|
|
| Output can be mechanical, electronic, hydraulic, medium or heavy duty throttle controls. Variety of pedal styles used for trucks, construction, landscaping, farm equipment and buses. When used with available throttle cable, offers a quick and easily installed complete system. |
|
ADJUSTMENT LEVERS
SERIES AG10 - AG20 - AG30 - AG40
Control for flexible wire rope or push-pull cable with lever in stainless steel or in nylon and adjustment screw complete with adjustable friction.
All controls are supplied with wire locking holdfast and sheath adjustment screw.
Control for rigid transfer with stainless steel lever and little lever complete with adjustable friction |
|
600 SERIES - INDUSTRIAL CONTROL
Industrial Explosion Proof foot switch Series 600 offers added environmental protection against water and oil, through the addition of sealing 0-rings on the pivot rod and between the cover and base. This is accomplished by increasing the thickness of the housing walls, without negating the integrity of the metal to metal contact required to qualify as explosion proof. The same specifications apply for the 600 Series as detailed above for the 500 Series, except for a modest increase in weight.
500 SERIES - INDUSTRIAL CONTROL
Nonsparking cast aluminum housing. Aluminum full guard with integral base plate painted Alert Orange. All models supplied with a 3/4"-14 N.P.T. threaded rigid metal conduit entry and mounting provisions in the base plate. The two pedal model is supplied with a divider bar between pedals which helps prevent accidental operation of both pedals at one time.
|
|
Mechanical characteristics:
- Obstruction: 165 X 65 x35 mm
- Weight: 360 gr.
- Enclosure: Steel
- Color: Black
- Non-skid: Feet Rubber
Electric characteristics:
- Switch: 10 (2) 250 VCA, UL CSA VDE, Contactor, interrupter, reverser
- Wiring: Black PVC, 2 meters, 2 X 0,5 mm ², Grommets inarrachable |
|
Single and modular multiple foot switches PA, PX and PC series
Main data:
• Polymer housing, three conduit entries.
• Protection degree IP53 or IP65.
• 10 contact blocks combinations available
• Various auxiliary devices available: safety lever, pedal actuator suppliers lock and two stage actuating force
• Assembled through special joining kits: joining device, carrying rod, boxes with emergency push button and stabilizing plate
These switches series integrates the wide range of products that Pizzato Elettrica can offer to its customers.
For further information it’s possible to visit the web-site www.pizzato.com or ask for the general catalogue.
|
|
Food switches are mounted on machines and plants in cases where operation using the hands is not possible. They are used to start and stop operations and production processes.
Depending on the environmental conditions and mechanical duty, differing versions of food switches are used. The robust GF and GFS range switches are generally used in the engineering industry, e.g. on industrial presses, punching and bending equipment as well as in sheet-steel processing. Applications for the plastic KF range switches include use on laboratory apparatus, in the electro-medical area and on textile machinery.
Design and mode of operation:
All the foot switches are available in versions with multible pedals. GFS range switches are mounted with a shield to protect against unintentional actuation. GF and GFS range switches are mounted with slow or snap action or Hall sensors. GF-Ex and GFS-Ex range switches are EEx approved under the Certificate of Conformity PTB Ex-89.C.1051. The Ex 13 contact block carries the designation EEx d IIC T6. |
|
Pedal Switches
Strong aluminium housing. The unit is operated through a red, non-skid pedal which is covering the whole switch. An oil and chemical-resistant rubber membrane protects safely against dust and humidity (protection type IP65). Stroke limitation avoids mechanical overloading.
Aluminium pedal switches, modular contact blocks inside allow various contact possibilities. |
|
Turn signal switches are built to complement electromechanical shifters or can be mounted independently. A variety of operations are available such as wiper speeds, head lamp controls, button and auto cancel options.
|
|
| The Series 1025 Foot and Palm Switches are industrial-rated switches suited to applications where an operator must have both hands free to perform other functions or, where a highly visible switch is required for quick and easy operation. All of our switches are available in a wide choice of contact arrangements, ratings and enclosure styles. Industrial duty 4 way 5 port air cocks are available for air control circuits. |
|
| Tough all plastic lightweight construction footswitch offering a wide variety of switching combinations, it can be sealed up to IP68 upon request. Foot guard and colour options are available upon request. |
|
| Foot operated variable controller to be used on Universal AC/DC fractional horsepower motors. The 980-SC3 is rated 6 Amps at 125 VAC and the 981-SC36 is rated 4 Amps at 250 VAC. |
|
Welcome to Spohn + Burkhardt
Our Products
Our production program includes a diverse range of controllers, control stations, resistors, starters, in addition to a broad spectrum of controls for all types of transport machinery, construction and shipping cranes.
Our comprehensive series production is customisable in many different ways according to specific needs.
Our Company
The firm was founded in 1920 by Karl Spohn and David Burkhardt and remains in family ownership.
Our highly motivated team strives to achieve maximum customer satisfaction starting with the first contact through to after-sales service.
Our recipe for success has remained consistent over the years – and effective:
flexibility in product development and reliability in production.
Quality standards
A high quality standard – and therefore the complete satisfaction of our clients is one of our most important aims.
This is confirmed by various certifications, e.g. DIN EN ISO 9001-2000, CCC as well as by national and international standards, IEC 947, EN 60947, CSA and UL |
|
Mechanical characteristics:
- Obstruction: 200 X 140 X 38 mm
- Weight: 350 gr.
