|
|
MET MANN presents its new VIS MANN air walls which provide an air barrier that prevents exterior air inflow.
Its main function is that one of keeping the premises internal temperature, preventing the heat loss inside of it.
We obtain a great energy saving thanks to this system, since the conditioning equipments work less.
The big range of air curtains allows they can be applied on professional doors of 3, 5 up to 5m high and from 1, 2 up to 2,5m wide. Due to its modularity, these curtains can be installed lined up, achieving so to cover any door width.
|
|
TMI, LLC (Trading & Manufacturing Industries) headquartered in Pittsburgh, Pennsylvania has air walls for any need; temperature control, insect control, environmental controls. TMI has the right air curtain for the job.
Commercial door units are designed to be aesthetically pleasing, quiet, and efficient. Light Industrial units are best suited for applications inside a plant or warehouse. These popular units are ideal for controlling unwanted airborne contaminates, such as dust or fumes. Medium Industrial are the most widely used of all industrial air door units. These air door units have the same size professional cabinet as our light industrial units, but have more powerful motors and professional fans for increased performance. Medium industrial air doors are often used on loading dock doors to control heating and air conditioning loss. Heavy Duty and Extra Heavy Duty air curtains are for the larger industrial doors.
All Save-T Air Doors/Air Curtains are easy to install, quiet, and efficient. Most doors can be ordered with either electric or hot water/steam heaters. Heaters are mounted to the intake side of the air door unit and can raise the temperature of the exiting air stream by as much as 30°F. Indirect Gas fired heaters are recommended for larger industrial doors. |
|
BABCOCK WANSON offers a complete range of solutions suitable for the heating of large spaces and smaller buildings :
- air unit heaters gas fired or for use with secondary heat transfer fluids ;
- warm air professional cabinet heaters gas-fired and light oil fired ;
- air handling devices, make-up air replacement heaters and modular units with exchangers, mixing chambers and professional filter sections ;
- radiant tubing, door heaters, destratification professional fan units.
BABCOCK WANSON manufactures equipment to deal with a variety of drying applications :
- heaters with direct combustion (up to 12000 kW and 1200°C) ;
- heaters with indirect combustion (up to 3000 kW and 300°C). |
|
Models:
Héliotherme (4 to 160 kW) air heater, propeller professional fan, hot water, superheated water, steam, electricity, chilled water, ATEX version, many options.
Silentherme (3 to 120 kW) air professional heater, centrifugal fan, silent, hot water or electricity, many options.
Gas-fired air heater (16 to 94 kW): propeller or centrifugal fan, many assembly accessories.
Transciat destratifier (2,450 to 10,700 m3/h)
|
|
MODULE FOR INCREASING TEMPERATURE
MM-050-TEC / MM-090-TEC / MM-160-TEC
DESCRIPTION:
Heating module designed for increasing the temperature of the air canalised inside of it (thermal difference of 17ºC to 60ºC).
Its big versatility turns it into an equipment with great application in the premises heating area, as well as in that one of materials drying processes as for example: furniture, metal pieces, vegetables, etc.
Its main features are:
-Operation with heating gas oil, natural gas or liquefied petroleum gases.
-Combustion professional oven made for achieving a performance of 90%.
-Tubular structure painted with black priming.
-External panel thermally and acoustically insulated.
-It has three operating thermostats manufacturers (professional fan start-up, professional burner stoppage and security thermostat).
-Fastening hooks for an easy transport.
The base equipment does not incorporate fan nor electric panel, but it can be supplied if you ask it so.
FUEL:
Heating gas oil / natural gas / LPG
APPLICATIONS:
Premises heating, products drying, etc.
|
|
The range of helicoid aerotherm consists in 7 different models used either in heating or cooling mode.
These equipment are intended to large volume buildings, store house, garage, workshop...
Aircalo aerotherm enables rapid heating or cooling volumes at the same time, mixing the air sufficiently to prevent its stratification (it is possible to complete this mixing by using zephir air professional recyclers).
Depending upon the characteristics of the building to be equipped, the Aircalo aerotherm may be hung (vertical blowing) or wall mounted (horizontal blowing).
