|
|
| Products 211 to 240 of 275 |
Industrial bus: Profibus DP
Accuracy class: 0,01 %
Insignal range: -4 - +4 mV/V
Loadcell Excitation: 5 VDC
Lastcellsström: Max 100 mA
Conversion rate: 3.25 - 30 conversions/s
Counts: -25 000 - +25 000
Internal counts: -400 000 - +400 000
Power supply: 24 VDC
Cabinet: Shielded metal cabinet
Mounting: DIN-rail (TS35)
|
|
The LCIC-WIM allows to connect most load cells and scales to a PC via the popular USB or RS232/485 ports.
The LCIC-WIM was designed to fit all real-time weighing and force measurement applications, like:Checkweigher, Weighing In Motion (trucks and rails),Batching and filling systems, Testing machines etc. this product helps our customers to easily design their controllers saving them engineering time and money.
|
|
|
Weighing amplifiers and transmitters are available, for example, for networking platforms in control and automation systems. A choice of versions is supplied for the diverse hazardous area zone classifications and approvals.
|
|
AST 3P / AST 3IS
Analogue output ±10 VDC, 0-20 or 4-20 mA. Digital output RS-485, MODBUS and via GATE 3 fieldbus communication.
WST 3
Analogue output ± 10 VDC, 0–20 or 4–20 mA. Serial communications: RS-485, MODBUS RTU protocol. Fieldbus interface: Profibus DP.
|
|
CAN-DY (Field Bus load cell Transmitter)
> Digital transmitter for 1 to 4 load cells of 350 W
> IP 66 plastic box
> 2 operating modes :
- RS 485 output modbus protocole
- CAN network output - CAN OPEN protocole
> With CAN network configuration, CHAINDY option is available
> Possibility to connect on the same Bus 13 CANDY transmitters
(Modbus, Profibus, Device Net, Ethernet)
|
|
|
|
|
|
TRANSMITTERS
JA - FIELD RANGABLE ANALOG TRANSMITTER
APPLICATIONS
-Strain Gage Measurements
- Load Cells
- Force Transducers
- Torque Transducers
- Pressure Transducer
- Transducer Interface To PLC/DCS
- Process Control
- Weighing Systems
- Level Monitoring and Control
- Intrinsically Safe Applications
- Cost Effective OEM/VAR Solutions
FEATURES
- High Performance Measurements-Grade Power Supply And Precision Amplifier
- Range Of Selectable Output Formats For Voltage Or Current
- Input, Output, Excitation And Zero Offset Parameters Are Field Configurable
- Compatible With Single Or Multiple "Summed" Transducers
- Preload Offsets Adjustable Up To 100% of Span Range
- Linear Optical Isolation Of The Input, Output And Power Supply Eliminates
- Loop Potential, Provides Common Mode Rejection And Reduces Noise Pickup
- Remote Sensing Is Selectable And Maintains Constant Voltage At the Transducer(s)
- DIN Rail Or Panel Mount Using Industry Standard Plug-N-Play 11-Pin Socket
- No Interaction Between Zero And Span
- Designed For Use In "Electrically Noisy" Industrial Environments
- Functional Test/System Calibration Pushbutton
- Easy Setup And Calibration
- Multiple LED's Monitor Input And Output Signal Levels
- Powers Up To (4) 350 Ohm And Up To (8) 700 Ohm Transducers
- Compact Case Dimensions Of Only 2.75" High X 2.38" Wide X 1.75" Deep
- The JB Series is A "Summing Transmitter" Version Integrated With A Four Channel
- Summing Module In A NEMA 4/4X Enclosure
- NEMA 4/4X And Explosion-Proof Housings Are Available
- The JD Series Is A Low Cost "Fixed Range" Alternative To The "Rangeable" JA Series
- One Year Warranty
|
|
The unit AST 3IS is a DIN rail mounted, high performance isolation amplifier designed for applications with strain gauge transducers inside hazardous areas.
AST 3IS has at its heart a unique Nobel patented analogue to digital converter. The unit is equiped with analogue as well as digital outputs which can be conditioned to give the user accurate, stable and fast response measurement information.
|
|
|
|
|
|
Transmitter - AST 3IS
AST 3IS
* Unique design to allow transducers in hazardous areas without the need of zener barriers
* Analogue output ± 10 VDC, 0-20 or 4-20 mA
* Seriel communications: RS-485, MODBUS RTU protocol
* Relay outputs
* Compact DIN rail mounting
* CE compliant - EMC and Low Voltage
The unit AST 3IS is a DIN rail mounted, high performance isolation amplifier designed for applications with strain gauge transducers inside hazardous areas.
AST 3IS has at its heart a unique Nobel patented analogue to digital converter. The unit is equiped with analogue as well as digital outputs which can be conditioned to give the user accurate, stable and fast response measurement information.
The transmitter is fitted with two relay outputs having a short response time for use in high precision level control applications.
The AST 3IS is compatible with other instruments in the Vishay Nobel programme and can communicate via the RS-485/MODBUS RTU protocol with a common process control host - PC/PLC. Fieldbus communication is possible via the GATE 3S module from Vishay Nobel.
* [EEx ia] IIC approved
* Excellent performance in spite of EX version
* Fully isolated
* Simple earting (compared with zener barriers)
* Direct connection of transducers in hazardous areas without the need af zener bariers
|
|
The advantages of piezoelectric sensors are particularly evident in force measurement. Robust and overload-proof, they are capable of resolving the smallest changes in force, even with high preload.
|
|
|
|
|
|
PCB® Series 5400 Wheel Force Transducers are designed as rugged one-piece sensors that mount between the vehicle hub and the wheel rim, delivering highly accurate road load data measurement and superior performance in a durable water resistant package. Possessing superior temperature compensation properties and integral overload stops, these sensors provide a high level of confidence in data acquired during aggressive road events, including heavy braking tests.
Available in a wide variety of sizes for vehicles including passenger cars; light-, medium- and heavy-duty trucks; commercial vehicles including tractor trailers, buses, agriculture, and earth-moving equipment; and military vehicles. Passenger car and light truck units use a custom hub adaptor to accommodate a wide range of vehicle sizes while maintaining vehicle geometry. Heavy truck units mount directly to the vehicle hub. All units can be fitted with either slip ring or telemetry signal transmission, and come equipped with on-board signal conditioning and calibration circuitry for each channel of data measurement, making their setup and use with the Transducer Interface Unit (TIU) quick and easy.
These sensors are also ideal for calibrating and adjusting biaxial wheel test machines; drive-file development of full vehicle and module test systems up to 6
Degrees of Freedom (DOF); and product development of stability control, brake systems, suspension, and tires.
|
|
| ... products without technical information |
| |
|
|
Weight sensors, Force sensors, Torque sensors