- Enclosure: ABS UL
- Base plate: ABS UL
- Color: Black
- Non-skid: Neoprene
Electric characteristics:
- Switch: 10 (3) HAS 250 VCA
- Enclosure: UL SCUMS VDE, NO, NF, reverser
- Wiring: Black PVC, 2 meters, 5 X 0,34 mm ², Grommets inarrachable |
|
Mechanical characteristics:
- Obstruction: 90 X 65 X 20 mm
- Weight: 230 gr.
- Enclosure: Steel
- Color: Black
- Non-skid: Neoprene
Electric characteristics:
- Switch: 10 (3) has 250 VCA, UL CSA VDE, Contacteur, interrupter, reverser
- Wiring: Black PVC, 2 meters, 2 X 0,5 mm ², Grommets inarrachable |
|
Introducing Linemaster Throttle Controls.
There are numerous applications for these controls, including use in various types of electric vehicles where accurate control of speed is required. Linemaster offers a rugged construction for long life, ergonomic friendly designs and ease of operation. If you have an application that requires a throttle control, please contact our Customer Service Department for details at 1-860-974-1000.
FEATURES:
Weather resistant components
Auxiliary Switch(es)
Retrofit Installations
Custom Cordsets
Mounting & Linkage Configurations
Arm Configuration |
|
500 SERIES:
Environmental Ratings:
CLASS I, DIVISION 1, GROUP D
CLASS II, DIVISION 1, GROUP F & G
CLASS I, ZONE 1, GROUP IIA
NEMA Type 2, 7D & 9F
UL ENCLOSURE 2
IP41
Nonsparking cast aluminum housing. Aluminum full guard with integral base plate painted Alert Orange. All models supplied with a 3/4"-14 NPT. threaded rigid metal conduit entry and mounting provisions in the base plate. The two pedal model is supplied with a divider bar between pedals which helps prevent accidental operation of both pedals at one time.
Size: 10-1/4" x 11" x 4-3/8"
Weight: Approx. 7-3/4 lbs.
600 SERIES:
Environmental Ratings:
CLASS I, DIVISION 1, GROUP D
CLASS II, DIVISION 1, GROUP F & G
CLASS I, ZONE 1, GROUP IIA
NEMA Type 2, 3, 4, 6, 6P, 13, 7D & 9F
UL ENCLOSURE 2, 3, 4, 6, 6P, 13, 7 & 9
IP68
Meets IEC 601-2-2
Driptight - Dusttight - Watertight - Oiltight
Industrial Explosion Proof foot switch Series 600 offers added environmental protection against water and oil, through the addition of sealing 0-rings on the pivot rod and between the cover and base. . The same specifications apply for the 600 Series as
detailed above for the 500 Series, except for a modest increase in weight.
|
|
Metal enclosure
1 or 2 pedal
With protective shield
Max. 4 contacts per pedal
|
|
500 SERIES - MEDICAL EQUIPMENT
Nonsparking cast aluminum housing. Aluminum base plate with nonskid conductive rubber base pad. Both models prewired with potted industrial connector MS-3102R-18-4PW. Two pedal model wired with an electrical interlock and supplied with a divider bar between pedals which helps prevent accidental operation of both pedals at one time. Foot switch painted black.
600 SERIES - MEDICAL EQUIPMENT.
Medical Explosion Proof foot switch Series 600 is a UL Listed construction that allows the addition of sealing 0-rings on the pivot rod and between the base and cover. This is accomplished by increasing the thickness of the housing wall, without negating the integrity of the metal to metal contact required to qualify as explosion proof. The same specifications apply for the 600 Series as detailed for the 500 Series, except for a modest increase in weight and the mating connector required. Use mating connector MS or ~ which includes cable workholding, or CA-06R-18-45W-(Al 05)~(F74)* which includes cable clamp. |
|
Switches approved to UL60601-1,IEC 60601-1
Multi-pedal footswitch, 1-6 pedal options
Compact for discreet placement beneath equipment, or for storage
Robust but aesthetic design
Enclosed rating IPX7 (IPX8) on request
Single pole normally open contacts rated 50mA 12Vdc or 30mA 24Vdc
Soft touch buttons with a light operating force
Choice of colours available
Choice of professional labels or logos available
Typical applications include wide range of Electrosurgical and Patient Handling
|
|
This type is suitable for vacuum.
Direct, manually actuated valve series
- Flow rate: 600 l/min
- 3/2-way valve
- Normally closed
Type F foot cocks are actuated by means of a foot lever. When the lever is released the valve returns to its initial position.
Accessories:
FH protective cover for foot valve
Can be repaired with wearing parts kit
|
|
APEM panel mount professional joysticks
- Easy to use, reliable and designed for extremely long service lives
- Switch, manufacturer of potentiometer or contactless industrial joysticks
- Optional sealing
- Single, dual or tri-axial industrial joysticks
- Wide choice of handles
- Handles using sealed pushbutton switches
- Highly configurable
Applications: PROFESSIONAL CCTV professional cameras, marine (boat guidance), powered professional wheel chairs for handicapped persons, transport, industrial hoists, industrial machines, suppliers of microscopes, medical equipment.
APEM, the broadest offering in the switch market: miniature switches, industrial switches, Led viewers, professional switching panels and professional joysticks. |
|
| EAO joysticks with 2, 4 or 8 positions and protection up to IP 65. The industrial joystick control can be modified with different switching elements. |
|
| Electronic versions are becoming increasingly popular in the commercial vehicle industry. Especially if safety-relevant aspects are involved, a high reliability is required. The industrial joystick range of elobau offers interesting solutions in this field. Specifically designed to meet your needs from the design stage through to serial production. |
|
|
|