CAUTION :
In cooling operation, the vertical mounting (horizontal blowing) should only be used. In this case, a condensate vessel is supplied.
These Aircalo aerotherm are designed to satisfy quality criteria and standards in force. |
|
Heater professional blower
Types: GH2, GH4, Revent
Tensions: 115V - 440V
Achievements: 2kW - 8kW
Safety class system I (protective grounding) enclosure: IP20
Temperature delimitation:
Partially with temperature limiter and partially self-regulating in dependence of the ambient temperature
Installation position: arbitrary |
|
ULTRAMIC™ 600 Advanced Ceramic Professional heater
When you need a lot of power in a small package, the ULTRAMIC™ 600 puts the performance of advanced ceramics to work for you. Constructed of aluminum nitride (AlN), the ULTRAMIC 600 can operate up to 600°C (1112°F) and deliver ultra-fast ramping of up to 150°C (270°F) per second for rapid thermal cycling applications.
The robust mechanical structure of the high density AlN enable these heaters to exhibit exceptional mechanical stability throughout the temperature range. This makes the product especially suitable in applications where consistent part-to-part thermal contact during heating cycles is critical. Additionally, these heaters are applicable when requiring a clean, non-contaminating heat source as they are particle free, impervious to moisture and resistant to acidic attack.
Applications:
Semiconductor wire and die bonding
Analytical instrumentation
Medical devices
Packaging
Aerospace |
|
U.L. Recognized - E56973 C.S.A. Certified - 016386-0-000
Applications:
Copiers, Dehumidifiers, Industrial glue guns, Heat Sealing Tools, Instrumentation, Resisters, Soldering and Desoldering Equipment, Cock Heaters.
Features:
-The Hotwatt Ceramic Heater is a ceramic body encasing a resistance element and packed within magnesium oxide.
-The heaters are terminated with flexible insulated lead wires.
-Temperatures to 1300°F (705°C)
Construction:
-Ceramic body
-Premium grade resistance wire element
-Magnesium oxide packing
-Ceramic end professional seal
-Flexible insulated lead wires |
|
Infrared SUNRAD Emitters is suitable for great radiant efficiency, thanks to the very high temperature of its emitting surface (900°C) and to its small dimensions.
SUNRAD emitters can be installed at considerable height (up to 30 m) considering they are provided with a reflector concentrating the radiation power.
Sempre più diffuso per il riscaldamento dei luoghi di culto |
|
A RANGE OF CERAMIC GAS HEATERS ADAPTED TO ALL HEATING NEEDS IN INDUSTRIAL PROFESSIONAL BUILDINGS (height of 4 meters and more).
Use: Industrial buildings, Churches, Sports halls, Car service, Terraces, ...
- a large range of heaters from 2,5 to 27 kW and more.
- a choice of 10 powers for a comfort in all type of buildings whatever the
hanging height of the heaters
- a double-speed option for a better comfort, particularly in well insulated
buildings |
|
| The DK Series is a line of 14 ceramic heaters in capacities from 30,000 to 160,000 Btu/hr, four in propane gas and ten in natural gas. Suitable for horizontal mounting or angled up to 35°, this series can meet a variety of spot and area heating requirements. |
|
Professional fan heaters of simple and robust design for heating recirculated air in areas such as workshops, factory shopfloors, warehouses, refectories, sports halls, garages, shops, greenhouse ...
Vulcanic manufactures a very large range of fan heaters, such as portable fan heaters, fan heaters with castors, and high power fan heaters for wall mounting. |
|
Their flexibility and fast heating feature make it necessary to use the Armagnac in premises such as :
- Sales and/or storage areas
- Sports hall
- Agriculture and breeding premises
- Industrial and commercial buildings.
Over a pleasant presentation, electric aerothem Armagnac are fitted with all components and accessories allowing a quick installation, a industrial safe and quiet operation.
- Armoured resistance
- Slow speed helicoid professional fan
- Power contactor
- Safety and control thermostats
- Fan timer
- On/off switch with light signal
- White RAL 9003 painted sheet steel frame, RAL 9010 lacquered deflectors protected with a removable professional plastic film.
Produced in 2 sizes, for power from 6 to 24 kW.
