The development of self-lubricated guidance systems arises from the need to solve the existing problems involved in lubrication. These are due either to the difficulty of access or to the convenience of continuous and permanent lubrication, ...
Conveyor technology: Housing made of plastic, tons made of PUR Specifications Wheel-diameter (D): Structure:Polydirectional Wheel Wheel bearings:Plain bearing Material tires:Polyurethane Rollpur® Color tires:grey Material of ...
Outer diameter: 50 mm - 60 mm
Inside diameter: 12.7 mm
ROLLERS WITH NIB AND ORDER FORM Characteristics: All rollers are realized in nylon with 1 or 2 nibs, using the injection moulding technique; assembly on mm ; black or red colours 1 nib, red colour 1 nib, black or red colour 2 ...
START s.r.l. trasmissioni e comandi
Mounting of nozzles on standard threads Pipe offtakes Installation of manometers High temperature applications (up to 500 °C) Compatible with a wide array of nozzles with threaded connection Interchangeable with OS, OCS and OVS ...
Guide Rollers Modern Linear Guide Rollers incorporate double row, angular contact ball bearings resulting in excellent load capacity and long life under radial, axial, and combination loads. The super-finished raceways of Modern Linear ...
Modern Linear
- Body - 4340 alloy steel (AMS-S-5000), heat treated, cadmium plated. - Race - 17-4 PH stainless steel (AMS 5643), heat treated. - Ball - 440C stainless steel (AMS 5630), heat treated, hard chrome plated (AMS-QQ-C-320 Class 2). - The ...
AURORA BEARING
Special nylon ball joint to fit M4 threads. A=18.5mm Complete with 8mm ball, M5 stud Ball socket material: Black Nylon Stud material: Zinc plated, yellow or clear passivated mild steel Note: Recommended maximum force of 150N
Industrial Gas Springs
Outer diameter: 17 mm - 42 mm
Inside diameter: 5 mm - 12 mm
Load capacity: 820 N - 5,100 N
Track rollers with Gothic arch groove - type SG The function of series SG rollers is same as the series LFR rollers. But they are mainly used in the flat track and in the condition required compact structure. After rollers are installed ...
YITONG BEARING
rod end housing: forged steel, tempered, case hardened, bearing race, ground and lapped, rolled thread, surface galvanized inner ring: ball bearing steel, hardened, superfine ground lubrication: Polyrex EP2 or soap complex temperature ...
Durbal
Owing to 50 years experience in the industry, we are able to solve any motion problems, working out and designing the ideal product for customers' needs. We supply complete solutions that foresee the use of components which are assembled ...
The Jesa Bearing solutions provide the Over-molded Bearing, designed for different areas of application. The tool offers long life, high allowable loads, low wear, and quiet operation due to the synthetic material and optimized design. ...
Maximum Angle: 13° Body Material: Mild Steel - Zinc Plated Ball Material: Steel - Hardened Bush Material: Brass Liner Material: PTFE Composite
Outer diameter: 80 mm - 85 mm
Load capacity: 4,000 N - 8,300 N
WICKE-TOPTHANE® Pallet rollers (VULKOLLAN® 92 Shore A) • Rollers with WICKE-VULKOLLAN®-tyres moulded on metal core, with ball bearings Options: • RS ball bearings • Additional sealing inserts • Tube between the bearings
Outer diameter: 32 mm - 174 mm
Load capacity: 300 N - 1,750 N
wheels with ball bearing • Outer ring moulded in PA6 or delrin
APNYL
FEMALE FORK STANDARD DIN 71752 MATERIAL 11SMnPb30 (Steel) SURFACE TREATMENT White galvanized
Berardi Bullonerie srl
• Pneumatically-driven device for joint lock (-NO) or unlock (-NC). • Patented design with rotation fulcrum very close to the vacuum cup plane. • Small side displacement on rotation. • Minimal slide of the vacuum cup upon picking-up. • ...
• Not for compressed air (vacuum only). • They are mounted between the vacuum cup and its support with two female threads. • They allow the vacuum cup to be oriented at a predefined angle with respect to the support. • The angle is ...
Outer diameter: 26 mm - 35 mm
Inside diameter: 6 mm - 8 mm
Width: 9 mm - 11 mm
DEEP U GROOVE PLASTIC GUIDE ROLLERS Without/With Stud type are available. -Feature- -The plastic body provides silent running. -Deep groove holds the wire securely and allows using with pulleys. -Note- -Roller pin for the “Without ...
Imao Corporation
Outer diameter: 13 mm - 35 mm
Inside diameter: 4 mm - 8 mm
Width: 5 mm - 9 mm
FLAT PLASTIC GUIDE ROLLERS Without/With Stud type are available. -Feature- -The plastic body provides silent running. -Note- -Roller pin for the “Without Stud” type should be prepared by the customer. -Do not use in applications ...
Imao Corporation
Outer diameter: 13 mm - 35 mm
Inside diameter: 4 mm - 8 mm
Width: 5 mm - 9 mm
ROUND PLASTIC GUIDE ROLLERS Without/With Stud type are available. -Feature- The plastic body provides silent running. -Note- -Roller pin for the “Without Stud” type should be prepared by the customer. -Do not use in applications ...
Imao Corporation
Joint 45x45 standard For movable or rigid profile connections at any angle Swivel range 180° With marking in 15° increments Profile slot 10 Modular dimension [mm] 45 ESD yes Dimensions 45x45 Packaging unit 1 Swivel ...
Bosch Rexroth - Assembly Technology
Commercial and defense aircraft manufacturers need to build planes that offer durable support for interior service equipment, while ensuring the quitest cabin possible. Overhead stowage bins and other structures need to accommodate changes ...
Clevis for 135mm wheel with the possibility to add a torque arm for rolling base, pallet truck, trolleys...
Clevis for135mm wheel with the possibility to add a torque arm for rolling base, pallet truck, trolleys...
Clevis for 125mm wheel with the possibility to add a torque arm for rolling base, pallet truck, trolleys...
Outer diameter: 200 mm
Guide roller for manholes type Z-KS 119 with angled base, swivelling, galvanized • Roller diameter: 200 mm • Roller inner width: 80 mm • Dimensions: L x W x H 380 x 245 x 270 mm • Weight: 14,3 kg
We develop and supply seals and suspension components manufactured from rubber and plastic for use in the area of the ball joint. Continental develops and supplies rubber and polyurethane boot seals to protect the ball joint. Various ...
Fitted to a suction cup to avoid bending stress. Non-leaking design to work with Vacuum Check Valve and Vacustat. Available in a loose-fit, a locking version or one with 5° movement.
The rod end sleeve bearing includes a head with a one-piece rod end that forms the rod end of a spherical plain bearing. Typically, rod end bearings have a left or right female(female)or male (male). Joint bearing with load capacity, ...
Ocean Industry
The rod end sleeve bearing includes a head with a one-piece rod end that forms the rod end of a spherical plain bearing. Typically, rod end bearings have a left or right female(female)or male (male). Joint bearing with load capacity, ...
Ocean Industry
The rod end sleeve bearing includes a head with a one-piece rod end that forms the rod end of a spherical plain bearing. Typically, rod end bearings have a left or right female(female)or male (male). Joint bearing with load capacity, ...
Ocean Industry
Please specify:
Help us improve:
remaining