily release it.
Oversize "O" Shield models accept oversized safety shoes and metatarsal foot guards. "OX" Shield also available
Special Dual 1/2" - 14 N.P.T. threaded conduit entry and metric sizes available to the O.E.M. on special order.
Special Twin models available to the O.E.M. on special order.
Painted Alert Orange.
Single 3/4" - 14 N.P.T. threaded conduit entry is standard.
3 holes provided for rigid mounting to the floor or equipment.
Size: 9" x 5-3/4" x 4-3/4"
Weight: Approx. 8 lbs. |
|
Honeywell electromechanical shifters are designed for off-highway applications requiring direction and speed control. They are completely sealed and are built to withstand the harsh environments of the off-highway industry. Mounting clamps for shifters and turn signals are available to order separately, with or without locating pin, for column sizes shows in order guides.
|
|
Driven by the CCTV market for camera control, and giving full pan, tilt, zoom in/out, iris open/close functions, Traxsys have developed a standard unit containing a quality 3-axis joystick and six associated buttons. However, we can manufacture full custom solutions to give the full functionality of the USB sidewinder interface the unit is designed to work with, i.e. 3-axis joystick, 8 buttons, slider and top hat. The drivers for the USB Sidewinder interface are already resident in Windows XP and are easily downloadable from the Microsoft website for use in other O/S platforms
SPECIFICATION
ENCLOSURE --- A.B.S. COLOUR MID GREY (PANTONE 429C).
JOYSTICK ------- THREE AXIS P+G JC2000. FEATURING BLACK PUSH
BUTTON HANDLE.
SWITCHES ----- GREY MEMBRANE PANEL WITH 5 OFF BLUE
MOMENTARY ACTION PUSH BUTTONS.
CONNECTOR -- USB SERIES 'A', 2M CABLE.
SUPPLY --------- 5V D.C. ±5% @ 150mA MAX.
OUTPUT --------- USB COMPATIBLE (MICROSOFT SIDEWINDER MODE). |
|
The original IndustrialMouse® offered in 1991 has been deployed in every type of application imaginable, across numerous industries. They are widely known as the most versatile and best industrial mouse pointers in the world. The Industrial Mouse® has an unmatched reputation for reliability, durability and availability.
The F1000 (industrial joystick pointing device) offers mouse cursor functionality, and the F8000, (industrial joystick mouse pointer with 3 button switch-pad) offers left, right, and middle mouse button functionality. Both Industrial Mouse® pointing devices offer IP66 sealing.
In addition, this series can also be used as control input devices (USB FlightStick a.k.a. sidewinder joystick) instead of traditional computer mouse pointers. The USB FlightStick (flight simulator) is an industrial input device that offers real-time response rates with pin-point precise accuracy for a broad range of application possibilities. These industrial computer input devices are ideally suited for harsh environments, precision instruments, and restricted spaces. |
|
| This variable controller to be used on Universal AC/DC fractional horsepower motors. The 980-SC3 is rated 6 Amps at 125 VAC and the 981-SC36 is rated 4 Amps at 250 VAC |
|
Introducing Linemaster's new infrared technology! The new IR Wireless System eliminates the nuisance of wires under foot while invisible infrared light waves fill the room with 360° of signal. And because it uses light rather than radio waves, it resists interference. So while all foot switches free the hands, the Linemaster IR System is so ingenious and so dependable, it will also free your mind. Only from Linemaster - American-made innovation at work.
Environmental Ratings:
EN 60529 Degree of Protection IP68 (Foot Switch)
Key Benefits:
- Range: Typically 40 feet
- Switch Functions: Maximum of 5
- Multiple systems can be operating at the same time in the same room:
4 separate transmitters and receivers, 2 separate transmitters and 2 receivers along with 2 transmitters paired to 1 receiver
2 sets of transmitters paired to 2 separate receivers
- Transmitter battery life: 200 hours @ 50 % duty cycle typical
- Power Consumption (Transmitter): Stand-by 100ua
- Power Requirements (Receiver): 6VDC @ 200ma
- Battery Powered Reciever optional
- Receiver Output: SPST relay, 0.5 amp contacts
- Low battery indicator
- Switch activation indicator(s)
- 360 degree transmitter
- Transmitter uses our industry proven Aquiline foot switch(es)
- No product calibration required - plug and go
- Uses industry standard batteries
- CE Marked
Certification
Classified to IEC/UL 60601.1 Medical electrical equipment by Underwriter's Laboratories, Inc with respect to fire, shock, and mechanical hazards in accordance with IEC/UL 60601.1.
Classified with respect to electric shock, fire, mechanical, and other specified hazards only, in accordance with Can/CSA C22.2 No. 60601.1
EMC Standards
EN60601-1-2: 2001
IEC 1000-4-2: 1995 Electrostatic Immunity
IEC 1000-4-3: 1995 Radiated Electromagnetic Field Immunity @ 10v/m
IEC 1000-4-4: 1995 Electrical Fast Transients Immunity
IEC 1000-4-5: 1995 Surge Immunity
IEC 1000-4-6: 1996 Conducted RF Immunity
IEC 1000-4-8: 1993 Power Frequency Magnetic Field Immunity
IEC 1000-4-11: 1994 Voltage Dips and Variations
EN 55011: 1998 Radiated and Conducted Emissions, Group 1 Class B
FCC Part 15 Radiated and Conducted Emissions, Class B
IEC 61000-3-2: 2000 Power Harmonics Class A
IEC 61000-3-3: 1995 + A1: 2001 Voltage Fluctuation, Section 5
Features:
- USB Compatible
- Easily replaces currently-used corded switches; just plug and go
- Long battery life
- No cord to restrict the user's movement
- Uses industry-proven Aquiline switches
SIZE:
Transmitter: 14.0"x10.0"x3.0"
Receiver: 5.0"x3.5"x2.75"
WEIGHT:
Transmitter: 5.5 lbs. w/ batteries
Receiver: .45 lbs.
|
|
Radio foot switch
with or without protective shield
low energy and radio emission
works without battery and totally self-sufficient
different coulours according to RAL |
|
| ... products without technical information |
| |
|
|
Control footswitches, Joysticks