For powers from 15 kW to 24 kW only, the equipment is fitted with contactors allowing a two step operation if necessary. |
|
Major 2
The Major 2 professional fan coil unit is designed to be mounted vertically on a wall or horizontally below ceilings to heat and cool homes, businesses and industrial and healthcare facilities. Not only does it combine the economic benefits of installing and operating a central professional boiler and chiller plant, it also allows individual temperature control in all rooms.
Available in six sizes and two models:
- CH: horizontal cased,
- CV: vertical cased.
Heating capacity: 2 to 20 kW
Cooling capacity: 0.6 to 8 kW
Air flow rates: 115 to 1300 m³/h
- Polymer casing with solid RAL 9010 finish,
- Two access professional doors lead to air bleed cock and control terminal,
- Water coil: two or four tubes or two tubes and electric heater,
- Condensate drain pan,
- Seven-speed motor (three factory-wired speeds) with balanced, double-inlet aluminium professional blower wheel,
- Mounting bracket frame,
- Regenerative polyester fibre professional filter. Efficiency class: G3 (EN 779),
- Fully enclosed electrical junction box,
- A wide selection of control options. |
|
The gas heater KING is an independent appliance that
can be used as a great and convenient alternative to the
standard professional boiler house heating. With KING you have the
possibility to programme the temperature you want in
the room you need, with the possibility to programme
the temperature in every single room reaching therefore
and energy saving up to 30-40%. It is made up of an
elegant ivory varnished cover, a cast iron heat exchanger manufacturer
(with control window for inspection pourposes) that
guarantee a very silent working, of a professional burner with protective valve and wall flat fume/air kit that ensure a tight working
of the convectors with respect to the inner environment.
KING convectors can be used in houses, laboratories,
bars, shops, offices, and… wherever you want to
save energy! The working characteristics comply with
the standards UNI- CIG7129 for machines type C, gas
fired.
There is also the CLIMA-KING range with models from
7,2 to 13,3 kW which add to the heating function the airconditioning
function for summer time. |
|
Thalassa professional fan convector are reversible heating and air conditioning.
The offered range includes 4 models and 5 sizes, with powers from 5 kW cold production and 11 kW hot production.
Since there is poor residual pressure with this equipment (20 Pa), they are used preferably for direct blowing either hanging or wall mounted, with or without casing.
Easily integrated in any type of premises due to its discrete presentation and RAL 9010 epoxy painted frame.
Aircalo offers a wide scope of flow control customization. |
|
This unit has function of electrical convector and professional fan. This allows :
- In the winter, very fast heating ( 2 stage of power : 2 - 3 KW). Homgeneity of the air temperature thanks to outlet direction.
- In the summer, ventilation only with very low electrical consumption (35W)
Compact, esthetic
Régulation on board
Wall mounting |
|
Ribbed industrial heating elements/Industrial air duct heaters/Convectors
Ribbed resistance heaters are ideal for the convection-heating of air in stoves, industrial industrial ovens, drying professional cabinets and facilities, air-conditioning equipment etc. Ribbed heaters are generally used to heat air or non corrosive gas by natural or forced convection.
The heating elements are made of Z6 CNT 18-10 stainless steel (ST. ST. AISI 321) tubes of diameters 8.5, 10, 13 and 16 mm. The sheaths are fitted without clearance with electrogralvanized steel ribs.
Air professional duct heater are equipped with pin or spiral formed sheathed heating elements mounted on a stainless steel or galvanized iron casing. They are used to heat circulating air.
Convectors perfectly meet industrial requirements. They can be equipped with regulation devices.Waterproof and ATEX certified products are available for power ranging from 250W to 6kW.
|
|
Mechanically-bonded continuous fin assures excellent heat transfer and helps prevent fin vibration at high air velocities.
Several standard formations and mounting bushings available.
Standard fin is high temperature painted steel with steel sheath.
Optional stainless steel fin with stainless steel or incoloy sheath for corrosion resistance.
120v, 208v, 240v, 480v available.
Maximum Sheath Temperature
750°F (400°C) - Steel
900°F (480°C) - ST.ST./INCOLY
Made in U.S.A. |
|
Full range of heating professional cabinets gas or oil fired.
Available in vertical or horizontal versions, inside or outside and able of ducted appications.
Air flow from 6000 to 60000 m3/h and power from 70 to 1120 KW.
High temperature resistant steel exchanger or stainless steel.
For various cases, the body can be double skin.
Filtration optional.
Applications : Industrial buildings heating and/or ventilation with sveral kind of applications for high level confort for users.
This equipment is in accordance with European directive related to gas fired equipment 90/396/CEE under n° 49AQ1369 and 1370 and electro-magnetic compatibility CEM 89/336/CEE and low voltage 73/23/CEE. |
|
Craftsmen and construction workers value the many advantages of the practical heaters of the DZH series. Handy and problem-free to use, they are preferably suited for the de-icing or heating of construction materials, vehicles, equipment, water pipes, supply lines, and so on. These devices also provide for effective, immediate heat in closed, well-ventilated rooms
- Installed oil professional burner in a high-pressure system for EL heating oil or diesel
- Stainless steel combustion chamber
- Direct heater with 100% efficiency
- Integrated professional tank or Oil-reservoir professional fitting
- Easy to transport
- Fully automatic controls |
|
These equipment may be connected either with vertical or horizontal vent or through a chimney.
These aerotherms do meet the main requirements of the CE standards requirement related to gas-fired aerotherm.
CAUTION :
These equipment can only be used in sufficiently aerated premises, except where a tight connection is provided.
The proper operation of the aerotherm depends on a correct installation and start-up.
Aerotherm should not be installed in :
- Hazardous areas
- Premises containing vapours of chlorinated combination
- Areas with high contents of inflammable dusts
- Highly humid rooms. |
|
DESCRIPTION:
Gas domestic air heater with leakproof operation and smoke outlet through an industrial extractor.
Its operation is completely autonomous and its function is that one of heating the environment air of the premises that must be conditioned.
The basic equipment has the following elements:
- Leakproof combustion with forced draft.
- Combustion professional oven designed for obtaining a performance of about 90%.
- Three-speed professional fan (except for the GAS-40 model, which is one-speed).
- Air admission industrial filters.
- Environment supplier of thermostat.
- Air impulsion grid on the upper part (GAS-08-12-15).
FUEL:
Natural gas / LPG
APPLICATIONS:
Any kind of premises with a volume between 190 m3 and 980 m3.
|
|
SYSTEMA introduces the new series of EOLO, suspended warm air heaters able to solve all heating problems, both for total and modular space heating. Compared with traditional heating systems needing a separate professional cabinet, the new EOLO heaters offer an innovative solution for heating while keeping running costs at a minimum.
This is possible thanks to the fact that EOLOs are completely self-sufficient working units, and that you don?t need to heat up a heat transferring fluid such as water for heating the space. In this way you don't have any needless heat losses.
|
|
| The heaters are used successfully by farmers and gardeners. Whether in well-ventilated stalls, equipment sheds, or greenhouses, their mobility makes them practical and universal. The heaters are delivered ready for plug assembly. They are ready for operation after connection to the 230-volt a.c. mains and to propane gas professional cylinder(s). For energy savings, the devices can be delivered in automatic design (PGT) with a room manufacturer of thermostat that is ready for plug assembly. |
|
A RANGE OF CERAMIC GAS HEATERS ADAPTED TO ALL HEATING NEEDS IN INDUSTRIAL BUILDINGS (height of 4 meters and more).
Use: Industrial buildings, Churches, Sports halls, Car service, Terraces, ...
- a large range of heaters from 2,5 to 27 kW and more.
- a choice of 10 powers for a comfort in all type of buildings whatever the
hanging height of the heaters
- a double-speed option for a better comfort, particularly in well insulated
buildings |
|
A range of gas-fired industrial furnaces with 2 or 4 industrial burners. In full compliance with applicable safety regulations.
All models are equipped with a protection valve that interrupts the gas supply if the flame is extinguished. Economical, fast and clean: ideal for versatile operations.
Typical applications: heating of metals prior to working and creation of ornamental and other products. |
|
|
|
Heating equipment
