- Power Transmission - Mechanical components >
- Bearing and Linear Guide >
- Ball joints, Wheel type rollers
Ball joints, Wheel type rollers
Outer diameter: 150 mm - 400 mm
Inside diameter: 20, 25, 30 mm
Width: 70 mm - 173 mm
R-001 Series Steel wheel with self lubricating nylon bushings and 2-shell structure with right-angled profile. Nylon bushings included as standard. R-031 Series Steel wheel with self lubricating nylon bushings hub and 2-shell structure ...
Outer diameter: 167 mm - 500 mm
Inside diameter: 42, 72, 62, 52 mm
Width: 70 mm - 225 mm
R-201 Series Steel wheel with bearing hub and 2-shell structure with right-angled profile. Bearing to be ordered separately. R-235 Series Steel wheel with bearing hub and 2-shell structure with rounded profile. Bearing to be ordered ...
Outer diameter: 220 mm - 500 mm
Inside diameter: 25, 30, 35, 50 mm
Width: 90, 100 mm
Steel wheel with bearing hub, mounted pin and 2-shell structure with right-angled profile. Bearing and pin included as standard, supplied already assembled.
Rod ends and spherical bearings “JOINBAL”. Characteristics: High misalignment angle High load admissible Long operating life Self alignment High safety Available types: Steel on steel Steel on bronze Steel on PTFE (maintenance free)
Spherical bearing ESBAL® Wide range availability: Red ends Spherical bearings 90° spherical articulations Rod ends for hydraulic cylinders Available types: Steel on steel Steel on bronze Steel on sinter bronze (maintenance free) ...
This high carbon stainless meets aerospace quality. With ball end configuration .0006mm tolerance always parallel and easy to install.
Maximum Angle: 13° Body Material: Mild Steel - Zinc Plated Ball Material: Steel - Hardened Bush Material: Brass Liner Material: PTFE Composite
Rod ends are specifically designed to be used for hydraulic cylinders. Ball joints and ball join-ends are typically used in a wide array of industrial applications together with yokes and pins. For the agricultural field, ball joints ...
Outer diameter: 48, 52 mm
Inside diameter: 8.2, 6.5 mm
Load capacity: 40 N - 250 N
The series 2130 is for universal use. It can, for example, be used as a side guide roller, and is suitable for conveying lightweight and medium materials. For medium-duty materials The series 2160 is for universal use. The series ...
Interroll
New HOT-RaceTM High Temperature Rod Ends and Linkages are now available from Cablecraft Motion Controls. HP Series rod-ends are designed to operate in high cycle, low to moderate load applications, demanding superior thermal stability, ...
Cablecraft Motion Control
Standards: DIN 71802 Form: CS Material: Steel Surface: Zinc plated Design: With circlip Thread type: Metric thread RoHS-compliant: Yes Ball joint with wrench flat and hex. nut
Outer diameter: 125 mm - 400 mm
•The drive wheels Φ 125, Φ 160, Φ 200, Φ 250, Φ 315 are carbon steel moulded, the Φ 400, Φ 400 R wheels are iron casting. •Wheels revolving on radial ball bearings permanent lubricated, the wheel Φ 400 R, increased capacity, is supplied ...
Rod Ends are forged and finished for applications not requiring flat contact with the head. All holes are reamed. Rod Ends can be used with spherical flange assemblies, flange nuts and clamp assemblies. Material:Alloy Steel and 303 Stainless ...
Jergens, Inc.
• Precision series • Double row • 10° permissible misalignment in either direction • These bearings are manufactured with an internal play of .0004 in. (.010mm) max. • Inner and outer raceway surface finish = 8 micro in. AA max. • ...
RBC Bearings
In track rollers and stud-type track rollers, balls are used as rolling elements and, like cam followers (with needles as rolling elements), they have a reinforced outer ring that serves as a running area and preferably has a spherical ...
Findling Wälzlager GmbH
Rod End Bearings, also known as a heim joint (N. America) or rose joint (U.K. and elsewhere), are a mechanical articulating joint. Rod End Bearings are used on the ends of cylinders, linkages, rods, and shafts to take up misalignment ...
The Hinged Gear Joint is primarily designed for use on hand powered, low-speed applications. U-joints are steel and operate at angles up to 136⁰.
Transport rolls for the forwarding Number of rolls: 2 Dimension: 0.6 - 2.0 mm
-Advanced design technology, ensure products bear high impact. -Special process for products, master the knowhow -High precision and quality control to improve the service life -Using the strengthened material ...
Model CF This model is a low-price Cam Follow having a driver groove or hexagon socket in the stud head. The all-stainless steel type (symbol M) is optimal for clean room applications since it does not develop rust from external atmosphere ...
THK
The Cam Follower is a specifically designed to provide a good quality performance and functionality for very specific purposes. It is considered as a standard stud in a heavy stud with a yoke type feature. It is also a patented RBD roller ...
Outer diameter: 40 mm
Main transmission rod Function: transmitting signal of filter (such as the signal at input and output end) and coupling signals to provide signal feedback for monitor, alarming and other system control and protection functions of ...
Used in aircraft components, such as wing flaps, engine and wing mounts and hatches, rod-end and spherical bearings function as joints. These bearings are also used extensively in helicopters, trains and automobiles.
Outer diameter: 52.5 mm - 149 mm
Inside diameter: 30 mm - 60 mm
Load capacity: 10,000 N - 353,000 N
Centric combined bearings Functionality and properties: Combined bearings are made of high quality steel and have hardened treads. The welding bolts can be welded to mounting plates or directly onto the support frame. Combined bearings ...
Technische Antriebselemente GmbH
Outer diameter: 82, 200 mm
Inside diameter: 20, 25 mm
A range of wide tread heavy duty polyurethane pallet rollers suitable for pallet trucks. These replacement pallet wheels and pallet rollers are ideal for upgrading your warehouse pallet trucks
The rod end sleeve bearing includes a head with a one-piece rod end that forms the rod end of a spherical plain bearing. Typically, rod end bearings have a left or right female(female)or male (male). Joint bearing with load capacity, ...
Hangzhou Ocean Industry co.,Ltd
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining